2. Remove the batteries by turning the thermostat over and pulling the ribbon.

To change your batteries:

  1. Press the tab on the base of your thermostat.
  2. Lift your thermostat off the hooks that hold it against the wall and turn it over to access the batteries.
  3. Simply pop the batteries out and put the new ones in.

Also know, what batteries does hive thermostat use?

  • Pack of 20 AA Alkaline 1.5 Volt Batteries.
  • Improved anti-corrosion components and new zinc composition give the batteries a 10-year, anti-leak shelf life.
  • Designed to provide reliable and lasting performance for both high and low drain devices.

Also Know, is the hive thermostat battery powered? Power supply The Nest thermostat needs to be powered by the mains which may restrict where you position it in your home. The Hive thermostat, by contrast, can be powered by AA batteries which gives you more flexibility. British Gas claim the batteries will last for up to 2 years.

Considering this, how do I reset my hive thermostat?

To reset the thermostat, hold the thermostat in your hand with the back facing you. Hold down the ‘+' and ‘-‘ buttons on the front of the thermostat at the same time. Keep a hold of those buttons while putting the battery back in and keep holding them in until the word ‘FIND' appears on the screen.

Why is my thermostat using up batteries?

The simplest answer is also the most likely: The thermostat is old or just faulty. The temperature settings you program into a digital wall thermostat don't impact battery usage (e.g., turning down the air conditioning in the summer won't save the battery life of your thermostat; you'll just save on your energy bills).

Related Question Answers

Does hive work without wifi?

If it loses connection to the internet, or if the thermostat loses connection to the hub, you won't be able to control your thermostat remotely. If your heating or hub is offline, your Hive app will show you and tell you what's going wrong.

Can the hive thermostat be wired?

Hive 2 Thermostat for HVAC systems

This is the version of our thermostat designed for the USA and Canada. It can manage heating, cooling and humidity and is wired directly to your HVAC system.

Does hive need a power supply?

Does the Hive Thermostat require batteries? No, it uses continuous power from the C-wire.

How long do thermostat batteries last?

Some batteries can last as long as 5 years while others might not make it 3 months. Even if your thermostat is hardwired, it will probably have a back-up battery that will need to be periodically replaced. But don't be upset—the back-up battery allows your system to work even if there is a glitch in the power system.

Where do I put the hive thermostat?

Where should I place my Hive thermostat stand? Aim for around 1-1.5m from the floor and away from heat sources such as radiators and direct sunlight. To make accurate temperature readings, your thermostat needs a free flow of air so please ensure you place in an area not covered by curtains or similar objects.

Is hive battery operated?

The nest includes a network hub, the thermostat and a regulator that connects to your boiler. The system is mains powered whereas the hive is also battery powered so you can position the thermostat wherever you like.

How do I reset my hive app?

To reset your Hive Active Plug, press and hold the button on the front for ten seconds. Once you see the light double flashing amber, you're done! Try installing your Hive Active Plug in your Hive app or online dashboard again. If you're still not back up and running please contact us.

Why is my hive thermostat not connecting?

Lift your thermostat off the hooks that hold it against the wall and take your thermostat to the receiver which you will find near to your boiler/hot water tank. Remove the batteries and put them straight back in again. This will turn the thermostat off and on which should help establish a connection to the receiver.

Why won't my hive thermostat connect?

With the receiver status showing flashing amber/yellow and the thermostat in searching then go in to the hive app and select the option to install a device and then select other hive devices. If the thermostat is still not pairing up then try moving it closer to the hub, this should help you get it back online.

Can you reset a hive hub?

To reset the Hive Hub do the following: 1. Remove the batteries then turn off the boiler and receiver. Place the batteries back into the thermostat and press and hold down the menu and back buttons at the same time.

How long does a hive thermostat take to pair?

Firstly, plug the hub into the router first using the new ethernet cable provided and then into the power. The hub will flash green (for up to 30 minutes) and will show a solid green with a flashing amber when it is ready to pair.

How do I connect my hive thermostat to the app?

Press and hold both the left (back/”button 8″) and middle (menu/”button 7″) buttons on the bottom of the thermostat. On the app, go to “install a device”, “add another device”, “Go”. Devices should then all link and the status light should go green on the receiver.

How do you reset a hive radiator valve?

You can also reset a Hive Radiator Valve directly as follows:
  1. Take the batteries out (Please see the User Guide for more info)
  2. Hold down the button below the screen (see the image below)
  3. Put the batteries back in while still holding the button down.
  4. Continue to hold the button down for 5 seconds.

Are smart radiator valves worth it?

How much do thermostatic radiator valves cost? Electronic/smart TRVs are also worth considering, as part of a smart heating system. This way, you can control each separate radiator from an app on your phone, even if you're away from home. This is the best way to control heating and track energy usage.

Do I have to pay for hive?

The Hive Active Heating subscription is no longer available. We now offer a 12 month payment plan as an alternative. The plan allows you to spread the cost of the kit over 12 months. Once the 12 months are up, you can continue to pay £2.99 a month for Hive Live or cancel the Hive Live subscription and pay nothing.

How does Hive know the temperature?

The actual temperature is determined by the surrounding area of the thermostat so, for example, if your thermostat is in a location which is warmer than the rest of your house it would mean that your target temperature is going to be reached more quickly.

Can hive control individual radiators?

Hive Radiator Valves only require a Hive Hub and the Hive app and can work with your existing heating set-up. However, without Hive Active Heating, they will only be able to control the heat from individual radiators while your heating is on.

How do I get rid of hive TRV?

Please follow these steps to take your Hive Radiator Valve (TRV) off your radiator:
  1. Press the button under the screen for 3 seconds.
  2. Hold the valve either side of the screen and rotate it anti-clockwise until the tab is visible.
  3. Depress the tab and, while keeping the tab depressed, slide the casing off.