Does Dewalt dws779 have a laser?

The XPS work light cut-line technology for the Dewalt DWS779 miter saw is vastly preferred by woodworking professionals over older laser light options offered on lesser miter saws. The LED light is positioned directly above the miter saw blade and casts a shadow of the blade kerf directly onto the piece being cut.

The DeWALT DWS779 is now discontinued and selling at a reduced price. It was replaced by the DWS780 which is the updated model with some additional features. Unlike the DWS780, the DWS779 does not have the XPS light that indicates the cut line on the workpiece.

The DeWalt DWS780 has a stainless-steel detent plate with a cam lock. … On the other hand, the DeWalt DWS779 has a double horizontal rail with an excellent clamping system. It works rather well and features a linear ball bearing, which makes cutting more accurate.

A: There is no laser system. For $200.00 more, the DWS780 has an LED that projects a straight line shadow onto the material you are cutting.. This is the same exact saw minus the LED light.

The XPS work light cut-line technology for the Dewalt DWS779 miter saw is vastly preferred by woodworking professionals over older laser light options offered on lesser miter saws. The LED light is positioned directly above the miter saw blade and casts a shadow of the blade kerf directly onto the piece being cut.

Essentially XPS technology uses an LED to project light down either side of the blade, creating a shadow of the blade in the work area. As the blade lowers, the shadow sharpens, darkens and shows exactly how wide the cut will be once it’s made.

Inside the big yellow box, you’ll find everything you need to put the DeWalt DWS779 to work. A 12”, carbide-tipped 32-tooth blade comes pre-installed on the saw. It’s a decent-quality blade, and it’s fine for general construction.

If you have multiple bevel cuts to make, then a double bevel miter saw is absolutely worth it.

The saw features a Cutline Blade Positioning System where a light on the blade creates a shadow indicating exactly where the cut will be made on the workpiece.

1. DEWALT Miter Saw DWS780 – Best overall. Check Latest Price. Our favorite DeWalt miter saw is the DeWALT DWS780. …
2. DEWALT Mitre Saw DW715 – Best for the Money. Check Latest Price. …
3. DEWALT Miter Saw DCS361B. Check Latest Price.

If you’ve seen those laser cutting guides on miter saws and wonder if you can add one to your old saw, take heart. It’s possible, and not terribly expensive. The guide fits alongside the blade, replacing the outer washer.

How The XPS Shadow Line Works. … There are two led lights that shine onto either side of the blade of the saw which creates a shadow on the cutting surface so you can see exactly where the blade will cut. Not only will it show you the line that the blade will cut it will also show you thickness or kerf of the blade.

All a shadow line is, is an extension of the blade that shows up on the piece to be cut without having to power the blade all the way down to the piece. Works best when you bring the blade down to about an inch above, leaving a darker line that exactly matches where the blade will go.

First, the light: DeWalt’s XPS Crosscut Positioning System utilizes bright LEDs that are projected on both sides of the blade. This illuminates the work-piece while simultaneously creating a shadow line you can cut to. It’s brilliant. Every saw should have one.

Yes, DWS779 will include blade #DW3126.

A basic compound miter saw starts at $100, while miter saws with sliding blades start at $125. Dual-bevel miter saws start at $200, and professional-level miter saws with special features can cost as much as $800.

This item DEWALT 12-Inch Sliding Compound Miter Saw, Double Bevel (DWS780) , Black #1 Best SellerDEWALT Miter Saw, Single Bevel, Compound, 10-Inch, 15-Amp (DWS713)Item Dimensions24 x 9 x 48 inches24.8 x 20 x 17.72 inchesPower SourceCorded ElectricAc/dcVoltage120 volts20 volts

Q2: Which is the best type of cutoff saw to use for crosscutting capacity of greater than 12”? A2: A sliding compound miter saw, mounted on rails, provides crosscutting capacity of greater than 12” on some models.

1. Ryobi. EMS190DC 18V ONE+ Mitre Saw.
2. Evolution. R255SMS 240V 255mm Sliding Mitre Saw.
3. Makita. LS0714LN 190mm Slide Compound Mitre Saw 240v.
4. Evolution. FURY6 210 Multi-Purpose Mitre/Table Saw.
5. Draper. Precision Hand Mitre Saw.

A single bevel miter saw only adjusts its positioning in one direction: to the left or right. Therefore, a single bevel miter saw allows you to make one-directional bevel cuts. Single bevel miter saws can make both bevel cuts and miter cuts independently or together.

The bevel ranges max out at 45 to 48 degrees. Performance and Cutting Capacity. … No saw could cut through a 4×4 at a 45-degree bevel angle, nor could any cross-cut a 6×6.

Dewalt has come out with a new 12″ dual bevel compound miter saw, DWS716XPS. … Upon seeing this saw being described as discontinued, I reached out to Dewalt, asking for more information about the product update and changes.

In a nutshell, the XPS module projects LED light along both sides of the blade, forming a shadow of the blade on the workpiece. As the saw blade is lowered towards the workpiece, the width of the shadow sharpens, darkens, and closely matches the thickness of the saw blade’s kerf.

• DeWalt DWS780 Corded Miter Saw.
• DeWalt DWS715 Corded Miter Saw.
• DeWalt DCS361B Cordless Miter Saw.

Where Are The DeWalt Manufacturing Facilities In The United States? DeWalt currently has manufacturing plants in Maryland, North Carolina, South Carolina, Tennessee, Kentucky, and Connecticut.

Miter saws with laser beams have been utilized to mark perfect blade paths across a wide range of wood types. This is a premium feature as not all saw has it. The lasers work reasonably well to enable you to make more accurate cuts using your miter saw.