The general purpose of any power trowel is to make lighter work of troweling and finishing concrete. In any concrete pour there is the important step of troweling the concrete to continue the process of consolidating the concrete and to aid in the process of squeezing out the excess water and laitance.

Also know, how does a ride on trowel work?

Ride-on power trowels are used by an operator sitting on a seat upon the machinery, controlling the power trowel with the necessary buttons. Walk-behind power trowels are used by an operator walking behind the machine.

Subsequently, question is, what is the difference between a trowel and a float? A float has a thicker base than a trowel and is usually made of plastic, sponge, rubber, wood or magnesium – a lightweight pale grey metal. It's used to even up the surface on plaster or concrete, make it firmer and give whatever texture is required. The finish will depend on the float chosen.

Likewise, people ask, how long do you wait to power trowel concrete?

Allow all of the water to disappear before you do anything else. This can take 20 minutes or 4 hours depending on the temperature, humidity and how hard the wind is blowing. After the bleed water is all gone, you can get out your steel finishing trowel and put on the final touches.

What does a concrete trowel machine do?

A power trowel, walk-behind trowel, or trowel machine, may have many different names, but their job is to create a level, smooth concrete surface such as a patio slab or interior floor. Different jobs require different types of trowels, however. And, different types of blades.

Related Question Answers

When should I trowel concrete?

Actually, exterior concrete surfaces don't need to be troweled at all. But if you want to use a trowel to knock down the ridges left by the bull float when concrete finishing, make as few passes as possible and wait until all the surface “bleed water” is gone.

What is trowel finish concrete?

Trowels. Troweling produces a hard, smooth, dense surface and should be done immediately after floating. Troweling can be done by machine or by hand. Putting a long handle on the trowel allows finishers to trowel the concrete without walking out onto the slab.

How do you finish concrete?

Part 3 Finishing, Stage Two
  1. Smooth and compact the surface once again with a hand float. This is the final smoothing, bringing the more consistent “cream” of the concrete to the surface for a level, durable finish.
  2. Consider a trowel finish.
  3. Try a broom finish.
  4. Cure the concrete.
  5. Seal the concrete.

How do you float a concrete floor?

Pour a Floating Concrete Floor
  1. Step 1: Patch the Existing Concrete Slab. We used Quikcrete's Vinyl Concrete Patcher to fill the cracks and to smooth the floor as much as possible.
  2. Step 2: Creating the “Floating” Layer.
  3. Step 3: Mixing the Concrete.
  4. Step 4: Pour the New “Floating” Concrete Slab.
  5. Step 5: Finishing the Slab.
  6. Step 6: Ready for Use.

How do you trowel concrete?

Trowel the surface

Smooth the surface with a steel trowel after it's partially hardened. Hold the trowel almost flat and swing it in large overlapping arcs while applying pressure. Float the concrete when you're done grooving and edging (Photo 6).

How much does a bull float cost?

Average costs: You'll pay about $100 to $125 for a 4-foot magnesium bull float with bracket, and $18 for a 14-inch magnesium hand float. The price of wood floats varies, depending on the type of wood used, but will generally be lower than the cost of magnesium.

What does it mean to burn concrete?

Burnished concrete is the polished concrete finish where there is no aggregate exposed. This is achieved by a few steps. First the concrete when placed must be placed as level as possible as we are not removing any material from the surface any high's and lows will remain in the concrete.

How do you pour a concrete driveway?

Pouring a concrete driveway

Thoroughly dampen the gravel. Start placing the concrete at one corner of the form while a helper uses a shovel or hoe to spread it (above). Pour the concrete up against the form and compact it into all corners with a square shovel or mortar hoe; with a hoe, push- don't drag the concrete.

What tool do you use to smooth concrete?

Use a Finishing Trowel

To finish the concrete, use a steel finishing trowel to achieve a smooth texture. The tool brings water to the surface of the concrete.

What does a magnesium float do to concrete?

Magnesium. Although they are slightly weaker than their aluminum counterparts, magnesium floats are lighter and are the most popular choice among professionals. Magnesium smooths the surface of fresh concrete and opens the pores for proper evaporation, all without pulling the surface like a wood or resin tool.

What is a finishing trowel used for?

Float trowel or finishing trowel is usually rectangular, used to smooth, level, or texture the top layer of hardening concrete. A flooring trowel has one rectangular end and one pointed end, made to fit corners. A grout float is used for applying and working grout into gaps in floor and wall tile.

Do you have to float concrete?

Floating has to be done on virtually every concrete job after concrete is poured and leveled. (Leveling is usually accomplished with a screed.) Done properly, floating pushes the aggregate down into the concrete and encourages moisture to rise, helping the concrete dry and creating a smoother surface.

What are the different types of trowels?

Types of Trowel for EWI and Render
  • Plastering Trowel. Plastering trowels are the most versatile and useful trowel to have in your collection.
  • Notch Trowel.
  • Bucket Trowel.
  • Rendering Spatula.
  • Corner Trowel.
  • Plastic Render Float.
  • Sponge Float.
  • Pointing Trowel.

What are the different types of concrete finishes?

To learn more about different types of concrete finishing for your concrete projects, check out this great list.
  • Concrete Basics.
  • Troweled Finish.
  • Broom Finish.
  • Exposed Aggregate Finish.
  • Salt Finish.
  • Stamped Concrete Finish.
  • Stained Concrete.
  • Polished Concrete.

How do you use a wood float?

To use a Wooden Float, hold the handle firmly with one hand and position the plain against the surface without any tilt such that it makes full contact. “Floating” involves applying pressure against the surface in order to compact the layers of mortar and eliminate air gaps.

What is a bull float used for?

Finishing is a process that gives a concrete surface the desired smoothness, texture and durability. A bull float is a tool used for finishing concrete. A bull float is used to level and smooth freshly poured concrete.

How do you use a finishing trowel?

How to Use a Finishing Trowel. Wait until the “bleed water” on the surface of the concrete is reabsorbed but before the concrete dries to get to work with your finishing trowel. If you can press hard with your fingertip and leave only a slight impression, you can start using your trowel to smooth the surface.

How do you steer a power trowel?

Steering the ride-on Trowel

The operator has two steering control levers to move the machine. One on the right side of his chair and one on their left. The left lever moves in a forward and backward motion which allows the operator to move the unit forward and backward on the left side of the unit.

Who invented the power trowel?


The power trowel has been used without significant improvements for over 50 years! The Rhino-tuff team, including power trowel co-inventor Marvin E. Whiteman Jr.,have implemented the improved performance you've been waiting for. US made with pride in our Central Minnesota factory.