How to Backfill your Inground Swimming Pool
  1. Step 1: Swimming Pool Backfill Material.
  2. Step 2: Arrange for the Heavy Equipment.
  3. Step 3: Backfill – Tamp – Backfill – Tamp.
  4. Step 4: Final Layer of Gravel.
  5. Step 5: Soak Down the Backfill.
  6. Step 6: One More Backfill Layer.

Also know, what does it mean to backfill a pool?

The simplest way to backfill a pool is to put the dirt that was excavated back into the hole it came out of. The goal of a slurry mixture is to create a backfill that is strong enough to support itself rather than resting against the sides of the pool but can be removed to allow for pool repairs later on.

Additionally, what do you put around a pool? Landscaping Around Your Above Ground Pool

  • Concrete or Pavers. Concrete patios are a dependable and easy to care for option for your poolside.
  • Gravel or Rock. Using gravel or rock is one of the most popular ways when landscaping around your above ground pool.
  • Plants or Trees.
  • Planters.

Also question is, what is the best material to fill in a pool?

Few reasons why gravel is best to set and backfill a pool with.

  • Gravel itself compacts really well, and it is far greater than sand or dirt that may be used in place of it.
  • Gravel is a permeable material, so pretty much what you are doing by using gravel around a pool is installing a french drain system around your pool also.

Should I fill in my pool with dirt?

Swimming pools are fairly deep, and require large amounts of material to fill. That is why you want to purchase a low cost fill, topsoil will be needed, but only for the surface layer. Our fill is $12.00 per cubic yard. Regular fill dirt is preferred, but tailings are also an option.

Related Question Answers

Can you backfill with sand?

Sand is a key component of a properly backfilled hole or trench in that it provides drainage and compacts well, especially when damp. Above the rock bedding is a layer of felt to prevent the sand from washing into the rock bed, sand and top soil. Properly layering these materials prevents sinking after the backfill.

How much does it cost to backfill a pool?

To remove the top portion of a pool and backfill the rest runs about $3,000-$6,000 for small- to medium-size pools. Larger or hard-to-reach pools run about $6,000-$15,000.

Can I backfill around above ground pool?

Aboveground pools come in kits that the homeowner can assemble, and do not require you to dig a large hole and pour concrete. Aboveground pools installed in a space cut out of a slope can have a small amount of backfill around them, however, to prevent soil erosion.

How deep can you bury above ground pool?

As a guideline, if the pool is going two or more feet down, make the hole 1.5′ bigger than the size of the pool all the way around. EXAMPLE: A 24′ round pool should have a hole that is at least 27′ in diameter. Make sure the bottom of the hole is the desired size and not the top.

Should you put sand under an above ground pool?

Sand is the recommended base material upon which an aboveground pool should sit. Sand is used under an aboveground pool to protect the pool's vinyl liner from rocks and objects that could tear the liner. Also, sand under an aboveground pool acts as cushioning for its floor, making it more comfortable for feet.

What do I put under my above ground pool for grass?

Concrete Pads

It is a good pad for the above ground pool on grass because it is flat and level. It will keep the pool in place, and it would not shift around. But don't forget that concrete is a pretty rough surface, and in the long run, it might damage the pool liner.

How deep can you install a semi inground pool?

Typical INGROUND POOLS have a 3′ shallow end then slope down to 8′. SEMIINGROUND pools are typically flat bottom pools and have a constant depth of either 42″ of water or 46″ of water, depending on the depth of the pool wall panel.

Does the Fire Department fill swimming pools?

News flash: the fire department will not send a truck to your house to fill up your swimming pool. Water from fire trucks is not potable or suitable for swimming. The department does not clean the inside of its tanks … ever.

Do you need a permit to fill in a pool?

Do you need a permit to fill in a pool? That depends on your local government, but in many cases, a permit is required. The cost of a permit can be anywhere from free to several hundred dollars depending on your local municipality.

How long does it take to fill up a pool?

For others that are filling a much larger pool it could take multiple days until your pool water has reached capacity. Assuming your water pressure is pumping at 8 gallons per minute (480 gallons per hour) through your outside water hose, it would take 31.25 hours to fill a 15,000 gallon swimming pool.

Can you build over a filled in pool?

They have to be fully removed and then filled in with proper material. Full removal is required if you plan to build over it. Pools are not structural and cannot support the weight of a building over them when buried.

Do pools add value to your home?

In some areas, adding a pool may increase your annual property taxes, but it won't necessarily add to your home's selling price. For that reason, try to keep your total building cost between 10% and 15% of what you paid for your house, lest you invest too much in an amenity that won't pay you back.

How long can you keep a pool closed?

So how long is too long when it comes to closing a pool? For example pools that are located in cold climate areas are all closed for six months or so every year and they are still fine. It is worth noting that in these areas pools are closed during very cold months when bacteria growth and insects are minimal.

How do you drain an inground pool?

How to Drain an Inground Pool
  1. Rent or buy a submersible pump.
  2. Monitor the Draining Process.
  3. Turn Off and Remove the Submersible Pump.
  4. Open a Hydrostatic Pressure Relief Valve.
  5. Perform the Work You Drained the Pool For.
  6. Replace the Hydrostatic Pressure Relief Valve.
  7. Refill the Pool.
  8. Turn on the Pool Pump.

How many dollar bills does it take to fill a pool?

A dollar bill (according to Wolfram Alpha) has a volume of 0.06943 cubic inches. An Olympic-sized swimming pool has a volume of 152,064,000 cubic inches. Divide the pool by the money and you come up with 2,190,177,157 bills needed to fill a swimming pool.

What can I do with an unused inground pool?

Unwanted swimming pool

Break the concrete that is above ground level. Fill the base with coarse gravel or crushed rock for drainage. Next layer can be finer sand or gravel. Finally fill with regular topsoil and you're ready to plant.

Can you put a pool on grass?

Installing an above-ground pool on a natural grass lawn is not a good idea, particularly if you plan on taking down the pool for part of the year. Since natural grass does get muddy and can be quite slippery when wet, there are also issues around safety and, of course, tracking mud and wet grass into the house.

Do I need a tarp under my pool?

It's OK to use a tarp under the sand but not in place of it. A tarp will allow all the lumps and bumps of a dirt base to show through into the base of your pool. With just a tarp you still have to have a cove for the pool to be safe. The cove can be dirt, sand or foam, but it has to be there.

What is the best stone to put around a pool?

Granite Pool Deck

Granite is used for just about every natural stone application around the house because of its hardness and wide range of available colors and patterns. Granite is also an excellent option for pool decks because it creates an elegant look with its natural shine and it is water resistant.