VIDEO

Thereof, how do you change a blade on a Bosch Sawzall?

How to Change the Blade on a Bosch Reciprocating Saw

  1. Hold the saw so it is braced against your body and pointed out and away from you.
  2. Locate the locking collar for the toolless blade changing system.
  3. Grab the collar with one hand, pull it toward the body of the saw and turn it counter-clockwise at the same time.

Beside above, how do you change a blade in a Sawzall? How to Insert a Sawzall Blade

  1. Unplug your Sawzall and set it on a work surface where you have some decent lighting.
  2. Insert the hex key into the blade clamp screw located on the left or right side of the spindle.
  3. Turn the key counter-clockwise to loosen the screw.
  4. Remove the existing blade and set it aside.

Also know, are reciprocating saw blades universal?

Yes, reciprocating saw blades have a universal shank that is standardized to fit all reciprocating saws.

How do you change the blade on a Skil reciprocating saw?

Slide a new reciprocating saw blade through the saw's footplate and into the tip of the saw. Make sure the small hole in the base of the blade inserts beneath the clamp and over the small pin attached to the plunger. Tighten the cap screw on the blade clamp by turning the hex key clockwise.

Related Question Answers

How do you put a blade in a jigsaw?

To change the blade of jigsaw without a tool-less system:
  1. Step 1 – Loosen Screw. Locate the screw holding the shank of the blade in place.
  2. Step 2 – Remove Old Blade. Pull out the old blade from the blade clamp and set it aside.
  3. Step 3 – Insert New Blade.
  4. Step 4 – Tighten Screw.

How do I change the Sawzall Quik Lok blade clamp assembly?

How to Change the Milwaukee Sawzall QUIK-LOK Blade Clamp Assembly
  1. Remove external retaining ring (7) and pull front cam (6) off.
  2. Pull lock pin (1) out and remove remainder of parts.
  3. Coat new lock pin with powdered graphite.
  4. Hold tool in a vertical position.
  5. Place spring cover (2) onto spindle.