128 divided by 1/6 (2/12)=21.3 cubic feet orabout ¾ cubic yard. A 50 pound bag of sand is about 3cubic feet…so it looks like 7-8 bags should work for 2inch depth.

Also to know is, how many pounds of sand are in a cubic yard?

A popular site states the density of sand to be100 pounds per cubic foot. A cubic yard is 27cubic feet ( a cube with edges of length 3 feet). Hence27*100=2700 pounds per cubic yard would be a decentapproximation.

how much is a cubic yard of sand? A cubic yard is equal to 27 cubic feet.You can use the online calculator to determine how many cubicyards of material are required. As a general guide, 1 cubicyard of aggregate, sand, or dirt is equivalent to 1.5tons.

One may also ask, how many 50 pound bags of concrete are in a cubic yard?

One 50pound bag of Quikrete Fast SettingConcrete Mix yields about .375 cubic feet. Forexample, if you need to cover 33.333 cubic feet, using60-pound bags of concrete, divide 33.333 cubic feetby .45 cubic feet to get 74.07 total bags ofconcrete.

How do I calculate how much sand I need?

To determine how much sand, topsoil or stone you need tofill an area:

1. Measure number of square feet in the area.
2. # of square feet x depth in feet = # of cubic feet.
3. # of cubic feet /divided by 27 = # of cubic yards.
4. # of cubic yards x (unit weight in pounds / 2000) = # of tonsneeded.

## How many 40 pound bags of topsoil are in a cubic yard?

For reference: One cubic yard equals 27cubic feet. A 40 pound bag of topsoil usuallycontains about .75 Cubic Feet of soil. There are 25.71404638Dry Quarts in a Cubic Foot, so a 25 quart bag ofpotting soil would equal approximately 1 CubicFoot.

## How much does a truckload of sand cost?

Sand Prices

A load of masonry sand, river sand, orgranite sand will cost anywhere from \$25 to \$40 perton. One ton of masonry sand or river sand will coverroughly 35 square feet, 1 inch thick.

## How much area will a 50 lb bag of sand cover?

A 50 pound bag of sand is about 3 cubicfeet…so it looks like 7-8 bags should work for 2 inchdepth.

2 inches

## How many cubic yards does a dump truck hold?

Small Pickups and Trailers: Can usually handle 1 cubicyard of soil to maybe 1½ of mulch. Dump Trucks: If you'rehaving the material delivered, a small dump truck usually carriesabout 5 cubic yards, and a larger one carries about 10 cubicyards or more.

400-800 lbs

## How do you convert cubic yards to tons?

A general rule of thumb when converting cubicyards of gravel to tons is to multiply the cubicarea by 1.4. For your reference, gravel typically weighs 2,800pounds per cubic yard. In addition, there are 2,000 poundsto a ton. For instance, if your area to be landscaped is 100cubic yards, multiply that by 1.4.

## What does 1 yard of sand weigh?

1 yard of dirt on average weights around2600 pounds.

## How many 80lb bags of concrete are in a cubic yard?

A 80 lb. bag provides 0.6 cubicfeet of cured concrete. If you have concretedelivered it is sold by the yard (which is a cubicyard = 27 cubic feet).

## How many bags of cement do I need for 1 yard?

Pure cement, sand and crushed rock allhave about the same density, so a block of purecement measuring 1 cubic yard of volume (about3,600 pounds) will contain 45 bags ofcement.

## How many square feet are in a cubic yard?

One Cubic Yard = 27 Cubic Feet Length x Width = SquareFeet
1 YD4 YD
Depth
4 Inches81 sq.ft.324 sq.ft.
5 Inches65 sq.ft.260 sq.ft.
6 Inches54 sq.ft.216 sq.ft.

## How many bags of cement do I need to plaster a room?

To plaster 1 room, you'll need 6 bagsof cement since you'll need about 3 bags toplaster the internal walls.

## How many yards of sand are in a dump truck load?

Dump trucks are rated by how many cubicyards they carry. The average commercial dump truckholds anywhere from 10 to 14 cubic yards of dirt. Find outmore about Earth Haulers' hauling equipment.

54 bags

## How much is a ton of sand?

Average Cost of Sand PerTon

A ton of granite sand typically coversaround 75 square feet, two inches thick. The cost ofsand per ton depends on the kind of sand asthere are several types used in many different projects. Butthe most common type of sands like the ones mentioned abovecost around \$25 to \$40 per ton.

## How do you calculate sand?

How much sand do I need?
1. Determine the length and width of the cuboidal excavation.
2. Calculate the area of the excavation by multiplying the lengthby the width.
3. Establish the depth of the excavation.
4. Multiply the area by the depth of the excavation to obtain itsvolume: 36 * 0.5 = 18 cu yd .

## How many yards are in a cubic yard?

A cubic yard is the volume of a cube with thelength, width and height of one yard (3 feet or 36 inches).One cubic yard is equal to 27 cubic feet. To help youpicture this, the volume of two washing machines is just over acubic yard.

## How many square feet will a yard of sand cover?

1 Yard of Mulch will cover approximately100 square feet at a 3 inch depth. 1 Cubic Yard of Sandcan weigh between 2,600 to 3,000 lbs. or up to one and a halftons approximately. 1 Ton of Sand will cover between 80 to100 square feet at a 2 inch depthapproximately.