In order to perform a “factory reset“, simply press the volume up (+), down (-) and multi function buttons simultaneously for a couple of seconds until the red LED rapidly flashes for two seconds. The headphone is now reset and can be paired with a new device.

Just so, how do I turn on my Aukey wireless headphones?

Pairing is as easy as it gets: hold down the power button (Aukey logo on right headphone) for about 5 seconds or until you see it flash red and blue. Jump into the Bluetooth settings on your mobile device and find it listed as Aukey EP-B4.

One may also ask, how do you fix one side of Bluetooth headphones not working? When one side of the earbud does not play sound

  1. Power off and restart both sides of the earphone.
  2. Wait for the transmitting device find your earphone and reconnect. You hear the announcement “Your Device Has Been Connected” when it's done.
  3. Wait both sides of the earphones find each other and reconnect. You hear the short beep when it's done.

In this regard, how do you reset Bluetooth headphones?

Turn on the desired Bluetooth device and enable pairing. You could also delete paired information on the Bluetooth device and pair again. For reset just hold power button for 15 seconds and it will reset the headphones.

How do I connect my Aukey Bluetooth headphones to my Iphone?

Press and hold the multi function button (middle) on the headset control unit for approx 6 seconds. The LEDs will flash red and blue. The headphones are now ready for pairing and can be connected with other Bluetooth enabled devices.

Related Question Answers

How do you pair magnetic headphones?

2. You can just pair the earphones with your cell phone just like after the factory. Make sure the headphones are turned off, then press and hold the multifunction button for approximately 5 seconds until the LED indicator flashes red and blue alternately. Now the headset is in pairing mode.

How do you charge Aukey Bluetooth headphones?

To charge, simply connect one end of the micro-USB cable to a USB charging port and the other end to the input port on the earbuds. When the red LED indicator light turns blue, your earbuds are fully charged and ready for use. Charging takes around 1.5 hours.

How do I pair my Voltix Bluetooth headphones?

Bluetooth Pairing:

Press and hold ON/OFF button on ear speaker for 3 seconds to turn on the headphone. The blue indication light will flash showing headphone is pairing and the headphone starts searching for Bluetooth device. Select “PBT-BT” on music device to pair from the Bluetooth list.

How do I pair my Aukey Bluetooth speaker?

Pairing is initiated when the Aukey speaker is first powered up, otherwise you need to (with the speaker turned off) press and hold the power button for two seconds. There is a small LED light on the face of the speaker that flashes blue to confirm the speaker is in pairing mode.

Why is only one of my earbuds working?

There can be many reasons that a pair of headphones only play audio out of one ear. The most common reason for sound to only come out of one side is the wires near the audio jack have gotten bent back and forth so many times that it has caused a short in the wiring.

Why is my Bluetooth headset not pairing?

Some devices have smart power management that may turn off Bluetooth if the battery level is too low. If your phone or tablet isn't pairing, make sure it and the device you're trying to pair with have enough juice. 8. In Android settings, tap on a device's name, then Unpair.

Why are my Bluetooth headphones not connecting?

Solution 3: Restart Your Phone and the Device

Switch on Bluetooth by pulling down the notification shade of your phone and tapping on the Bluetooth icon after your phone restarts. Make sure that the device is in pairing mode. Keep it close to your phone and give your phone some time to scan all the nearby devices.

How do you reset wireless headphones?

Reset your Wireless headphones
  1. Switch off the headset.
  2. Hold the multifunction and volume down buttons for eight seconds.
  3. Watch for the red and blue indicator lights to alternate three times.

How do you reset earbuds?

Just remove the wingtip and use a paper clip to press and hold the Power/Restart button for 10 seconds. The earbud will turn off. Press and hold the Power/Restart button again, and then release the button once the indicator light flashes three times. The earbud will restart.

How do I put my JBL headphones in pairing mode?

If you have paired your device previously, you can manually put it in pairing mode by holding down the Bluetooth button for at least 3 seconds, until the LED flashes (JBL speakers typically have a dedicated Bluetooth button. For JBL headphones, the Power button usually doubles as the Bluetooth button).

How do I fix my Bluetooth headphones?

Both are equally frustrating experiences, but come with equally easy solutions.
  1. Keep within range of your headphones and smartphone.
  2. Remove any unnecessary Bluetooth connections.
  3. Make sure your Bluetooth headset has enough battery power.
  4. Try unpairing your headphones and then re-pairing them with your smartphone.

How do I reset my Bluetooth?

Clear Bluetooth Cache – Android
  1. Go to Settings.
  2. Select “Application Manager”
  3. Display system apps (you may need to either swipe left/right or choose from the menu in the top right corner)
  4. Select Bluetooth from the now larger list of Applications.
  5. Select Storage.
  6. Tap Clear Cache.
  7. Go back.
  8. Finally restart the phone.

How do I fix my headphones not working?

  1. Step 1: Cut the cable and prepare the wires. You might cringe a bit, especially if your headphones are fancy, but it's really not that big of a deal.
  2. Step 2: Tin the wires. Now turn on your soldering iron.
  3. Step 3: Solder the wires to the plug.
  4. Step 4: Test it.

Why is only one side of my Bluetooth earbuds working?

If only one speaker side works when connecting via Bluetooth (wireless), this means that one of the small mechanical triggers in the jack port is stuck in a position of halfway, this will tell your headphone speakers to function via the audio aux cable instead of the Bluetooth technology…

How do you fix earbuds when only one side works?

Method 1 Taping Defective Earbuds
  1. Identify the problem area. Slip the earbuds in your ears and play some music.
  2. Twist the cord until the earbuds begin working. Bend, straighten, and adjust the cord around the damaged site.
  3. Tape the cord to hold it in place.
  4. Consider purchasing a replacement pair of earbuds.

How do you pair left and right earbuds?

How to pairing the i12 TWS left and right earbuds?
  1. Step 1: Delete the left and right erbuds pairing information (Reset the i12 TWS).
  2. Step 2: Long press the function key for 5 seconds to turn on the i12 TWS.
  3. Step 3: Enter pairing mode, pairing time is about 5 seconds, prompt tone “pairing mode”.

How do I reset my wireless Bluetooth headphones?

EASY BLUETOOTH HEADPHONE RESET: Turn off bluetooth headphones, reset bluetooth headphones by pressing power button for 15 seconds, delete the bluetooth headphones from your phone or device paired list, restart your device and re-pair the bluetooth headset.

How do I connect my air vibe?

Here's how to connect AirPods with Android phones and tablets.
  1. Open the AirPods case.
  2. Press and hold the rear button to initiate pairing mode.
  3. Go to the Settings menu on your Android device and select Bluetooth.
  4. Find the AirPods on the list and hit Pair.

Why is my Bluetooth not working?

2.2 Restart Android and turn on Bluetooth again

Turn your Android device off by holding down the Power button. Wait for several minutes and then turn your phone on again. Wait for your phone to completely power up, so you're on the main Menu. Navigate Settings > Bluetooth and then enable the setting.