To pour a typical 10×10 concrete slab will cost $670 to $930, a 12×12 slab for a patio will cost $796 to $1,476, a 20×24 driveway slab runs between $1,440 and $3,360, and a 24×24 slab for a garage will cost $3,058 to $5,944.

Keeping this in consideration, how much does it cost to cement a patio?

Total Cement Patio Cost Of course, if you choose to DIY, your cement patio cost will only come down to materials. However, if you hire a pro, cement patio costs range between $5 and $11 per square foot. As such, a 100sf cement patio typically runs homeowners between $500 and $1,1,00 total.

One may also ask, how do you calculate the cost of concrete? How to calculate concrete:

  1. Determine how thick you want the concrete.
  2. Measure the length and width that you'd like to cover.
  3. Multiply the length by the width to determine square footage.
  4. Convert the thickness from inches to feet.
  5. Multiply the thickness in feet by the square footage to determine cubic feet.

Also asked, how much does a 20×20 concrete patio cost?

The average cost to pour a concrete patio is $2,433, with most homeowners paying between $1,212 and $4,318 for professional installation. Labor costs can run between $3 and $10 per square foot and materials cost $1 to $2 per square foot.

How much does a 12×12 paver patio cost?

Material Choices

MaterialPrice Per Square FootTotal Cost
Concrete$6-17$864-2,448
Brick$8-12$1,152-1,728
Pavers$10-25$1,440-3,600
Flagstone$15-30$2,160-4,320

Related Question Answers

How much does a 12×12 concrete patio cost?

Cost To Pour Concrete Patio Slab

A concrete patio is generally 4” thick and costs $5.53–$10.25 per square foot to install. For a typical 12×12 patio slab costs ranges from $796 to $1,476.

What is the cheapest material to use for a patio?

Poured or stamped concrete ($$)

Concrete is one of the most popular patio materials and the cheapest material you can use to build a hard-surface patio. Concrete is made of aggregates and paste—concrete aggregates can be crushed stone, sand, gravel, or even shells; the paste is made up of water and cement.

Is decking cheaper than concrete?

Decking will be way cheaper than concrete if price is an option. Decking looks nicer in my opinion as well, but doesn't last as long.

What is cheaper concrete or pavers?

While concrete is usually cheaper than pavers at installation, pavers require less in terms of long-term maintenance. As a result, concrete can potentially be more expensive over time than pavers, depending on the environment.

What's the difference between concrete and cement?

What is the difference between cement and concrete? Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is a mixture of aggregates and paste. The aggregates are sand and gravel or crushed stone; the paste is water and portland cement.

What is cheaper wood deck or concrete patio?

Installing a patio flush to the ground can cost much less than a deck. At about $5 a square foot, concrete is usually the least expensive option. Patios are best suited for even ground and the cost of creating a level foundation is very high. Patios don't require regular maintenance.

How thick should concrete be for a patio?

We generally try to maintain a minimum thickness of any slab at 4 inches, if the patio will have heavy features added on it, you may want to thicken it to 6 or even 8 inches, at least under the area where the feature will be added.

How do you pour a cement patio?

To pour a concrete patio, start by roping off the patio area. Then, dig out the top layer of ground, and replace it with a layer of gravel. Next, make a form around your patio out of 2x4s to hold the concrete in place. Once the form is ready, mix the concrete and pour it all at once to avoid it splitting into slabs.

Is a deck or patio cheaper?

In short, patios are usually cheaper than decks.

For instance, since a patio is placed directly on the ground, you'll want to choose a space that is level. Patios may not be the best choice for uneven ground because the cost to create a level foundation can double or triple the cost of the actual addition.

How much does it cost to pour a 20×30 slab?

Typical sizes for concrete slabs are 12×12, 20×30, 30×50 and 40×60, but may differ according to your project's specific needs. On average, the material alone costs anywhere between $5.38 to $6.19 per square foot.

How do you lay pavers on a concrete patio?

Lay the field pavers over concrete as you would on any paver patio. Scrape away the excess sand and cut off the excess landscape fabric with a utility knife. Glue down the last border patio blocks. Let the glue dry for a few hours before you tamp the field pavers and sweep sand across the patio to fill the joints.

How much is a 24×24 garage?

The cost for a 24×24 Two Car Garage ranges from around $13,500 for a Standard Garage with SmartSiding to around $30,900 for a Legacy Two Story Detached Garage with clapboard siding.

How much is a stone patio?

The average cost of installing a natural stone patio is closer to $13.93 per square foot. This means that a 100sf natural stone patio would cost you between $2,348 and $4,938, on average.

How many bags of concrete do I need for a 10×10 slab?

Using a Concrete Calculator

You'll also get the number of 40-pound, 60-pound, or 80-pound bags of concrete are needed for the project. For example, a 10′ x 10′ slab that is 4″ thick will need an estimated 1.23 yards3 or 75 60lb bags of concrete and will cost roughly $140.

How many square feet are in a cubic yard?

In other words, one cubic yard = 27 cubic feet. Since there are 27 cubic feet in a cubic yard, an overall volume measurement that is made in cubic feet can be translated into cubic yards simply by dividing the cubic ft. measurement by 27.

How much is a bag of cement?

A bag of cement, portland cement, 94 pound in the USA, less in Canada, used with sand, rock and water to make concrete runs right at $10 around here. Prices vary of course.

How many 80lb bags of concrete are in a yard?

How many 80 lb bags of concrete do I need for 1 yard? The finished volume of an 80# bag of Sacrete or Quikrete (pre-mixed cement, sand and gravel) is 0.6 cubic foot (stated on the bag). There are 27 cubic feet in a cubic yard. Dividing 27 cubic feet by the volume of the bag will give you the number of bags you need.

Can you pour concrete over grass?

Cheap and versatile and easy to pour, concrete will last you years down the road. You can pour it just about everywhere—including on the grass. Although it takes a little work, pour concrete over grass to create that walkway you always wanted or that mowing preventative you could previously only dream about.

What is the cost of ready mix concrete?

According to the NRMCA – Ready Mixed Concrete Industry Data Survey, the average cost of concrete in 2016 was $108.22 per cubic yard, or $216.44 for the 2 cubic yards needed for the 10×10 patio project listed above.