1. Close the toilet seat cover.
  2. Combine one part vinegar and two parts baking soda to form a paste.
  3. Scrub the hinge area with the scouring paste, using a soft-bristled brush so you don't scratch the porcelain or the hinge, which is usually made of plastic.
  4. Rinse the scouring paste off with clear water.

Accordingly, how do I get the green off my toilet hinges?

How to Remove Green Tarnish From a Brass Toilet Seat Hinge

  1. Remove the toilet seat hinge.
  2. Wash the hinge in hot, soapy water.
  3. Place ½ cup vinegar in a small glass bowl.
  4. Dip a cloth in the vinegar then dip it in a small bowl of salt.
  5. Rinse the hinge with clear water.
  6. Combine equal parts ammonia and hot water.
  7. Rinse the toilet and seat with clear water.

Also, how do you clean toilet screws? Wipe down the entire outside of the tank, bowl, and base, using the toothbrush around the screw holes where the seat attaches. Remove the bolt caps from the base; clean the caps and around the bolts. Using a cloth wet with cleaner over something thin like a screw driver or scraper, wipe between the tank and the bowl.

how do you remove rust stains from toilet seat?

Don Your Gloves and Goggles and Try One of these Safe Rust-Removal Solutions:

  1. Spray-on a mixture of 1-part vinegar to 1-part water and scrub with a hard-bristled brush.
  2. Make a paste of 3-parts baking soda and 1-part vinegar, scrubbing the bowl with it as you would a powdered cleanser.

Is vinegar safe on brass?

Over time, even the shiniest brass gets tarnished, dirty and dingy. In many cases, simple household products such as vinegar and salt can clean brass. They're a safe and inexpensive alternative to commercial cleaners.

Related Question Answers

How does baking soda and vinegar clean brass?

Mix baking soda and white vinegar together to create a paste. It'll fizz for a minute, but will quickly settle down. Then, rub the paste into the copper or brass object that you wish to clean, using your hands or an old toothbrush.

How do I clean green corrosion off metal?

Place a liberal amount of salt on the stain and rub it with a clean tack cloth or rag. Keep rubbing until the bluish green oxidized copper residue is removed totally from the metal. Salt has metal stain cleaning properties that can easily rub off any blemish on a metal including copper.

How do you get green corrosion off brass?

To remove powdery green corrosion:
  1. Swab surface with methylated or white spirit to remove grease and dirt – some tarnish may also be removed.
  2. Cut a chisel shape on the end a bamboo kebab stick and, with care, use it to push off the powdery corrosion product.
  3. Swab lightly with methylated spirit.

What is the green stuff on brass?

When you see that green layer on these metals (usually called patina or verdigris) it's because of a chemical reaction. The copper has reacted with oxygen, water, and carbon dioxide in the atmosphere. Brass is an alloy that's usually made up of 67% copper and 33% zinc.

How do you clean brass with vinegar?

Vinegar. Dissolve 1 teaspoon salt in 1/2 cup vinegar and add enough flour to make a paste. Rub onto the brass and leave for 10 minutes, then rinse and buff dry.

How do you get green mold off brass?

  1. Check to see if it's really brass.
  2. Squeeze half a lemon into your bowl.
  3. Add your baking soda.
  4. Stir the baking soda and lemon mix until it forms a delicious smelling paste.
  5. Use a soft cloth and apply the paste.
  6. Rinse off the paste and dry.
  7. When you're done, give the brass a really thorough rinse.

Can I put vinegar in my toilet tank?

Vinegar — Cleaner and Deodorizer

Vinegar will not harm your toilet's tank, bowl or inner components. Spray the substance on your toilet's interior and exterior surfaces, and scrub vigorously to remove debris. Add 3 cups of vinegar to your toilet's tank and let stand for 30 minutes, then flush to deodorize your toilet.

How do I get brown stains off the bottom of my toilet?

How to Remove Brown Stain in Bottom of Toilet Bowl?
  1. Pour one liter of undiluted vinegar around the sides of the toilet bowl,
  2. Let it be for about three hours,
  3. Scrub off any leftover stains with white vinegar,
  4. Flush the toilet off to get rid of residue,
  5. Repeat if needed.

How do you clean a toilet with baking soda and vinegar?

Baking Soda and Vinegar

Pour about 1 cup of vinegar into the toilet bowl and swish it around with a toilet brush. Let it sit for about one minute. Add about 1 cup of baking soda to the toilet bowl, then add another 1 to 2 cups of vinegar. This will create a fizzing action.

How do you clean a badly stained toilet?

To clean a stained toilet bowl, try soaking a pumice stone in water for 10-15 minutes and then scrubbing the stains with it. You can also try scouring away the stains with a dryer sheet. For mold or mildew stains, apply white vinegar, bleach, or tea tree oil and then scrub the stains with a toilet brush.

How do you clean a toilet with Coke?

  1. Measure out a cup or two of Coke. Open a bottle or can of Coke.
  2. Pour the Coke into the bowl. Pour the Coke around the rim of the bowl.
  3. Let the Coke sit. Patience is key.
  4. Flush. While you let the Coke sit, the acids will slowly loosen the built-up stains in the bowl.
  5. Repeat as needed.

What is the best rust remover?

The Best Rust Remover
  1. Evapo-Rust Original Super Safe Rust Remover. Previous.
  2. Iron OUT Rust Stain Remover Spray Gel. See More Reviews.
  3. WD-40 Specialist Rust Remover Soak. Previous.
  4. Rust Converter ULTRA. See More Reviews.
  5. CLR Calcium Lime Rust Remover.
  6. Metal Rescue Rust Remover Bath.
  7. Loctite Naval Jelly Rust Dissolver.
  8. Whink Rust Stain Remover.

What happens if you don't clean your toilet?

The Worst That Could Happen: Your homie gets a highly unappealing moldy ring around “his” toilet. That bacterial fungus comes from stagnant water from people not flushing enough and it causes that bacteria to grow over time. And that invisible fountain of gross contains bacteria that could lead to an infection.

How do you clean toilet hinges?

  1. Close the toilet seat cover.
  2. Combine one part vinegar and two parts baking soda to form a paste.
  3. Scrub the hinge area with the scouring paste, using a soft-bristled brush so you don't scratch the porcelain or the hinge, which is usually made of plastic.
  4. Rinse the scouring paste off with clear water.

How often should you bleach your toilet?

Your toilet brush should be cleaned with bleach once a month, and replaced every six months.

How do I keep my toilet seat screws from rusting?

Metal screws on a toilet seat can often rust, causing unsightly stains. To prevent the screws on the toilet seat from rusting, fill the holes with tub and tile caulking, then use a putty knife to level the caulking and allow it to dry before closing the lid.