When you are placing recessed lighting into a ceiling in a basement you need to consider where the light fixture is placed and what the light fixture is near. Because the recessed lighting actually penetrates into the ceiling or wall, it will often be placed near insulation.

Subsequently, one may also ask, how many can lights in a basement?

Basements are dark. Even though it may seem like 5 lights should be plenty, one extra is probably the right answer. Yes, that means another \$25 or so worth of lighting material. Yes, that means one more pot light to wire.

Subsequently, question is, how many can lights for a 12×12 room? The typical rule-of-thumb is 24″ from each wall, and then 3-5 feet between cans. So in a 12′ room you'd probably want two rows of lights. Considering it is a bedroom and you don't need it as bright as a kitchen, you can probably get away with 2 rows of 4 lights for a total of 8.

Accordingly, what is the best lighting for basement?

When it comes to lighting, there are 4 bulb types that are most used in the basement setting: incandescent, fluorescent, light-emitting diodes and halogen. Incandescent bulbs are very popular because they produce a bright, warm light that helps with creating a comfortable, cozy atmosphere.

What size recessed light for basement?

Focus first on general, all-over lighting, which typically is best achieved through recessed ceiling cans as long as the ceiling height is at least 7'6″ or preferably 8′ high—or higher. You'll want to space cans 8′ to 10′ apart in most rooms, depending on size and function.

## How many can lights per square foot in basement?

One common rule of thumb is 1.5x the square footage in incandescent watts, i.e. if you are lighting up all 550 sq feet you will need about 825 equivalent watts, or 14 60 watt fixtures.

## Is recessed lighting outdated?

5 Advantages of Recessed Canister Light Fixtures

But recessed light fixtures usually are not very visible, making them a good choice where you want the light itself to be the design element, not the fixture hardware. The reason recessed lights never go out of style is that they have never really been in style.

## How many can lights in a 20×20 room?

If you have a center light fixture, you should be able to use the 4 4″ line voltage cans or low voltage for supplemental lighting. for a 20 foot room i would go with at least 8 three inch cans.

## How many can lights on one switch?

The main limitation to the number of recessed fixtures you can run at the same time is the rating of the circuit breaker that controls the circuit. Each fixture with a 60-watt incandescent or halogen bulb draws about 1/2 amp, so a 15-amp breaker for a standard lighting circuit would be able to handle 30 of them.

## How far apart do you put LED downlights?

Spacing. Recessed downlights are generally positioned 1.5 to 2 ft. away from walls with a space of 3 to 4 feet between each light. Dividing the ceiling height by two is a way of gauging how much space to leave between each downlight. Thus, if your ceiling is 8 foot high, place your lights 4 feet apart.

## How do I choose under cabinet lighting?

For best results, choose a finish that closely resembles your cabinets. To ensure even lighting across the counter, use light bars that closely match the width of your cabinets. If you're using puck lights instead, place them 8-12″ apart for even light distribution, or space them out further to create pockets of light.

## Should recessed lights be wired in series or parallel?

Your recessed lighting should not be wired this way, as it causes a drop in amperage to the light farthest from the circuit breaker in the series, and if one fixture fails, the others fail, similar to how when one light burns out in a strand of Christmas lights, they all fail.

## How do you can daisy chain recessed lights?

In the attic, run a wire from over the switch location to the first six-inch light, then to the next and so on until all six-inch lights are daisychained to the switch location. Daisy chain the two small lights back to the same location using a separate set of wires.

## How do I install multiple lights on one switch?

You can do this light switch wiring in one of two ways. The most common is to daisy-chain the light fixtures by connecting them to each other and hooking the first one up to the switch. The other way to wire multiple lights to one switch is to connect all of them directly to the switch in a “home run” configuration.

## Can I install recessed lighting myself?

Installing recessed fixtures yourself is not too difficult of an undertaking. It is the easiest if you have dropped ceilings or access from above (from the attic, for example). If there is not an electrical outlet handy, you may want to hire an electrician to run wire to the new fixture.

## How do you install a ceiling light without an existing wire?

Hold a ceiling electrical box against the ceiling where you will install the fixture and trace the outline of the box. Cut a hole into the ceiling with a drywall saw. Place an old-work electrical box against the wall, between two studs, where you want to install the light switch.

## How do you run wire for recessed lighting?

Wiring recessed lighting: Remove the old box

Drop a weighted string down through the hole in the top plate and tape the end of the cable to it. Pull the cable up and route it over to the switch hole. Whether you choose a switch or outlet to provide power, replace the existing electrical box with a new one.

## How can I decorate my basement bedroom?

Easy Tips To Help Create The Perfect Basement Bedroom
1. Keeping Away the Chills. The most basic requirement for turning the basement into a beautiful bedroom is getting the insulation right.
4. Warm and Cozy Colors.
5. Ceilings and Floors.
6. A Staircase to Drool Over!
7. Drive away Darkness.

## How many recessed lights do I need for a 10×10 room?

The typical rule-of-thumb is 24″ from each wall, and then 3-5 feet between cans. So in a 12′ room you'd probably want two rows of lights. Considering it is a bedroom and you don't need it as bright as a kitchen, you can probably get away with 2 rows of 4 lights for a total of 8.

## How many LED recessed lights per room?

A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination. This is an important rule to keep in mind when you are going to rely exclusively on recessed ceiling lights to illuminate your kitchen.

## Should I use 4 or 6 recessed lights?

Size and Layering

Size recommendations say to place 4-inch lamps 4 feet apart and 6-inch lamps 6 feet apart. However, these are general guidelines. Smaller task or accent lighting using 2-inch or 3-inch lamps can work in conjunction with well-placed general recessed lighting.

## How far to space can lights in basement?

For four inch lights, it is recommended that you space your light fixtures at about four feet apart. Accordingly, you would place six inch lights about six feet apart.

## What size recessed light basement?

Focus first on general, all-over lighting, which typically is best achieved through recessed ceiling cans as long as the ceiling height is at least 7'6″ or preferably 8′ high—or higher. You'll want to space cans 8′ to 10′ apart in most rooms, depending on size and function.