In 2016, urea was around $390 per ton, 2017 prices hovered around $350 per ton and 2018 prices were closer to $365 per ton during the May planting periods. “At $418 per ton, and with 920 pounds of nitrogen in a ton of urea, that implies a price of approximately $0.45 per pound of nitrogen,” said Parman.

Also, how much is a ton of urea?

Potash had an average price of $392/ton, up $1; urea $434/ton, up $16; UAN28 $271/ton, up $4; and UAN32 $314/ton, up $4.

what's the price of potash today? Stats

Last Value245.00
Last UpdatedFeb 5 2020, 12:38 EST
Average Growth Rate6.18%
Value from 1 Year Ago215.50
Change from 1 Year Ago13.69%

Accordingly, what is the price of fertilizer?

DTN Retail Fertilizer Trends DAP had an average price of $456/ton, MAP $466/ton, potash $381/ton, urea $387/ton, anhydrous $496/ton, UAN28 $245/ton and UAN32 $284/ton. The remaining fertilizer, 10-34-0, was slightly higher from last month with an average price of $472/ton.

How much does anhydrous ammonia cost?

Anhydrous ammonia prices averaged $512 per ton in August 2018 and $496 in September 2018. These 2018 prices were above 2017 prices. The August 2018 price is $62 per ton higher than the July 2017 price of $450 per ton. The August 2018 price is $94 per ton higher than the September 2017 price of $402 per ton.

Related Question Answers

What is urea made of?

The chemical compound urea is made by heating ammonium carbamide, a combination of ammonia and carbon dioxide, in a sealed container. The heat dehydrates the compound and forms urea, a crystal-type substance.

How long does urea last in soil?

But with the enzyme urease, plus any small amount of soil moisture, urea normally hydrolyzes and converts to ammonium and carbon dioxide. This can occur in two to four days and happens more quickly on high pH soils.

What is urea used for in farming?

Urea fertilizer is a stable, organic fertilizer than can improve the quality of your soil, provide nitrogen to your plants, and increase the yield of your crops. You can usually get it in a dry, granular form. There are several benefits to using urea as a fertilizer, but urea is not without its disadvantages.

How much fertilizer do I need per acre?

Formula. The suggested amount of nitrogen for 1,000 square feet of grass is 1 lb. Since an acre of lawn is 43,560 square feet, divide that by 1,000, according to the University of Illinois. That equals 43.56, then multiply that by the number of lbs. of fertilizer needed per 1,000 feet, which, in this case is 1 lbs.

Where does urea fertilizer come from?

Urea is an inexpensive form of nitrogen fertilizer with an NPK (nitrogen-phosphorus-potassium) ratio of 46-0-0. Although urea is naturally produced in humans and animals, synthetic urea is manufactured with anhydrous ammonia.

How much does bulk fertilizer cost?

BULK FERTILIZERTON
POTASH00-00-60$314.43
09-23-30$360.82
Anhydrous82-00-00$391.75
28%28-00-00$206.19

What is the price of nitrogen fertilizers?

DAP had an average price of $491/ton, down $3; potash $387/ton, down $6; urea $412/ton, down $16; and 10-34-0 $470/ton, down $16. On a price per pound of nitrogen basis, the average urea price was at $0.45/lb. N, anhydrous $0.32/lb.

How much is a bag of fertilizer?

Lawn Fertilizer Average Costs

A bag of lawn fertilizer might cost $6 to $26 depending on the pounds per bag and the fertilizer nutrient profile.

What is the price of nitrogen?

Urea, at 45% actual N is currently at $0.57 cents per pound and UAN32 solution contains 32% actual N at a price tag of $0.61 cents per pound.

What is DAP fertilizer?

Diammonium phosphate (DAP) is the world's most widely used phosphorus fertilizer. It's made from two common constituents in the fertilizer industry, and its relatively high nutrient content and excellent physical properties make it a popular choice in farming and other industries. Production.

What is MAP fertilizer?

Monoammonium phosphate (MAP) is a widely used source of phosphorus (P) and nitrogen (N). * It's made of two constituents common in the fertilizer industry and contains the most phosphorus of any common solid fertilizer. Production. The process for manufacturing MAP is relatively simple.

What is the price of potash per tonne?

DAP had an average price of $495/ton, up less than $1; potash $394/ton, up $2; urea $430/ton, up $1; UAN28 $272/ton, up $3; and UAN32 $320/ton, up $2.

How much potash is left in the world?

In 2018, the estimated global reserves of potash were 5.8 billion tonnes (potassium oxide equivalent). Canada had the second largest reserves with 1.2 billion tonnes.

What is potash used for?

About 95% of potash is used for fertilizer in agriculture with the remaining 5% used in commercial and industrial products such as soap. Where potassium is deficient in the soil, potash fertilizers can correct the problem and boost crop yields and quality.

How much does potassium chloride cost per ton?

Price for potassium chloride from 2014 to 2030 (in U.S. dollars per metric ton)
Price in U.S. dollars per metric ton
2018216
2017218
2016260
2015296

Why do farmers spray anhydrous ammonia on their fields?

Anhydrous ammonia is one of the most efficient and widely used sources of nitrogen for plant growth. Consequently, when anhydrous ammonia and moisture come into contact, they rapidly combine. When it is injected into the soil, the liquid ammonia expands into a gas and is readily absorbed in the soil moisture.

How deep should anhydrous be applied?

Applying the anhydrous ammonia at the proper depth (at least 6 to 8 inches in 30 to 40 inch spacings);

Why do farmers use anhydrous?

Below are some facts about the production and use of anhydrous ammonia and other fertilizers, which most farmers use to boost nitrogen levels in the soil and raise crop yields. * Farmers inject anhydrous ammonia into the subsoil in a liquid form. Once in the ground, the fertilizer reverts to a gaseous state.

How Anhydrous ammonia is made?

Ammonia has many applications and is one of the most commonly manufactured inorganic chemicals. Anhydrous ammonia is prepared commercially from natural gas, air and steam. Remove the sulfur from natural gas with hydrogen to produce hydrogen sulfide as a byproduct. Add steam and a catalyst such as ferric oxide.