Pull the starter handle with your right hand and pull out the starter cord slowly until you feel a resistance. Then, firmly and rapidly pull the starter handle. Pull rapidly until the engine fires, or tries to start.

Just so, how do you adjust the carburetor on a Husqvarna 240?

How to Adjust a Husqvarna Carburetor

  1. Set the Husqvarna chain saw on a level surface.
  2. Start the chain saw and allow the engine to warm for five minutes.
  3. Turn the screw with the “L” stamp clockwise with a screwdriver until the screw stops.
  4. Place the screwdriver on the screw with a “T' stamp.

Subsequently, question is, do you start a chainsaw with the brake on? Always start your chainsaw with the chain brake engaged so the chain does not move.

Beside above, how does Husqvarna Smart Start Work?

One of the key features of this saw is Smart Start. This feature is proprietary to Husqvarna, and it makes starting easy. placing the saw on the ground and then holding it in place by putting your foot through the rear handle, pulling the starter cord with your right hand until the engine fires.

What is the best Husqvarna chainsaw?

Husqvarna 460 Rancher Chain Saw The chainsaw can be used for commercial applications. It is the best Husqvarna chainsaw for professionals too. It is a large and powerful chainsaw that can handle most of chainsaw applications. It is the best big Husqvarna chainsaw.

Related Question Answers

What is the biggest Husqvarna chainsaw?

Our largest chainsaw is one of the most powerful in the world. The primary applications for the 3120 XP® is extreme logging, portable saw mills, and stump work. This saw is designed to pull the chain on our longest bars– up to six feet! Like all Husqvarna chainsaws, the 3120 XP® has a superior power/weight ratio.

What is the best chainsaw?

View the Best Chainsaw on the Market, Below.
  1. Best Overall: WORX WG303.
  2. Husqvarna 455 Rancher 2-Stroke Gas-ChainSaw.
  3. Best Value: Remington RM1425 Electric Chainsaw.
  4. BLACK+DECKER LCS1240 Chainsaw.
  5. DEWALT DCCS690M1 XR Brushless Chainsaw.
  6. EGO Power+ 14-Inch Cordless Chain Saw.
  7. GreenWorks 20362 10-Inch Cordless Chainsaw.

What does a decompression valve do on a chainsaw?

What is a decompression valve? A decompression valve releases some of the compression from the combustion chamber during the starting procedure, making the engine easier to turn over when pulling the recoil rope.

What is the easiest chainsaw to start?

Here are our reviews of the 4 best easy start chainsaws on the market:
  • Husqvarna 20-Inch 50.2cc Powered Chain Saw With Smart Easy Start.
  • Tanaka 32.2cc 14-Inch Top Handle Chain Saw with Easy Start Pure Fire Engine.
  • Husqvarna 460 Rancher 60.3cc Gas Powered Chain Saw.

Is there a gas chainsaw with electric start?

Gas Chainsaws with Electric Starts

An electric start chainsaw might sound like the perfect solution to the problems that people have when starting a chainsaw. We hate to inform you, but gas chainsaws with automatic electricstart systems don't exist.

How tight should a chainsaw chain be?

A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can't pull the drive links out of the bar nose.

Can you start chainsaw without bar?

There is no reason to run without bar and chain.

Can you flood a chainsaw?

Start a flooded chainsaw without pulling the plug.

The typical cure for this is to remove the spark plug and yank the rope several times to blow the excess fuel mix out of the combustion chamber.

How do you ground a chainsaw log?

Option A: Cutting from the Ground
  1. Start up the chainsaw (running at slow speed)
  2. Position over the pre-marked points on the trunk.
  3. Saw 3/4 of the trunk.
  4. Repeat for every pre-marked section.
  5. Rotate the trunk 180 degrees.
  6. Finish the cut by sawing through the opposite side.

What does the C mean on Stihl chainsaws?

Professional Saws

And at STIHL, we have a particular fondness for our professional category chainsaws. To help you identify model features, look for these corresponding symbols: C = Comfort feature, E = Easy2Start™, Q = an additional chain braking system, R = wrap handle, and M = STIHL M-Tronic™.

What does a choke do on a chainsaw?

The choke position increases the richness of the air and fuel mixture the carburetor sprays into the cylinder. With the master control lever in the choke position, the flow of fuel into the engine increases and the flow of air decreases.

How does the brake work on a chainsaw?

Chain Brake: Located on the top handle of the chainsaw, the chain brake is used to stop the chainsaw chain from rotating around the bar. There are two ways to engage the chain brake: by pushing the handle forward, or by force of inertia that occur when the saw kicks back.

How do you troubleshoot a Husqvarna chainsaw?

Troubleshooting A Husqvarna Chainsaw
  1. Step One: Check the chainsaw's gas tank to determine if there is enough gasoline.
  2. Step Two: Next, check the spark plug to make sure it is in good condition.
  3. Step Three: Let the engine run for a few minutes so that it warms up before actually using the chainsaw.