Replacing a slip-on spout is easy: Just loosen the setscrew (usually with a hex wrench) and pull the spout off the copper pipe that protrudes from the wall. Twist the spout as you pull and be gentle so you don't loosen any pipe connections inside the wall. Then slide on the new spout and tighten the setscrew.

Likewise, people ask, how do you remove a tub spout without set screws?

Step 1: Remove any caulking around the wall end of the tub spout with a putty knife or razor. Step 2: Unscrew the tub spout in a counterclockwise rotation until the tub spout is removed off of the brass adapter. Step 3: Use a 1/8″ hex/Allen wrench and un tighten the Allen screw counterclockwise.

Secondly, how do you replace a tub faucet with no wall access? How to Replace Tub Faucets With No Wall Access

  1. Turn off the water valves at the main incoming water pipe.
  2. Remove the cap on the faucet handle and loosen the screw underneath with an Allen wrench.
  3. Pry out the clip around the cartridge with a pair of needle-nose pliers.
  4. Install a new cartridge inside the faucet head.

Likewise, how do you cut a tub spout?

The first step is to cut through any caulk between the spout and wall. Then grip the spout near the wall with a 10-inch pipe wrench and try again with a little more gusto. Push counter-clockwise, using steady pressure. If that approach doesn't work, you'll need to cut off the spout with a hacksaw.

Should I caulk around tub spout?

Caulking is a “must do” project to keep water from going behind your bathtub and wall tiles. Yes, you need to caulk around your bathtub's faucet. The caulking will keep any water and other liquids from going behind the faucet and into the wall behind the bathtub/shower assembly.

Related Question Answers

How do you fix a bathtub spout?

Replacing a slip-on spout is easy: Just loosen the setscrew (usually with a hex wrench) and pull the spout off the copper pipe that protrudes from the wall. Twist the spout as you pull and be gentle so you don't loosen any pipe connections inside the wall. Then slide on the new spout and tighten the setscrew.

How do you fix a loose tub spout?

How to Fix a Loose Tub Faucet Spout
  1. Step 1 – Locating the Set Screw. Look beneath the tub spout to check if there exists any set screw.
  2. Step 2 – Open the Tub Spout. Using the screwdriver, place its tip inside the end of the bathtub spout.
  3. Step 3 – In Case Of Twist-on Spout.
  4. Step 4 – Get the Right Faucet Spout.
  5. Step 5 – Installing New Faucet Spout.

How do you remove a stripped tub spout?

A careful removal procedure will ensure a rapid and proper replacement of the spout.
  1. Hand-turn the tub spout in a counterclockwise direction.
  2. Clean the spout's pipe of any debris.
  3. Remove the pipe's end nipple with a pipe wrench in a counterclockwise direction, if the threads are damaged.

How do you fill gap between tub spout and wall?

If you've got a gap of 1/2 inch or less after you tighten the spout as far as it will go, the best way to erase it is to fill it with silicone caulk. Choose white caulk or one that matches the wall color, spread a thick enough bead to fill the gap, then tool it with your finger to give it a concave shape.

How far above tub should spout be?

4 inches

How do you fix a shower diverter valve?

Diverter Valve on a Three-Valve Shower
  1. Pop the handle's plastic button off with a blunt knife or ruler.
  2. Loosen the screw on the handle.
  3. Unscrew and remove the handle.
  4. Remove the sleeve over the diverter.
  5. Remove the diverter using a socket wrench.

How does a tub spout diverter work?

How Does a Tub Diverter Valve Work? Basically, the main water pipe running to the bathroom starts at the tub faucet and then runs vertically to connect the same waterway to the showerhead above the faucet. When the faucet is turned on, water rushes to the first port and drains into the tub.

How do I replace my bathtub?

  1. Step 1: Pull Out Drain. From inside the tub, unscrew and remove the overflow cover plate.
  2. Step 2: Disconnect Drain.
  3. Step 3: Disconnect Waste-and-Overflow.
  4. Step 4: Remove Tub Spout and Tiles.
  5. Step 5: Pry Away Tub.
  6. Step 6: Lift and Slide Tub.
  7. Step 1: Check the Drain.
  8. Step 2: Dry Fit Tubes.

What is a tub spout?

Diverter Tub Spouts

A diverter tub spout is designed with a mechanism inside that allows water to flow upward. The features of a diverter type tub spout includes a button that can be held up or one that is attached to the wall that creates the diversion of water from the bath to the shower.

What causes a leaky bathtub faucet?

The most common cause of a leaky tub faucet is a worn out washer. You can save yourself a ton of money on your water bill by replacing the old washer with a new one. Use these steps from Newcomb and Company to replace your worn out washer and stop your faucet from leaking!

How do you measure a bathtub spout?

Measure. Measure the length of your tub spout from the back edge of the spout to the front where the threads start on the inside of the spout. Then measure the distance from the surface of the wall to the back of the threaded elbow inside the wall. Total the two and add 1/4 inch.

How do you remove a drain from a bathtub?

Steps
  1. Unscrew a foot plug drain's stopper. Put on your rubber gloves and grasp the center stopper.
  2. Pop out a lift-and-turn drain's stopper. Grasp the stopper and pull up on it.
  3. Remove the faceplate of a trip lever drain. Set your tub to the “open” position, if it has a visible stopper.