Fasteners should be driven flush with the panel surface (not countersunk) and into the framing system. Locate fasteners at least 3/8” (9 mm) from the ends and edges of the sheathing. Nails or screws, as listed in the fastener chart, may be used to attach DensGlass Sheathing to framing.

Similarly, what is DensGlass?

Widely recognized by the GOLD color, DensGlass® fiberglass mat gypsum sheathing has an exemplary track record that spans more than 30 years. It is a preferred substrate under brick, stone, stucco, siding and EIFS due to its ability to protect a structure against incidental moisture during and after construction.

Subsequently, question is, can DensGlass be used as structural sheathing? DensGlass Silver sheathing can be used in applications such as under wood shakes or shingles, plywood panel siding or other horizontal siding applications. All siding must be attached through the DensGlass Silver sheathing and into the framing.

Likewise, people ask, how long can DensGlass be exposed?

twelve months

How much does a sheet of DensGlass cost?

Drywall Sheets

Everyday Low Price$19.99
11% Mail-In Rebate Good Through 2/29/20$2.20

Related Question Answers

Is a 5'8 DensGlass fire rated?

Fire Resistance

DensGlass Sheathing is noncombustible as described and tested in accordance with ASTM E136 or CAN/ULC S114. 5/8” (15.9 mm) DensGlass® Fireguard® Sheathing is included in a variety of UL and ULC listings and other designs in the GA-600 Fire Resistance Design Manual.

Can DensGlass get wet?

DensGlass Sheathing is resistant to normal weather conditions, but it is not intended for immersion in water. Cascading roof/floor water should be directed away from the sheathing until appropriate drainage is installed. Avoid any condition that will create moisture in the air and condensation on DensGlass Sheathing.

Is DensGlass a vapor barrier?

Sto VaporSeal™ is an air and vapor barrier. It is a ready-mixed, flexible, waterproof coating which can be used on gypsum, cement or wood based sheathing substrates. Sto VaporSeal over DensGlass panels can be used on vertical above grade walls.

What is the R value of DensGlass?

RValue (ASTM C518): 0.56. 12. Mold Resistance (ASTM D3273): 10, in a test as manufactured.

Can DensGlass be used in a shower?

The densglass is used in place of normal gypsum sheathing and is installed against the exterior framing prior to the tub / shower installation.

What is Denselement?

Proprietary AquaKor Technology formulation integrates the gypsum core and the fiberglass mat to form a hydrophobic, monolithic surface that blocks bulk water but allows vapor to pass through — eliminating the need for a separate WRB-AB.

What is DensGlass made of?

DensGlass® Sheathing is a gypsum panel made of a treated, water-resistant core, surfaced with fiberglass mats and a GOLD colored primer coating.

How thick is DensGlass?

DensGlass Sheathing is available in 1/2” (12.7 mm) thickness and DensGlass® Fireguard® Sheathing is available in 5/8” (15.9 mm) thickness. DensGlass Sheathing is manufactured in a 4′ (1219 mm) width and 8′ (2438 mm), 9′ (2743 mm) and 10′ (3048 mm) lengths. Other lengths are available upon request.

What is DensShield used for?

DensShield® Tile Backer is designed for use as a substrate for tile walls, ceilings, countertops and commercial and residential floor applications in high moisture areas.

Can you plaster over DensGlass?

Apply water-resistive barrier as required by building code or design authority. Stucco systems may be applied over DensGlass Sheathing using paper-backed metal lath. Paper-backed metal lath must be mechanically attached through the DensGlass Sheathing into the steel or wood framing.

What is DensShield?

DensShield is an ideal tile backer board for high moisture areas because. it has a built-in moisture barrier that stops moisture at the surface. This special coating. helps protect the tile installation and wall cavity from moisture intrusion. DensShield.

What is sheathing for?

Sheathing is the board or panel material used in floor, wall and roof assemblies of both residential and commercial construction. The most basic function of sheathing, in any application, is to form a surface onto which other materials can be applied.

Can DensShield be used outside?

DensShield Tile Backer should not be used in commercial saunas, steam rooms, around fireplaces or areas where prolonged exposure to heat exceeds 125° F (52° C). DensShield Tile Backer panels should not be used as a shower pan base. DensShield Tile Backer should not be used for exterior installations.

Can stucco be applied over wood?

Stucco is a building material that is used to provide a textured finish to walls, ceilings, and other surfaces. Stucco can be applied over almost any surface. Applying stucco over your existing wood siding is a great way to cover up wood that is looking old and worn, or simply to give your home a new look.

How do you install stucco over plywood?

Apply two layers of grade D building paper or asphalt felt to the plywood siding. Follow with the three-dimensional drainage mat and two more layers of paper or felt. Secure stucco mesh to your walls and then apply your layers of stucco for a watertight finish.