On the TV remote control, press and hold the UP ARROW button. Make sure the remote control is pointed towards the front and centre of the TV. While holding the UP ARROW button, press and release the POWER button on the TV set. Depending on the TV, Reset will appear momentarily on the lower left hand corner of the TV.

Then, how do I reset my Sony Bravia TV to factory settings?

To run a factory reset, select the “Home” button on your remote. Select “Settings” followed by “Storage & Reset,” “Factory data reset,” “Erase everything” and lastly, “Yes.” This process is called a data reset, and it erases your entire history and stored data while returning everything to the default settings.

how long does factory reset take on Sony TV? The TV will auto Factory data reset within one minute of the first Welcome setup screen. NOTE: If the TV doesn't turn back ON automatically, press the Power button to turn the TV back ON.

Similarly one may ask, how do I reset my Sony kd60x690e?

  1. Point the remote control to the illumination LED and press and hold the POWER button of the remote control for about 5 seconds until a message Power off appears. [1]: illumination LED.
  2. TV reboots automatically.
  3. TV reset operation is complete.

How do I factory reset my Sony Bravia TV without remote?

You can access the Sony Bravia settings without a remote and perform the full reset. Locate the manual controls on your television and select the “Menu” button to pull up the Sony Bravia settings without using a remote. Use the channel-down button to navigate the options and select the “Settings” option.

Related Question Answers

How do I reset my TV to factory settings?

Hold down the menu button on the top or side of your TV for at least 10-15 seconds. An on screen menu will appear asking you to enter the time, date and location settings. Follow the onscreen instrucitons, and once completed your TV will reset to factory settings.

How do I reset my Smart TV to factory settings?

How do I reset my Samsung TV to factory settings?
  1. Step 1: open the menu. Press the menu button on the remote.
  2. Step 2: open Support. Select the option Support and press the enter button.
  3. Step 3: open Self Diagnosis. Select the option Self Diagnosis and press the enter button.
  4. Step 4: select Reset.
  5. Step 5: if needed, enter your PIN code.
  6. Step 6: confirm the reset.

How do I get my Sony Bravia out of demo mode?

Set Demo Mode and Picture Reset Mode to Off.
  1. Press the HOME button on the remote.
  2. Select. Settings on the HOME screen.
  3. Select. Preferences or System Settings. NOTE:
  4. Select Shop-front Display Setting.
  5. Demo Mode and Picture Reset Mode are displayed.
  6. Set Demo Mode and Picture Reset Mode to Off.

How do I reset my TV without a remote?

You can reset and eliminate the lock on some televisions without the remote, using a few tactics. Hold the power button for five seconds. The television will automatically restart. If the lock is still on, unplug the television and remove the battery from the back panel of the television.

How long does it take to factory reset a phone?

If you are talking about a factory reset, I would say it takes about 10 minutes to complete. Note: A factory reset erases all data on your phone and brings it back to a default factory state. In many cases you can initiate a hard factory reset by switching off the phone and starting it up by pressing POWER+VOLUME UP.

What does flashing red light on Sony TV mean?

System Error: If a Red LED is blinking and the TV is not working properly it means that the TV has detected an issue or problem. Most Red LED blink conditions require service.

How do I reboot my Sony Smart TV?

How do I perform a (soft) restart (reset) or Power cycle on Sony's Android TV?
  1. Point the remote control to the illumination LED and press and hold the POWER button of the remote control for about 5 seconds until a message Power off appears. [1]: illumination LED.
  2. TV reboots automatically.
  3. TV reset operation is complete.

How do I factory reset my Sony Android TV?

Option B: Factory Data Reset
  1. On the supplied remote control, press the HOME button.
  2. Select Settings.
  3. The next steps will vary depending on your TV menu options: Select Device Preferences → Reset → Factory data reset → Erase everything → Yes. Select Storage & reset → Factory data reset → Erase everything → Yes.

How do I reset my Sony remote control?

How to reset the remote control.
  1. On the remote control , remove the batteries .
  2. Press and release each button on the remote control two times.
  3. Install new alkaline batteries.
  4. Replace the battery cover .
  5. Ensure there are no obstructions between the satellite receiver and the remote control .
  6. Ensure that none of the buttons appear to be stuck.

How do I clear the memory on my Sony Bravia smart TV?

Clear Data and Clear Cache on your Android TV
  1. On the supplied remote control, press the HOME button.
  2. Select Settings.
  3. The next steps depend on your TV menu options: Select Apps → See all apps → Show system apps.
  4. Under System apps, select your preferred app.
  5. Select Clear cache, then select OK.
  6. Select Clear data, then select OK.

Why does my Sony TV keep rebooting?

Your Sony BRAVIA KDL-46XBR9 TV may reboot due to a damaged AC power cord. In this case you can usually resolve the rebooting problem by replacing the power cord. Your Sony BRAVIA TV may also reboot because of a bad power supply in the TV. The BRAVIA KDL-46XBR9 may also reboot because of incorrect settings on the TV.

Where are settings on Sony Bravia TV?

button on the remote control to display the Settings menu on the TV screen. In the menu, select Settings to display a list of settings. You can customize features, such as picture and sound settings, while watching a program. You can also select Edit to add frequently used settings or to remove unnecessary ones.

Why is my Sony TV not connecting to the Internet?

If the Physical Connection setting appears as Failed: Make sure that the Ethernet cable is securely connected to the TV and to the router; if possible, try other LAN ports on the router. If determined that the router or the modem is not connected to the internet, contact your Internet Service Provider (ISP).

How do I reset my Sony Bravia remote?

On the TV remote control, press and hold the UP ARROW button. Make sure the remote control is pointed towards the front and centre of the TV. While holding the UP ARROW button, press and release the POWER button on the TV set. Depending on the TV, Reset will appear momentarily on the lower left hand corner of the TV.

How do I get the menu on my Sony TV without the remote?

Press the “Home” or “Menu” button, depending on what your TV model says, and the menu will be displayed on your TV's screen. To operate the menu, you will have to use the “Volume” and “Channel” buttons to scroll through the various menu options.