Press and hold the On/Off button of the speaker for about 6 seconds until the red LED and blue LED are flashing alternatively, now the speaker is ready for pairing. 2. Turn on your mobile phone and activate the bluetooth function.

Consequently, how do I turn up the volume on my Lynx speaker?

Activate Bluetooth on your compatible device and the speaker will connect automatically to the compatible device and you will hear the `Beep` sound. and press shortly the ` ` button to play the previous track. volume and hold down the` ` button to decrease the volume. call, press on the speaker to pick up the call.

Similarly, how do I turn on the shower speaker? To turn it ON, press the power button for about 3-6 seconds. You will then hear a beeping sound and see an alternating BLUE LED indicator that will tell you that the device is ready for pairing. That's it! To turn it OFF, press the power button for another 3-6 seconds.

Similarly, you may ask, how do I use my Bluetooth ax speaker?

  1. Place the Bluetooth™ device within 1 m (3.3 feet) of the speaker.
  2. Speaker: Turn on the speaker. The blue indicator flashes fast when the speaker enters pairing mode.
  3. Bluetooth™ device: Search for available Bluetooth™ devices and select “SRS-BTV5”.
  4. Bluetooth™ device: Connect to the speaker.

How do I connect to accelerate speakers?

  1. Place the Bluetooth™ device within 1 m (3.3 feet) of the speaker.
  2. Speaker: Turn on the speaker. The blue indicator flashes fast when the speaker enters pairing mode.
  3. Bluetooth™ device: Search for available Bluetooth™ devices and select “SRS-BTV5”.
  4. Bluetooth™ device: Connect to the speaker.

Related Question Answers

Is Lynx speaker waterproof?

The speaker is water resistant to use in the shower.

How do I connect my phone to my Lynx shower speaker?

Activate the Bluetooth speaker's pairing mode by, when in power off mode, press and hold the on/off button for about 6 seconds until the red LED and blue LED are flashing alternatively. Now the speaker is ready for pairing. DC5v 1. Turn on your mobile phone and activate the Bluetooth function.

Where does the shower speaker go?

You can place it either on the wall of the bathroom or in a shower cubicle. Some shower speakers replace shower heads. Shower speakers with adhesive on the back can be fixed on cubicle glass.

Is the AXE speaker waterproof?

Fully water resistant, the SplashBeats Plum Axe Bluetooth Speaker is your go-to shower accessory.

How do I connect my android to a Bluetooth speaker?

Steps
  1. Turn on your Bluetooth speaker and put it in pairing mode.
  2. Swipe down from the top with two fingers on your Android device.
  3. Tap and Hold the Bluetooth.
  4. Tap + Pair new device.
  5. Tap the name of your Bluetooth speaker in the Bluetooth Settings menu.

How do I connect my Bluetooth speaker to my phone?

How to connect Bluetooth speakers to your mobile
  1. Go to settings.
  2. Tap the Bluetooth option.
  3. Turn on Bluetooth.
  4. A list of available devices will appear.
  5. If your speaker is not listed, press the button on your speaker that makes it discoverable – it's often a button with a Bluetooth symbol on it.

How do I connect an Aquasound speaker?

1) Make sure the Aqua Audio device is off. Activate the Bluetooth pairing mode by pressing and holding the q for about 6 seconds until the red LED and blue LED are flashing. The speaker is now ready for pairing. 2) Turn on your mobile phone or other Bluetooth capable device and activate the Bluetooth function.

How do I connect my iPhone to a Bluetooth speaker?

Steps
  1. Place your Bluetooth speaker near your iPhone.
  2. Turn on the speaker and invoke “pairing” mode.
  3. Open your iPhone's Settings.
  4. Tap Bluetooth.
  5. Slide “Bluetooth” right to the “On” position.
  6. Tap your speaker's name.
  7. Play audio on your Bluetooth speaker.

How do I reset my Aquasound shower speaker?

A: Check the unit to ensure it is connected to power and that all wiring is correct. Check to see that the blue/red LED light found on the outer ring of the speaker is flashing. Press and hold the RESET button for 5 seconds. This will reboot and reset your Bluetooth Ceiling Speaker.

How do I reset my Sylvania Bluetooth speaker?

To remove all paired devices from the speaker, press and hold the Bluetooth button and the power button simultaneously for more than 3 seconds. This resets the speaker to factory settings and the speaker will be in pairing mode when you switch it on.

How do I pair my c6 Bluetooth speaker?

Search for the Bluetooth devices and select “C6” from the list. 4. Click it and pair the speaker with your Smartphone.

How do I pair my TaoTronics Bluetooth Shower Speaker?

Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Choose the “TaoTronics TT-SK09” device from the list. Has the pairing been successful, the speaker's LED will stay solid blue and you will hear an acoustic signal.