17 inches

Just so, what is the standard size of a toilet?

Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″.

Furthermore, what is toilet universal height? Alternatively, Universal Height, also called Comfort Height or ADA Compliant Height, measures between 17 and 18 inches from the floor to the top of the toilet seat. These toilets are becoming very popular in homes, as they are comfortable and favored by the elderly.

Similarly one may ask, how do I measure a toilet?

Taking Measurements Start by measuring from the wall behind the toilet to the center of the bolts at the base of the toilet. If your existing toilet has four bolts, measure to the center of the back bolts. This measurement is known as the rough-in measurement.

What is toilet rough in dimension?

The toilet rough-in refers to the distance from the finished wall to the center of the toilet's floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it's not uncommon for older homes to have an unusual size such as 10″ or 14″.

Related Question Answers

What is the smallest space for a toilet?

Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.

What is the height of an average toilet?

Today's so-called “comfort height” or “right heighttoilets feature bowls that are 17 to 19 inches high, as compared to the standard 15 inches of a regular toilet. The higher bowl height can be good for the knees and back and can offer real advantages to taller folks, the elderly and people with mobility problems.

How do you design a bathroom layout?

As you plan your bathroom, here are some tips to create a layout that will work for you:
  1. The toilet sets the tone.
  2. Take a headcount.
  3. Consider storage.
  4. Give yourself space.
  5. Overlap space.
  6. Clear the air.

Do all toilets fit the same?

Most toilets will have a 12 inch rough-in. If you're replacing an existing toilet, look for a replacement toilet with the same rough-in. A toilet with a larger rough-in measurement will require you to change your plumbing configuration or move the wall to get the toilet to fit.

How do I know if my toilet is 10 or 12?

Rough-in

To find out your toilet's rough-in, measure from the wall behind the toilet to the middle of the closet bolts, which hold your toilet to the floor. That distance will likely be a bit more than the standard 10″, 12″, or 14″ rough-in dimensions. Round your measurement down to the nearest standard rough-in.

How far from the wall should a toilet be?

Standard drywall is 1/2 inch thick, so the plumber should set the toilet flange at least 15-1/2 inches from the center of the flange to the wall framing. The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing.

How much should it cost to have a toilet installed?

A standard toilet install should take between one and two hours to complete and cost an average of $348 or less. Basic installs will run around $115. Unexpected costs could raise the cost up to as much as $800.

How wide is a toilet bowl?

Typical toilet dimensions

Total height of one piece gravity toilet might vary from 21 to 30 3/4 inches (53 – 78 centimeters) with 14” – 16” (356 – 406 mm.) distance from the floor to bowl rim. Depth usually stays within 27” – 30” (686 – 762 mm) and width very rarely exceed 20 in (508 mm).

What do I need to install a toilet?

Required Materials for this how to change a toilet Project
  1. Brass toilet bolts.
  2. Caulk.
  3. Flexible water supply.
  4. Plastic shims.
  5. Toilet flange.
  6. Wax ring.

How do I make my toilet higher?

5 Ways to Increase Toilet Seat Height
  1. Install a Tall Toilet Seat.
  2. Install a Toilet Riser.
  3. Install an Elevated Toilet Seat.
  4. Place a Toilet Frame Over the Toilet.
  5. Use a Mechanical Toilet Seat Lift.

Why are new toilets taller?

Seat Height

Unlike standard bowls, whose rims stand about 14 or 15 inches above the floor, most “comfort height” toilets are 17 to 19 inches high. Some people find them to be more comfortable to use because the added height makes it easier to get on and off the throne.

What height should a toilet be?

Standard toilet heights measure 14 1/2 inches from the floor to the bowl's rim, not including the seat. Comfort height toilets measure at least 16 inches from the floor to the bowl's rim and may measure higher.

How high is a standard toilet?

The newest and most popular comfort height is typically around 16 1/8” floor to rim. The standard ADA (Americans with Disabilities Act) height toilets must have, a 17”-19” floor to bowl rim height, including the seat. You should also consider the toilet rough-in from the wall, which is commonly 12”.

Which toilet is better toto or American standard?

Toto and American standard toilets are very easy to clean and maintain. This is because of their flushing systems that clear everything in just one flush. But Toto is much easier to maintain when compared to American standard because of its double cyclone flush system.

What is the tallest toilet you can buy?

When you put a toilet seat on the bowl, the height will increase a little more. So Toto Drake 2-piece toilet is the best tall toilet you can buy. The Toilet is approved by ADA to be used for people with disability. It comes with G-Max Flushing System that requires 8 psi static water pressure to flush properly.

Why are toilets so low?

Why are toilets made so low to the ground? It is claimed by some that this low height forces users into a position which enables better bowl function / flow and that in fact raising the feet off the ground further increases that function.

Are Toto toilets better than Kohler?

After looking at the Kohler vs Toto toilets brands, it is clear that Toto is a better brand; but Kohler is still a quality and reliable brand as well. Toto is superior because it has a more powerful flushing system, needs less maintenance, and it is very silent when compared to Kohler toilets.

What does 10 inch rough in mean for toilet?

Toilet rough in measuring: from wall to bolt cap. When talking toilets, the toilet rough in is the distance from the wall behind the toilet to the center of the outlet pipe where the waste leaves the toilet. For those cases, toilets are available with a 10inch rough or 14-inch rough.

How do you measure a rough in corner for a toilet?

To determine the toilet rough-in location, measure and mark the rough-in length out from the corner on each wall. For this example, a toilet with a 12″ rough-in was used. 2. Use a straight edge to draw two perpendicular lines from the marks created in the previous step.