To evaluate and identify a concrete crack problem, a structural engineer will charge you an average cost of $300 to $800. To repair major concrete cracks, a professional contractor will charge you about $250-$ 500.

People also ask, how much does it cost to fix a cracked driveway?

RELATED: How to Repair Driveway Cracks If you plan to do driveway patching yourself, expect to pay about $3 to $5 per square foot, about half the cost of hiring a contractor for driveway repair. You'll eventually have to replace concrete and asphalt driveways with deep holes, numerous holes or large cracks.

how much does it cost to repair a crack in a pool? If you find that there's a crack on the beam of the pool, according to, it will cost $65 per linear foot to repair and can be extensive as the whole pool needs to be repaired. Based on this example, if the entire perimeter of the pool needs to be repaired, it will cost around $4680.

Correspondingly, how much does it cost to repair concrete?

Just regrouting tile will run between $7 and $18 per square foot. Concrete slab repairs alone costs anywhere from $50 for small cracks up to about $500-$800 on average for mudjacking. Most repairs run about $9 per square foot.

Can a cracked driveway be repaired?

Cracks can usually be filled and repaired if the rest of the driveway is in good shape and it was installed properly in the first place. It's a good idea to wear rubber gloves when handling concrete fillers, mixers and resurfacers.

Related Question Answers

Does concrete resurfacing last?

Thanks to its advanced bonding properties, concrete resurfacing can last for quite a while. A properly resurfaced floor can last from 8-15 years.

Is it OK to pave over an existing driveway?

An overlay or resurface can be used on an asphalt driveway, parking lot, or road way. A paving surface can be deteriorated but still maintain structural integrity in which an asphalt overlay is the proper solution. An existing asphalt surface is the best base for new asphalt.

Can concrete be resurfaced?

As long as your walkway isn't cracked all the way through, you can coat the slab with a concrete resurfacer, a no-shrink blend of Portland cement, sand, and polymer additives that fills divots and makes a uniform finish. Resurfacing takes most of a day, but your walkway will be back in pristine shape once you're done.

Do it yourself repair concrete?

concrete sealers & repair
  1. Step 1: Using a Chisel, Make the Crack Wider at the Bottom than the Top.
  2. Step 2: Clean Out the Debris with a Stiff Fiber or Wire Brush.
  3. Step 3: Fill the Crack with Patching Mix (also know as Vinyl Concrete)
  4. Step 4: Address Any Pop-Outs.
  5. Step 5: Wet the Surface and Apply a Concrete Bonding Agent.

How do you repair an uneven concrete driveway?

How to Fix Uneven Concrete Driveways
  1. Surface Preparation. To bond effectively, an overlay needs a clean surface.
  2. Crack Repair. Larger cracks need a bit more attention than smaller ones, but you need to repair all of them before pouring the overlay.
  3. Setting Up Forms.
  4. Pour the Overlay.
  5. Considerations.

How long does it take to resurface a driveway?

Most of the time, however, you can expect the new surface to be ready for foot traffic in about six hours. And in 24 hours, you can pull your car in and park in the driveway again—that very same driveway that was tired- and worn-looking yesterday but, thanks to QUIKRETE® Concrete Resurfacer , appears brand-new today.

When should I resurface my driveway?

When to Replace Your Driveway

While resurfacing is a great option for your driveway, it's not always the best measure. After about 15 years your driveway will naturally lose its structural value. If your driveway is this old, our experts recommend completely replacing the asphalt.

Is foundation repair covered by insurance?

So while your insurance provider might cover foundation repair costs in those specific instances, they will not do so for damage caused by general soil compaction and expansion. However, as a general rule, your home insurance won't help cover general foundation repair.

How do you fix spalling concrete?

Level spalled areas and pits with QUIKRETE® Concrete Resurfacer in trowelable consistency. Use approximately one part water to 7 parts QUIKRETE® Concrete Resurfacer. Allow the repairs to harden before resurfacing the entire area.

Can you resurface cracked concrete?

As long as the rest of your driveway is sound (no heaving, sinking, or crumbling), you can replace those tiny cracks with a smooth concrete surface by applying a high-quality resurfacing product, such as Quikrete's Concrete Resurfacer.

How do you replace a section of a sidewalk?

Separate the section of broken slab by cutting each of the control-joint lines at the adjacent sections of the sidewalk with a jackhammer that's fitted with a 3-inch-wide cutting bit. Cut the main portion of the broken section into manageable size pieces. Remove the broken concrete.

How much does it cost to fill a foundation crack?

Foundation Repair Cost

Most homeowners will pay around $4,275 to repair foundation issues. Major repairs involving hydraulic piers can cost $10,000 or more, and minor cracks cost as low as $500. The typical homeowner pays between $1,897 and $6,681.

How do you fix a collapsed driveway?

Cut a piece of plywood slightly wider than the trench. Lay it over the patch material and cover it with 2x4s. Then drive over it several times with your vehicle until the patch is level with the garage floor. Cold patch works only when it's compacted and “keyed” into at least two vertical surfaces.

How long will concrete patio last?

If properly maintained, both surface types can last upwards of 30 years. However, the sealant application is far simpler for concrete patios when compared with wooden decks.

Can I resurface my pool myself?

HydroBOND® is the perfect product for the do-it-yourself pool repair project. This easy to use, roll on plaster coating comes with a convenient kit so all you need to do is drain your pool, prep your existing surface, mix up a batch, and roll on the HydroBOND®.

How do you detect a pool leak?

Pool Leak Detection: Bucket Method
  1. Place and Fill The Bucket. Place the empty 5-gallon bucket in the water on the second step of your pool.
  2. Turn Off The Pump.
  3. Check The Results.
  4. Repeat The Test.
  5. Check The New Results.
  6. Check The Ground and Walls Around The Pool For Wetness.
  7. Use Pool Leak Detection Dye To Pinpoint The Leak.

What is the best pool resurfacing material?

Choosing the Best Material for Pool Resurfacing
  • Plaster. Plaster is the most common pool resurfacing material because it is the cheapest.
  • Pebble. This resurfacing material is actually a mixture of rock pebbles and plaster, although pebbles cover most of the surface.
  • Concrete. If you favor durability over aesthetics, then concrete is a good material for resurfacing.

How much does a pool remodel cost?

Pool renovation cost is, unsurprisingly, all over the map. Depending on the extent of the improvements or adjustments, average cost can fall anywhere from $4,000 to $15,000.

How often should a pool be resurfaced?

You should do it proactively, and never wait for cracks or damage to show up. The exact frequency depends on the type of surface your pool has. If you have a cement/plaster pool you will need to resurface it every 3-7 years. A fiberglass pool is far more durable and can go 15-30 years between resurfacing.