If you want to reset the remote:
- Turn off the ceiling fan using the remote.
- Wait for about 30 seconds before turning the power on.
- Within those seconds, hold down the off button on the fan for about ten seconds.
Keeping this in view, how do I reset my Hunter Fan remote?
Turn the fan power off and back on at the wall switch (or circuit breaker if necessary). Within three minutes of restoring power to the fan, press and hold both the Fan button and the Light button on the handheld remote for at least four seconds.
Furthermore, why is my ceiling fan remote not working? If you are using a remote control, check that the batteries are installed properly and are not dead. Check that the dip switches on the remote and receiver are set to the same frequency. If you're using a wall control, check the power to the breaker from your control and try working your ceiling fan manually.
Also, how do you pair a Hunter ceiling fan remote?
How to Program Hunter Ceiling Fans
- Go to your circuit breaker or fuse box, and turn off the power to the fan you will be programming.
- Turn the fan's remote control over, and remove the battery compartment cover.
- Match the DIP switches inside the remote's battery compartment with the DIP switches on the fan's receiver unit.
How do I reset my Hampton Bay ceiling fan remote?
Reset your remote control. First, turn off the power. Then remove the batteries from the remote and wait 10 seconds. Replace the batteries and turn the power back on.
Related Question Answers
How do you troubleshoot a Hunter ceiling fan?
How to Troubleshoot a Hunter Ceiling Fan
- Turn the house power on.
- Loosen the fan canopy, and check all connections.
- Inspect the plug connection in the switch housing.
- Push motor reversing switch firmly up or down.
- Remove any remaining shipping packaging.
- Check the blade bracket screws, and tighten if needed.
- Check the blade screws, and tighten if needed.
How do I turn my fan on without a remote?
To control a remote-controlled ceiling fan without using the remote, add a pull cord to the pull switch on the motor module. The pull cord can be purchased from a hardware store or garden and patio shop, while the tools needed are already in most households.
Is there a universal remote for ceiling fans?
There are many “universal” ceiling fan remote control kits on the market for overhead fans controlled by pull chains and a singe wall switch. All of them feature on/off and fan speed control. But whether you can use a ceiling fan remote kit depends on the amount of free space inside the fan canopy.
How do you reset a remote light switch?
Turn the lights off, with the lights off please press and hold on to the light switch button for about 5 seconds until you see a blue flashing light in the circle. When you see the flashing blue light, let go off the light switch and then press and hold A, B or C on the remote control once.
Where is the receiver located on a Hunter ceiling fan?
The receiver in the Passport III fan model 23406 is located in the canopy.
Where is the remote receiver in a Hampton Bay ceiling fan?
Where Is The Hampton Bay Ceiling Fan Receiver Location? Receiver Location: If your transmitter has a reverse button, then the receiver will often usually be in the Switch Housing (located between the blades and the light kit).
Where is the DIP switch on a ceiling fan?
The DIP switches for the receiver are located on the flat surface of the receiver. The DIP switches for the transmitter are in the battery compartment. 4-4. Raise the fan and align the slots in the canopy with the hooks on the ceiling plate.
How do I program my Hampton Bay remote?
Setting the code is fairly straightforward. To begin, turn the remote over to the back and press firmly below the arrow on the battery cover. Slide the cover off and install a 9-volt battery into the compartment. Set each slide code switch near the battery into a position of your choice.
What causes a fan to stop spinning?
The motor begins rotating when the on switch activates, causing the attached blades to spin as well. Any moisture within the motor's mechanical parts can corrode the internal bearings. Corroded bearings will eventually seize, causing fan turning failure for both the oscillating feature and blade movement.
Why has my fan stopped working?
When a ceiling fan doesn't work at all, the first thing to do is to make sure it is receiving electrical power from its switch and from your home's circuit breaker or fuse box. If you find one, flip it all the way off, and then back on—this is how you reset a breaker. Then retry the ceiling fan.
How long can a ceiling fan run continuously?
But higher-quality ceiling fans can rotate lazily for 30 years. Aside from the chore of dusting the tops of the fan blades, they need no maintenance.
What happens when a ceiling fan capacitor goes bad?
The capacitor is usually a black box inside the switch housing of the fan. If the case appears burnt or melted in any way, that is also the sign of a bad capacitor and it should be replaced. Keep in mind that there may be other components in the circuit with the defective capacitor.