How do I choose PVC cement?

PVC cement is a chemical solvent. PVC cement is specially formulated for schedules 40 and 80 PVC pipe. ABS cement is chemically engineered to react with the chemical structure of the pipe. A special type of cement called a transitional cement can be used when multiple types of PVC pipe, such as ABS and PVC, are joined.

Each type of solvent cement is colour coded (for easy identification) in accordance with AS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings. Green is for pressure applications and blue is for non-pressure applications.

Oatey® PVC Rain-R-Shine Medium Bodied Fast Set Blue Cement is recommended for pool and spa, irrigation, potable water, pressure pipe and DWV applications. It is formulated for wet conditions and quick pressurization, and is easy to apply with included in-lid dauber.

White (water) PVC is pressure rated and gray (Electrical) PVC is not. White PVC is softer than Gray so it bends easier. Gray uses the single step clear PVC cement won’t leave blue or read stains as many times it’s in the open and can be seen.

The Best Way to Joint PVC and ABS Plastic Pipe If you’re plumbing in a new drain or vent and have to join two different kinds of plastic pipe, black ABS and white PVC, don’t assume that you can simply glue them together. Most plumbing codes don’t allow ABS pipe to be solvent-welded (glued) to PVC.

Medium Clear PVC Cement: Fast drying and suitable for potable water, pressure pipe, conduit and DWV applications. … Hot Medium Blue Lava PVC Cement: Extremely fast setting and the preferred formula for emergency, repair and cut-in work for potable water, sewer and DWV applications.

Some will tell you that primer is not necessary to create strong PVC joints. … While you may be able to create strong joints without it, primer is an important part in making sure your joints are as strong as they possibly can be. We recommend you use primer on any joints that will have liquid media passing through them.

Rain or shine PVC Glue Dry Time and Directions It is rated for very fast setting, and it is a hot cement formulated for wet conditions and quick and rapid pressurization. This cement is best recommended for pools, irrigation, and pressure pipes. No primer is needed.

PVC cement (or glue) does not work like regular glue. … This means old-fashioned PVC cement will not be fully effective on CPVC. There is no special “CPVC to PVC glue,” so chemically joining CPVC and PVC requires solvent cement and primer that are strong enough to fully bond CPVC pipe.

Grey PVC is used as electrical conduit and is better suited for sunlight resistance. The fittings for this type of pipe are made to pull wires into and not intended for containing pressured fluids. White is for plumbing applications. Both use the same solvents and glues.

Medium-bodied gray cement for use on all schedules and classes of PVC pipe and fittings of up to 6″ in diameter with interference fit. Recommended for potable water, pressure pipe, conduit, and DWV.

Oatey® PVC Heavy Duty Medium Set Gray Cement is recommended for DWV, pressure pipe, potable water and electrical applications. Its thick formula fills gaps in large diameter pipe and fitting joints and is easy to apply with included in-lid dauber.

There are two commonly used plastics for drain, waste, and vent pipes inside of homes: ABS (black) and PVC (white, mostly). … For the most part, ABS and PVC are not supposed to be glued together.

Today, there are two commonly used plastics for drain, waste, and vent pipes inside of homes; ABS (black) and PVC (white, mostly).

PVC pipe is more flexible than ABS, while ABS is a bit stronger and can resist a higher shock or impact. Additionally, PVC has an advantage in that it’s better at muffling the sound of water as it flows through the pipework.

To explain, you need to understand the difference between PVC and CPVC. PVC stands for polyvinyl chloride, while CPVC stands for chlorinated polyvinyl chloride. … So, if all you have to bond two PVC pipes and fittings together is CPVC cement, it will work, but PVC cement cannot be used to bond CPVC pipes and fittings.

What are the differences between CPVC and PVC? The main difference between CPVC and PVC is the range of temperatures each is capable of withstanding. CPVC can handle temperatures up to 200° Fahrenheit, while PVC peaks at 140° Fahrenheit.

Oatey® PVC Medium Gray Fast Set Cement is recommended for DWV, pressure pipe, potable water and electrical applications.

2 Answers. No – PVC Primer does not need to ‘dry’ before use – in fact, it needs to be wet to do it’s job and not impede the cement – remember, plumbers in a hurry use this daily and aren’t sitting around waiting for the primer to dry before grabbing the cement.

Weight:0 LBSize:4 oz.

The short answer: while not all applications require PVC primer, using one will definitely help ensure your pipe joints are sturdy and leak-free. Major building authorities in Australia all agree that PVC primer (also known as priming fluid) should be used when joining PVC pipes with solvent cement.

A: Yes. CPVC solvent cement technically will work on PVC piping. However, we recommend that the correct Weld-On primer and PVC solvent cement for the particular application should be used. Please note that PVC solvent cement, because of temperature limitations, is not recommended for CPVC piping.

Oatey® CPVC Medium Bodied Fast Set Orange Cement is recommended for cold water systems and hot water systems up to 200°F / 93°C. It is approved for Corzan® CPVC piping systems.

Allow 15 minutes for good handling strength and 2 hours cure time at temperatures above 60 degrees Fahrenheit before pressure testing up to 180 psi. Longer cure times may be required at temperatures below 60 degrees Fahrenheit or with pipe above 3 inches.

Blue Monster® PVC Cement Blue Monster 1-Step PVC cement is a self-priming PVC pipe glue that requires no additional primer. … Typical uses include potable water, pressure pipe, pool, irrigation, conduit, DWV, drain duct and sewer.

ProductShelf Life (from date of manufacture)PVC Cements, Primers, and Cleaners3 yearsABS Cements and Cleaners3 yearsCPVC Cements2 years

When working with CPVC piping, use multipurpose PVC/CPVC glue or a CPVC glue; glue made specifically for PVC will not hold properly on CPVC and could lead to leaks or breakage. CPVC pipes can withstand hot water temperatures up to 180 degrees F.

No. CPVC is measured by O.D., which makes its sizing similar to hard copper. PVC is measured by I.D., which makes its sizing similar to iron pipe.

As mentioned earlier, both schedule 80 and schedule 40 PVC pipe have the exact same outside diameter. This is possible because schedule 80’s extra wall thickness is on the inside of the pipe. … This means schedule 40 and 80 pipe do fit together and can be used together if necessary.

Red Hot Blue Glue® is ideal for both quick pressurization and demanding conditions (wet or cold weather). Red Hot Blue Glue® does not require the use of a primer, unless specified by local code. APPLICATIONS Red Hot Blue Glue® is for use on rigid and flexible PVC plastic pipe and fittings.

DO allow enough cure time. After holding the pipe in place for 30 seconds, give it at least 20 minutes before handling it further so the cement can set properly. Refer to the product’s instructions for how long the glue needs to cure before you can use it for your project, usually within 24 hours.

Schedule 80 pipe is designed with a thicker wall. This means the pipe is thicker and stronger, and as a result it can handle higher pressures. … Schedule 40 PVC pipe is strong, rigid, and can handle pressure applications. For jobs that require a higher pressurization though, schedule 80 pipe is better suited.

The most noticeable difference between regular PVC and electrical PVC is the color of the pipes. PVC pipe that is used for plumbing is usually white while electrical conduit PVC is usually gray.

In fact, PVC and CPVC look so similar that manufacturers use different colors to tell them apart. The CPVC pipe and fittings used in fire sprinkler systems is orange.

Allow 15 minutes for good handling strength and 2 hours cure time at temperatures above 60°F before pressure testing up to 180 psi. Longer cure times may be required at temperatures below 60°F or with pipe above 3″.

This electrical PVC cement does not require a primer unlike the solvent weld PVC cement that is used for plumbing to glue PVC waste, drain and vent pipes and their associated PVC fittings.