Stand over the monitor, with your feet on top of either side of the circular base, firmly grasp the bottom edge of the monitor with both hands. Pull upwards at a slight angle, along the tilt line of monitor. The monitor should release from the circular base and stem easily.

Similarly, how do I remove the stand from my Samsung monitor sf350?

Remove Stand Hinge from SF350 There is circuitry where the power button is located and at the top of the monitor for the backlight. Disconnect the monitor from all cables, remove the stand base and stand stem from the monitor if it's still attached, and remove your VESA mount hardware from the back of the monitor.

Also, how do I take the stand off my monitor? Here's how: Remove all the cables, and leave the circular base attached. Set the monitor on the floor, tilt the monitor face back as far as it will go. Stand over the monitor, with your feet on top of either side of the circular base, firmly grasp the bottom edge of the monitor with both hands.

Correspondingly, how do you take apart a Samsung monitor?

  1. Disconnect the power cable and any peripherals connected to the monitor.
  2. Disconnect the stand from the monitor.
  3. Remove all case screws fastening the back panel to the front panel.
  4. Use your flat-head screwdriver to pry up the tabs on the shield lamp.
  5. Lift the shield away from the panel and disconnect the LVDS cable.

How do I remove the stand from my monitor?

  1. Step 1 Stand. Lay the monitor on a flat surface so that the back is facing up.
  2. Grab the hinge cover with both hands on either side of the stand. Squeeze inwards with your thumbs and fingers and lift up to remove the hinge cover.
  3. Remove the four 12.1 mm Phillips #2 screws that hold the stand to the monitor.

Related Question Answers

How do I remove the arm from my Samsung monitor?

Removing the Samsung LED monitor stand hinge attachment
  1. Disconnect all cables and place the monitor (screen side down) on a blanket on the floor.
  2. Pry the back panel off – place a flat head screwdriver into the small inserts on the bottom of the monitor and slowly pry the back panel off.

How do you put a Samsung monitor stand together?

To install the stand on the monitor:
  1. Place the monitor on a non-scratch surface, such as a towel, with the screen facing down so that you can see the backside of the unit.
  2. Insert the stand to the monitor.
  3. If the stand does not click into the monitor, tap the bottom of the stand with required force.

How do you remove a VESA mount?

To remove and install the VESA mount bracket, do the following:
  1. Remove all media from the drives and turn off all attached devices and the computer.
  2. Place a soft, clean towel or cloth on the desk or surface.
  3. Remove the computer stand.
  4. Remove the computer cover.
  5. Remove the system board shield.

How do you clean the dust out of an LCD screen?

You can clean out the dust on the inside of your LCD TV with a can of compressed air.
  1. Turn off your LCD television set and unplug it from the wall.
  2. Attach the included nozzle to the front of your can of compressed air.
  3. Turn your television around so that you can see the air vents.

How do I fix my monitor screen problems?

Fixing Computer Monitor Display issues – PC Solutions
  1. Attach the monitor to a different computer. If the monitor still doesn't work, replace the monitor's cable.
  2. Unplug your computer from the monitor and power outlet.
  3. Reinstall the video card drivers.
  4. Right-click a blank area of your Desktop.
  5. Determine whether the problem is caused by electrical interference.

How do I clean my Samsung monitor?

Cleaning your Screen
  1. Turn the monitor off.
  2. Wipe your screen once with the microfiber cloth to remove the larger dust and dirt particles.
  3. Apply a little bit of the LCD solution to the microfiber cloth, leaving a good portion of it still dry.
  4. Wipe away any fingerprints or remaining dirt on your screen.