Restart from Device Settings
  1. Using the remote, press the xfinity button.
  2. Use the left arrow or right arrow button to highlight Settings (the gear icon).
  3. Use the down arrow button to highlight Device Settings.
  4. Use the down arrow button to highlight Power Preferences.
  5. Use the down arrow button to highlight Restart.

Also to know is, how do I reset my cable box?

To reset your cable box, simply unplug it from the wall outlet. Wait about 30 seconds, then plug it back in and allow the box to go through the reboot process, which should take about three minutes. If you can't reach your power cord, reset your cable box this way: Turn the cable box power on.

Also, why do I have to keep resetting my cable box? Rebooting may also result from of a loss of signal fidelity. When signals become weakened, cable boxes will automatically restart as an attempt to obtain a stronger signal. If a box restarts after displaying choppy, pixelated or disjointed images, this is a likely cause.

Subsequently, one may also ask, how do I fix my Comcast cable box?

Try these tips.

  1. Check the power on your devices. Make sure your X1 TV box is turned on.
  2. Check the connection of your cables. The video cables between your TV and X1 TV box should be firmly connected.
  3. Try powering down your TV and X1 TV box.

How do I know if my cable box is bad?

The channel might not change, the image might be frozen, the playback features may not work, and so on.

  1. Step 1 – check for power. The first thing you have to do is to check if the television and the box are receiving power.
  2. Step 2 – Check if the TV is working.
  3. Step 3 – Check the connections.
  4. Step 4 – Reboot the cable box.

Related Question Answers

Why is my cable not working?

First turn off the power on the TV and unplug it. Then pull out the HDMI cable from either the box or the TV (doesn't matter which). Plug the TV back in and turn it back on. Finally, plug the HDMI back into HDMI 1 and make sure the TV is on the HDMI 1 input channel.

How do I reset my Comcast remote control?

To perform a factory reset:
  1. Press the Setup button until the LED at the top of the remote changes from red to green.
  2. Press 9-8-1.
  3. The LED will blink green twice to indicate that the remote was reset.

How do I factory reset my Comcast DTA?

Here's a step by step guide to resetting your FPB DTA.
  1. Push MENU on the remote.
  2. Arrow down until option 3 “setting” is highlighted – DO NOT PRESS OK.
  3. Enter 6980 on the remote.
  4. Arrow down to Option 3 “Reset Factory Defaults”.
  5. Press “OK” on the remote.
  6. Press “OK” at the “Reset Type All” screen.

Why is my Xfinity box blinking green?

The blinking green light on the DTA means it has not been activated, or activation has failed. Call Comcast support for assistance, they will help you get it activated.

Why is Xfinity On Demand not working?

Re: On Demand is not working

Normally for something like that, you'd need to power cycle the box. You can unplug the power cord from the back of the box for a few seconds and then plug it back in. With Legacy equipment, the On Demand platform will take about 30 minutes to re-download.

What do you do when your cable box wont turn on?

Restart Your Cable Box
  1. Disconnect the power from your cable box by either unplugging the power cord from the wall outlet or from the back of the box.
  2. Wait 30 seconds.
  3. Reconnect the power cable to your cable box or outlet.
  4. Wait 3 – 5 minutes for the box to reset.
  5. Turn on your TV and cable box.

How do I update my Xfinity x1 box?

Replacing Your TV Boxes and Modems – FAQs
  1. Go to xfinity.com/equipmentupdate and follow the on-screen prompts to order new equipment.
  2. Call us at 1-800-xfinity to place an order, ask questions or schedule a professional installation.
  3. For TV Boxes, just use your own TV!
  4. Visit us to exchange your existing equipment at an Xfinity Store or Comcast Service Center.

Why is my cable box saying no data available?

If your cable box states “No Data Available” on your program guide, disconnect the power from the box for about 30 seconds. Plug the box back up and wait for the time to appear on the front of the box before turning the power to the box back on. This should refresh the program guide data to the box.

What does CUC mean on the cable box?

Thanks. For those interested, below are the box codes. CUC —> dAL —> Clock (actual time) —> ERR —> B240 —> P120. TV Messages: Please wait we are preparing the service for you.

How do I reset my TV?

Hold down the menu button on the top or side of your TV for at least 10-15 seconds. An on screen menu will appear asking you to enter the time, date and location settings. Follow the onscreen instrucitons, and once completed your TV will reset to factory settings.

Where is the reset button on Spectrum box?

Using the Manual Reset Button. Locate the Reset button on the front or back of your cable box. Check along the front side of your cable box for a small circular button labeled Reset. If you don't see the button on the front side of your cable box, then check on the back panel near the power cords.

How do you fix my TV when it says no signal?

UNPLUG THE CABLE GOING FROM THE TV TO YOUR CABLE OR SAT BOX

-Remove the HDMI cable or other cables from your Cable TV or SAT set top box. -Keep the cable unplugged for 2 to 3 minutes. -Plug the HDMI cable or other cables back in. -Give it some time for the Cable or SAT box to get the signal and initialize.

How do I reboot my LG TV?

Press the Home button on your remote, and select the cog icon in the top-right corner of your screen to open the Settings menu. Next, head to General = Resets to Initial Settings. Follow the on-screen instructions to complete the reset.

What does OCAP mean?

OpenCable Application Platform

How do I reboot my Comcast cable box?

Restart Using the Power Button
  1. Ensure your cables are tightly secured.
  2. Press and hold the Power button located on the front of the TV Box for 10 seconds.
  3. The TV Box should automatically restart.

How do I tighten my cable connection?

Tighten Your Connections

First, locate the connection between the cable and the wall, and twist it to the right as far as it will go. A good rule to go by is “finger-tight.” Make it as tight as you can without the help of a wrench or tool. Next, find the point where the cable connects to the back of your equipment.

How do you reset a Comcast cable box?

To Reboot Your TV Boxes:
  1. Ensure your cables are tightly secured.
  2. Press and hold the Power button located on the front of the primary DVR TV Box for 10 seconds.
  3. The TV Box should automatically reboot. Or:

Why is my Comcast cable box blinking blue?

On the screen go to “Xfinity / Settings / Device settings / Power preferences / Power saver” (turn it on). After the TV is turned off, the cable box will turn itself off after a while, and will stay off until the TV is turned on again. After the first cycle, the blue light stays solid, no more flashing.

Why does Comcast update every day?

If you're an Xfinity X1 customer, your TV Boxes will automatically reboot once per day to ensure that you have all of the latest software. This reboot, also known as Daily Update Time, happens by default between 3:00 AM and 4:00 AM local time.