Citroen BSI (Body control) failure

Peugeot and Citroen BSI (Body Control) units are very prone to failure. Symptoms include no indicators, ignitions lights on with no key, wildly incorrect cluster readings and complete non start. We can fix these units with a 2 year warranty.

Also, what is a BSI on a car?

BSI stands for Body Systems Interface, and this is essentially the second main ECU that deals with most electrical things inside the car such as the instrument cluster, windows, indicators, wipers, climate control etc.

Subsequently, question is, what's a BSI reset? Before sending the unit try the BSI Reset procedure as this may cure your faults: Put the driver's window down, lift the bonnet and ensure all equipment is switched off. Ensure all doors are closed and remove key from the ignition. Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds.

In this manner, what does the BSI control?

The BSI unit is basically a computer which. handles a multitude of functions such as. odometer value, central locking, lights and. immobiliser.

How do you reset the ECU on a Citroen c4?

firstly turn on the ignition not engine running, open bonnet remove battery positive lead and then turn off ignition. then touch the positive lead to earth,this powers down all ecus and resets erasing intermittent faults in the process. then reconnect the battery lead.

Related Question Answers

What does economy mode mean?

The term “Eco Mode” actually stands for the economical mode in the car. With its button on the left of the steering wheel, its function is to alter the certain features of the car mechanically. It is mainly used while driving so that maximum miles can be covered with a gallon of gas or a liter of fuel.

What does BSI stand for?

body substance isolation

What does economy mode mean on Peugeot 307?

The Peugeot economy mode is a power saving mode designed to stop the battery going dead if the ignition is on when the engine is not running.

What is economy mode on Citroen c4?

The “economy” consumption mode is available only when the alternator is not operating (engine not running) . Economy mode prevents the battery from discharging when the engine is not running . The non-permanent electrical functions are deactivated whatever the position of the ignition key .

What does economy mode mean on Citroen c3?

Economy mode or ‘Eco Mode‘ is activated by the car computer (BSI) to save the battery power when the ignition has been left on and the engine not yet started.

What does economy mode active mean on a Peugeot 206?

Re: Non start – New battery – Economy Mode Active

Eco mode will be active after the ignition has been operated for 30mins without the engine being started. It will go once the engine has been started.

How do I reset my Citroen c4 key?

– Turn key to ignition on, and press and hold locking button for about 5 secs. – Wait about 10-15secs and fob programming should be complete. If this hasn't worked, and the key is a definitely a key that starts the car, then the fob either has worn batteries, or is a faulty fob.

How do you reset the BSI on a Citroen c3?

Ensure all doors are closed and remove key from the ignition. Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds. Reconnect the vehicle battery, wait a further 10 seconds (do not open doors). Switch on the side lights through the driver's window.

How do I reset my BSI?

Process of Rebooting the BSI in a Peugeot:

Make sure all the gadgets are switched off, the driver's window lowered and open the bonnet. Then close all the doors and take the key out of the ignition. Wait for 3 minutes, disconnect a battery terminal and wait for a further 15 seconds.

How do I reset my Peugeot?

You don't need diagnostic interface or to visit Peugeot dealer in order to reset the regular maintenance light (spanner).
  1. Press and hold trip reset button.
  2. Turn the ignition on.
  3. Continue pressing trip reset button while countdown is shown on the odometer display.
  4. When countdown reaches 0, you can release the button.

How do I reset my Peugeot 207?

How To Reset Peugeot 207 Service Indicator Spanner Warning Light
  1. Turn the ignition to the OFF position.
  2. There are 2 buttons on the dash, push the Right one ( button)
  3. Turn the ignition to ON position without starting the engine.
  4. Continue to hold down the button until the end of the countdown and the service light turns off.

How do I reset my central locking on my Peugeot 207?

2 Answers
  1. Insert key into ignition and turn to RUN, not start.
  2. Wait 10 seconds.
  3. Press the lock button for 10 seconds.
  4. Turn the key to OFF.
  5. Remove the key and wait for 10 seconds.
  6. Press the lock button, the dash lights should come on.

How do you reset the ECU on a Peugeot 307?

Put the driver's window down, lift the bonnet and ensure all equipment is switched off. Ensure all doors are closed and remove key from the ignition. Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds. Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.).

How do I get the radio code for my Peugeot Boxer?

The radio code is indicated on many peugeot boxer models on a small white sticker inside the glove box. it will be labeled “Anti-theft radio code“. Enter this code using the preset radio buttons of your peugeot boxer radio. You will hear a beep and then the radio will resume normal functions.

How do you program a Peugeot 206 key?

CENTRAL DOOR LOCK with DEADLOCKING (2 BUTTON PLIP KEY)

Ensure all doors are unlocked using the key. 2. Press and HOLD the large plip key button while the LED flashes continuously for 20 seconds. After 20 seconds press the small deadlock button once while still holding the large button.

What does the BSI control?

BSI stands for Body Systems Interface, and this is essentially the second main ECU that deals with most electrical things inside the car such as the instrument cluster, windows, indicators, wipers, climate control etc. Other things it does is stores the cars mileage and contains a relay to turn on the air conditioning.

What is a shunt fuse in a car?

The Shunt fuse is a fuse that have 2 positions unlike all others: – Position 1, “Park”, when the car is in stock with the dealer parked for long time. – Position 2, “Client”, when the car is delivered to the client (the change of position is done by the technicians in the agency before delivery)

How do you set the clock on a 2006 Citroen c5?

Have the ignition on but radio off. Push in the button to left of the display and hold it in. After 3 or 4 seconds, you will get “Language: English”. Keep pressing the button to scroll through the menus until you get to the time and date.