Like most late model vehicles, this 2012 Chevrolet Malibu key has a circuit, chip hidden inside the head of the key. Most of us are not aware of the fact because the chip is not visible and molded inside of the black plastic head.

Also know, how much is a replacement key for a Chevy Malibu?

A: Replacing a Chevrolet Malibu key can cost anywhere between $90-$400.

One may also ask, how much does a Chevrolet replacement key cost? You can order a new key from any Chevy dealer or locksmith. The average cost for a new Chevrolet key is between $60 and $120. The price can vary depending on if your Chevy has a transponder key, security chip or VATS. If your Chevy is 2006 and newer it may also need to be programmed.

Herein, does a 2002 Chevy Malibu have a chip in the key?

Chevrolet Malibu metal key blade If your Chevrolet Malibu was made in the years 1997, 1998, 1999, 2000, 2001, 2002, 2003 or 2004, your vehicle have no chip in the key. If you have lost all keys and you do not have a spare key, there are two options for a new Chevrolet Malibu key.

Can you get replacement key fobs?

“The cost to replace the latest key fobs can run anywhere from $50 to as high as $400 depending on the brand,” says Consumer Reports automotive analyst Mel Yu. And that's just for the fob. Add another $50 to $100 to get replacement fobs programmed to work with your car and to have a new mechanical backup key made.

Related Question Answers

Can you get a key made for a car with the VIN number?

As long as you can prove ownership of your vehicle a car key can be made with the Vehicle Identification Number aka VIN number. Once a key code is pulled from the VIN number a car key can be cut. However most vehicles keys also have transponders in them and most be programmed to the car.

How much does a locksmith charge to program a key fob?

Well that depends on several factors. The cost of car key programming can vary depending on the year make and model of your vehicle and whether you take it to the dealership or your local automotive locksmith. Car key programming ranges at the low end of $50 to as high as $500.

Can a locksmith make a key without the original?

You can still acquire a replacement key if you have lost the original. An experienced locksmith will be able to make a replacement key for you even if you do not have the original. When you contact a locksmith, you will need to supply some information to the company before your key can be replaced.

How much does it cost for a locksmith to make a car key?

Locksmiths typically charge $1.50-$4 to copy a standard key, but they may charge $3-$20 or more for specialized keys, and it can be $50-$175 for vehicle keys with an electronic or transponder chip.

Can AAA replace lost car keys?

No Keys, No Problem. AAA members tow your car for free to any Keyless Shop location. We can also come to you for an additional $100. For AAA members, If all keys are lost we recommend getting AAA to tow your car to any our locations and we can make the key, this is the most affordable way.

Does Geico insurance cover key replacement?

Coverage is limited to $100 total for cost of labor and supplies for the following services: key breaks in the ignition, broken key in the door or trunk, lost keys, or keys locked in the car.

How do you program a key fob?

Key Fob Reprogramming in General
  1. Replace the batteries inside the key fobs.
  2. Get Inside the Car.
  3. Turn on the Ignition.
  4. Press the Lock Button on Remote.
  5. Listen for a Lock Sound.
  6. Programming Additional Remotes.
  7. Turn Off the Ignition.
  8. Step out from your car and test the result.

How do I reprogram my car remote?

How to Program a Car Remote
  1. Sit in the car with all of the doors and the trunk completely closed.
  2. Turn the key to the “Off” position until the lights on the dashboard go off.
  3. Press the “Lock” button within five seconds of entering programming mode and hold the button for one second before releasing it.

How do you program a Chevy key fob?

How to Program GM Key Fobs
  1. Enter your GM vehicle with your keyless remote and your ignition key in hand.
  2. Insert your key into the ignition and press and hold the “Unlock” tab on your driver's side door.
  3. Turn the key in the ignition to “On” and then back to “Off” two times in quick succession.

How do you program a key fob for a 2015 Chevy Malibu?

2015 Chevrolet Malibu Key Programming
  1. Insert the original, already programmed key in the ignition and start the engine.
  2. After the engine has started, turn the key to off and remove the key.
  3. Insert the key to be programmed and turn it to on within 10 seconds of removing the original key.
  4. The security light will turn off once the key has been programmed.

How do you program a 2013 Chevy Malibu key fob?

The vehicle must be off and all of the keys you wish to program must be with you.
  1. Insert the new vehicle key into the ignition.
  2. Turn to ON/RUN. The security light will come on.
  3. Wait 10 minutes until the security light turns off.
  4. Turn the ignition to LOCK/OFF.
  5. Repeat Steps 2–4 two more times.

How do you remote start a 2011 Chevy Malibu?

A Guide to Using Your Chevy Malibu's Remote Start Feature
  1. Lock your car.
  2. Press and hold the remote start button until you see the signal lamps flash (it should take about 4 seconds).
  3. Once you're ready to go, enter your car as normal and turn the key.

How do you program a 2018 Malibu key fob?

Key Pairing : Instructions

Insert a emergency key into the driver's door lock or any outside key barrel some vehicles you have to use the truck lock !!!. Within 5 seconds turn the key to the UNLOCK position ONLY 5 times. Place the new UNprogrammed key in the programming slot. Now you have a new programed key.

How do transponder keys work?

Transponder keys provide an extra security to your car. They contain a very small computer chip inside them which is used to authenticate the original car key and the duplicated car key. When you plug it into the ignition, the Engine Control Unit (ECU) will send a coded message to the key.

How do you program a key fob for a 2002 Chevy Malibu?

How to Program the Keyless Entry Remote to a 2002 Chevy Tahoe
  1. Sit in the driver's seat and close the door.
  2. Put the key in the ignition.
  3. Push and hold the “Unlock” button on the driver's side door.
  4. Turn the key to the “On” position and then back to the “Off” position.
  5. Let go of the “Unlock” button.

How much is a key for a 2014 Chevy Malibu?

2014 Chevrolet Malibu Remote Keyless Entry Key Fob 5912543 5921872.

How much does a Chevy Malibu key cost?

A: Replacing a Chevrolet Malibu key can cost anywhere between $90-$400. The actual price depends on a number of factors: The type of key need. The car's year of manufacture.

Does a 2006 Chevy Malibu have a chip in the key?

Like most late model vehicles, this 2006 Chevrolet Malibu key has a circuit, chip hidden inside the head of the key.

Does a 2004 Malibu have a chip in the key?

Like most late model vehicles, this 2004 Chevrolet Malibu key has a circuit, chip hidden inside the head of the key.