Unlike conventional systems the mound system will require two separate tanks. The first will be a standard septic tank buried at a depth of 10 to 16 inches and located a minimum of 10 feet from the foundation of the house.

In respect to this, how much space is needed for a mound septic system?

Install the two tanks. Unlike conventional systems the mound system will require two separate tanks. The first will be a standard septic tank buried at a depth of 10 to 16 inches and located a minimum of 10 feet from the foundation of the house.

Additionally, can a mound system be put anywhere? It costs a great deal of money to install these systems, but they can be placed anywhere. A mound septic system has no container, and digging too far gets you too close to the water table. This means instead of digging down you have to dig out. This causes a problem because you need a larger space for the trench.

Subsequently, one may also ask, do mound systems need to be pumped?

Mound Systems Are Practical and Ecological This liquid waste (effluent) is then pumped to the above-ground tank. As with an underground septic system, the mound system also needs regular pumping from the solid waste tank. Above ground septic tanks do require additional room and expertise.

How much does a mound septic system cost?

A mound septic system has an average cost between $10,000 and $20,000, but may cost more for exceptionally large systems. It is important to regularly maintain the septic system, with annual maintenance and pumping having an average cost of $500.

Related Question Answers

Should you mow a septic mound?

To prevent compaction, do not allow any vehicles or heavy equipment on the mound. When mowing the lawn, use a hand mower, rather than a riding mower. Inspect the mound for any patches of bare soil and plant them with grass or other cover. Help prevent septic system failure through regular maintenance and inspection.

How long does a sand mound last?

40 years

Can you drive on a mound system?

Locally, a mound system is created by scraping the site, adding a layer of sand, then a layer of gravel, then the pipes, layer of gravel, layer of sand, layer of clay to seal, then a layer of topsoil. Driving any machinery over it is not a recommended practice.

Why do I need a mound septic system?

A mound septic system is used for aberrant soil conditions. In order for effluent (waste water) to be completely treated it must pass slowly through 3 feet of dry soil. A mound septic system is also used when you have rocky soil because the effluent will run right through it without being treated.

What can I use instead of a septic tank?

Two alternatives to the conventional flush toilet/septic tank system are the composting toilet and the incinerating toilet. Both are well-suited to locations where the soil is not permeable enough for traditional drain fields, as well as areas where water is scarce.

What is a drainage mound?

Mound Soakaways. Mound soakaways are normally only used when soil and drainage conditions prove to be unsuitable for other forms of effluent dispersal. As the name suggests mound soakaways are built above the natural soil surface.

How does a mound septic work?

The mound is a drainfield that is raised above the natural soil surface in a specific sand fill material. Within the sand fill is a gravel-filled bed with a network of small diameter pipes. Septic tank effluent is pumped through the pipes in controlled doses to insure uniform distribution throughout the bed.

How do you build a leach field?

How to Make a Leach Field
  1. Locate your septic tank and uncover the distribution box.
  2. Decide where to dig your trenches.
  3. Clearly mark the trenches with spray paint.
  4. Dig the trenches.
  5. Lay straight perforated pipes in the trenches.
  6. Cover the trenches with a layer of straw.
  7. Plant grass over the top of the leach field.

Can a mound system freeze?

Freezing temperatures can cause various components of your septic system to freeze up. The most vulnerable areas of your septic system are the pipes leading from the house into the septic tank. Septic systems that are used frequently are less susceptible to freezing because of the constant flowing water.

Can you walk on a septic mound?

Besides the obvious risk of contaminating the produce with bacteria, common management practices such as rototilling can damage the mound. Low-maintenance perennial plants that minimize the need to walk on the mound are ideal. Walking compacts the soil and may interfere with the evaporation of effluents.

How often do you pump a mound system?

The raised mound that was initially installed in your home was only for two people. It was supposed to be pumped out every three years. But you had children and that meant that your household got bigger. With 5 members, it should‘ve been pumped every 2 years.

Can you have a garbage disposal with a mound system?

Yes, garbage disposals are convenient. You see, your septic system is designed to break down human waste and filter clean, waste-less water into your drain field or sand mound.

How much does it cost to install an alternative septic system?

An alternative or aerobic septic system typically costs between $10,500 to $15,000 on average, whereas a conventional or anaerobic system ranges from $2,500 to $5,000 with most homeowners paying $3,500 on average.

How much does it cost to put in a well?

Drilling a well costs $5,500 for an average depth of 150 feet. Most projects range between $1,500 and $12,000. Expect to pay between $15 and $30 per foot of depth, or up to $50 for difficult terrain. Digging might be enough for shallow depths, ranging between $10 and $25 per square foot.

Why is it called a turkey mound?

Most homes in the Poconos have on-lot septic systems, referred to by many as turkey mounds. “The term turkey mounds actually started in Hemlock Farms because the turkeys liked to sit on top of the mounds and eat,” said Fox.

What force moves wastewater through this system?

The wastewater system relies on the force of gravity to move sewage from your home to the treatment plant. So wastewater-treatment plants are located on low ground, often near a river into which treated water can be released.

How do you install a mound system?

How to Install a Sand Mound Septic System
  1. Install the two tanks.
  2. Dig a trench from the house drain to the inlet side of the septic tank.
  3. Install 4 inch PVC pipe from the house to the septic tank.
  4. Plumb in the submersible pump inside the holding tank.
  5. Create a mound of sand over the tilled mound area.

What is above ground septic?

Aboveground systems, referred to as mound systems, were developed to compensate for poor-absorbing local soils that cannot support a standard underground septic system.