VIDEO

Moreover, how do you run a hunter XC sprinkler?

X-Core – Manually Run a Single Station

  1. Turn dial to MANUAL – ONE STATION position.
  2. Station run time will flash in the display.
  3. Turn the dial clockwise to the RUN position to run the station (only the designated station will water, then the controller will return to automatic mode with no change to the previously set program).

how do you test a hunter XC sprinkler system? X-Core – Test Program of All Stations

  1. With the dial in the RUN position, press and hold the PRG button. The station number will be displayed and the time will be flashing.
  2. Quickly use the plus (+) or minus (-) buttons to set the run time from 1 to 15 minutes. The run time needs to be entered only once. After a 2 second pause, the test program will start.

Also know, how do you reset Hunter XC?

X-Core

  1. Press and hold down the , and buttons.
  2. Press and release the RESET button on the right side of the controller.
  3. Wait 2 seconds and release the , and buttons. The display should now show 12:00am. All the memory has been cleared and the controller may now be reprogrammed.

How long should you water your grass?

Usually it's about 30 minutes. So 20 minutes, 3 times per week will get an inch of water on your lawn, and 30 minutes 3 times per week will get 1 ½” down. Bear in mind that during extreme heat, you will need to water more, due to evaporation and heat stress on the grass.

Related Question Answers

How do you set up a hunter sprinkler head?

To Increase the Arc
  1. Insert the plastic key end of the Hunter wrench into the adjustment socket .
  2. While holding the nozzle turret at the right stop, turn the wrench clockwise.
  3. Adjust to any arc between 40° and 360°.

Why does my sprinkler system keep running?

There are two reasons why your sprinklers would continue running: It's possible your valves have been opened manually. You'll need to locate your valve box(es) and turn the solenoid(s) clockwise until snug. The solenoid is located on the top of the valve and looks like a cylinder with two wires protruding out of it.

How do I manually run Hunter Pro C?

Pro-C – Manually Run a Single Station
  1. Turn the dial to the MANUAL position.
  2. Station run time will flash in the display. Use the button to move to the desired station.
  3. Turn the dial to the RUN position to run the station (only the designated station will water, then controller will return to automatic mode with no change in the previously set program).

How do you turn off a Hunter sprinkler system?

To put the Node battery powered sprinkler timer in the off mode, use the center button to advance to the off screen and allow the controller to go to sleep in that position. To turn the controller back on, use the center button to return to the home screen and allow the controller to go to sleep in that position.

How do I override my hunter thermostat?

Should you want to temporarily override the program—for example, if you stay home from work one day—here's the process:
  1. Hold down one of the UP/DOWN arrow keys until the display flashes.
  2. Use the arrow keys to move the temperature setting to the desired temperature.
  3. Press the HOLD/RETURN button.

How do I reset my Hunter SRC controller?

SRC Plus Reset
  1. Press and hold down the , and buttons.
  2. Press and release the RESET button in the lower wiring compartment.
  3. Release the , and buttons. The display should now show 12:00a. m.
  4. All the memory has been cleared and the controller may now be reprogrammed.

How do I reset my irrigation system?

How to Reset a Sprinkler System
  1. Turn the control dial to the “off” position.
  2. Press the “next” button to access the clear-memory feature.
  3. Press and hold the “off” button until the display stops blinking.
  4. Turn the control dial to the “run” position.
  5. Press and hold down the “minus” arrow and “prog” buttons simultaneously.

Why is my Hunter irrigation system not working?

If your controller shows irrigation running (Flashing Sprinkler Icon), and your sprinklers are not working, you may have a wiring problem at the valves or the irrigation water supply has been shut down. If the sprinklers do not turn on you may have a valve shut down that supplies the irrigation system.

How do I reset my sprinkler timer?

How can I clear all the programming and reset my Rain Bird ESP-Me sprinkler timer back to the factory default settings?
  1. Turn the dial to Seasonal Adjust.
  2. Press and hold the left and right arrow buttons at the same time for at least 3 seconds. Until you see the word “CLEARED” on the screen.
  3. Turn the dial back to AUTO RUN.

Why wont my sprinklers turn on?

Go to one of the irrigation valves and turn the solenoid 1/4 to 1/2 a turn counter-clockwise. If the valve opens and sprinklers turn on, your valve is working and you'll need to check the controller and field wiring. If the valve did not turn on any of the sprinklers, the water to the valves is still off.