Use a saber saw or jigsaw with a fine-toothed blade for larger circles. Mark or scribe the circle and drill a 1/4-inch pilot hole slightly inside the perimeter. Put the blade through the hole to start the cut, then saw around the circumference.

Similarly, what kind of saw blade do you use to cut plexiglass?

For best results with Plexiglas® MC acrylic sheet, circular saw blades should be the largest diameter possible and contain 60 carbide-tipped teeth with a triple-chip-tooth design. Teeth should be shaped with a 5° to 10° positive rake angle and have sharp cutting edges with adequate clearance.

Also Know, is there a difference between acrylic and plexiglass? While Plexiglass is made from acrylic, there are subtle differences, which can be important depending on the application. While Plexiglas is a trade or brand name, there is a difference in the way it is manufactured compared to standard acrylic.

Similarly, how do you cut a circle in plastic?

Cutting Thick Sheets of Plastic

  1. Mark the line you are cutting along with a permanent or grease marker.
  2. Secure the plastic safely to the work surface with a clamp.
  3. Use the circular saw (or table saw) to cut through the plastic in the same way you'd cut through wood.

Will Home Depot cut plexiglass to size?

Home Depot does not offer plexiglass cutting. If you inquire very politely and on a slow day/time (7–9am is recommended) you may find someone in Millworks/Tool Rental/Building Materials able to assist.

Related Question Answers

Does Lowes cut plexiglass to size?

If you need plexiglass, don't visit Home Depot or Lowes, call a “Professional”. We will cut-to-size & ship sheets of plexiglass directly to your door. The SHEETS – BASIC SIZES (Calculator Tab 3) has a Nominal Cut Tolerance (W x L) of Plus or MINUS . For precision cutting, use the Cut-To-Size Calculator (Tab 1).

Can you cut plexiglass with a jigsaw?

If you have a jigsaw, you can cut Plexiglas. One trick to help prevent splintering is to stick painter's tape over the cut line. Also, don't forget the blade: Find an uncoated (that is, unpainted) fine-toothed sheet metal jigsaw blade (such as DeWalt's 32 TPI).

Can you drill holes in plexiglass?

Plexiglass is a clear, plastic, lightweight alternative to glass. Drilling holes in plexiglass can be challenging. Often the traditional drill bits, used for metal and wood, chip and crack the plexiglass while drilling through its surface. Using a specialty drill bit can help finish your project neatly and safely.

Can you cut plexiglass with a glass cutter?

Use a glass cutter or the dull side of a utility knife to score the plexiglass along the mark line 5 to 10 times. Flip over the sheet and score the opposite side of the piece. Line up the score line with the edge of the work space and clamp it down. Apply a sharp downward pressure to break the piece on the score line.

Can you cut plexiglass with a hacksaw?

There are a variety of ways to cut plexiglass, and one of the least expensive methods is to use a hacksaw, especially if you only have a few pieces of plexiglass to cut. Plexiglass can easily be cut to size.

How much does plexiglass cost?

It's very solid, was easy to cut and drill through, and is crystal clear which is nice! Polycarbonate Plastic Sheet 12″ X 24″ X 0.0625″ (1/16″) 3 Pack Shatter Resistant, Easier to Cut, Bend, Mold than Plexiglass.

Top Selected Products and Reviews.

List Price:$49.99
Price:$34.99
You Save:$15.00 (30%)

Can you break plexiglass?

Acrylic plastic sheets have 17 times the impact strength of glass, meaning, it takes a lot more force to shatter acrylic than glass. Plexiglass sheeting is unique in that while it is extremely difficult to shatter, it can be broken, however, it doesn't break into a thousand tiny, dangerous shards.

Can you cut plexiglass with a razor blade?

For thicker sheets of plexiglass, cut with a power saw—be it a circular saw, saber saw, or table saw. (To cut anything but a straight line, opt for a jigsaw.) There are special blades designed expressly for acrylic, but any metal-cutting blade with carbide tips can do the trick.

What is plexiglass made of?

What is Plexiglas? Plexiglas is a plastic material made from polymers of methyl methacrylate, an ester of methacrylic acid.

How do you cut plexiglass with a Dremel?

With a steady hand, you can cut a straight line or any other shape you would like.
  1. Unplug the Dremel rotary tool if it is plugged in.
  2. Mark the plexiglass where it needs to be cut.
  3. Turn the tool on to 6 or 8 and begin the cut.

Can you cut plastic with scissors?

What Kinds of Plastic Can You Cut with Scissors? It's best to cut thinner plastics with scissors or shears. For example, you can easily cut plastic packaging, bags, and bottles with heavy-duty scissors. If you want to cut heavier plastics, like PVC pipe or plexiglass, you will want to use a different tool.

How do you cut thin plexiglass by hand?

How to Cut Plexiglass by Hand
  1. Place the Plexiglas on a flat work surface.
  2. Mark the Plexiglas with a grease pencil where you want to cut it.
  3. Along the lines you marked, carefully score the Plexiglas five to 10 times with a glass cutter.
  4. Move the scored section to the edge of the work surface.

Can you cut plastic with a jigsaw?

To cut thick plastic, you‘ll need a fine-toothed saw, jigsaw, or table saw, since plastic can be tough to cut through. Start by clamping it to a workbench or holding it firmly so it doesn't move. Then, use a fine-toothed saw to make the cut. Use the full length of the blade and move the saw in quick, smooth motions.

Can I cut plexiglass with a miter saw?

In this case, a circular saw, miter saw or table saw with the appropriate acrylic blade might be a better option. Cutting acrylic on the table saw or miter saw is the same as cutting wood, so long as you use the correct blade. Just switch out the blade as directed in your saw's owner's manual before making the cut.

Can you use plexiglass table top?

Plexiglass is lightweight, transparent thermoplastic that is weather-resistant, making it ideal for a number of household applications including furniture protection. Tables are easily scratched and damaged by objects hitting or sliding on them and spills can permanently stain the table top.

Can I cut Lexan with a circular saw?

When you need to cut Lexan, you can essentially treat it as a sheet of plywood and cut it with any power saw you would use for that material. Make straight cuts with a circular saw or table saw, and curved ones with a band saw or jigsaw. You can form Lexan into elegantly simple furniture.

How do you cut wood without a drill or saw?

Using a drilling machine

In that case a carpenter can easily cut the wood without a saw by a drilling machine. A drilling machine is unlike a knife and it works by creating perforations rather than giving you a perfect cut. So, first of all draw an imaginary line on the wood you have to cut through.

Can a Dremel cut plastic?

Multipurpose Cutting Bit: 561

The Dremel 561 cuts hard wood up to 3/8″ and soft wood up to 5/8″. Also cuts plastics, fiberglass, drywall, laminate, aluminum and vinyl siding. Use with the Dremel Multipurpose Cutting Attachment (model 565).

Can you cut PVC with a circular saw?

It is recommended to use power tools where you secure the PVC pipe to a surface with clamps and move the blade into the pipe, such as miters saws, or in some cases even jigsaws or circular saws.