Most units fall between $400 and $4,000 when including basic installation prices — though costs can run much higher. Depending on the type of fireplace you choose, the total cost of installation can reach anywhere from $2,300-$10,000 at the high end.
How much does it cost to replace gas lines in a house? cost to run natural gas line from street to house.


How much does it cost to replace existing gas fireplace?

Average Cost to Install a Fireplace
National average cost$4,000
Average range$2,650-$5,800
Minimum Cost$600
Maximum Cost$10,000
How much does it cost to replace a fireplace?

Expect to pay $1,000 to $3,000 to replace a fireplace. Your new fireplace might need work on the gas line or ventilation. Installing or repairing gas pipes costs another $1,000 to $2,000 or more.

Is running a gas fireplace expensive?

Gas fireplace efficiency includes easy maintenance, so you have no ashes or soot in the chimney with a gas fireplace. Natural gas is a fairly inexpensive form of energy, so a gas fireplace is inexpensive to run. Gas fireplaces cost 17-19 cents an hour to run, or about $60 annually, Electric Fireplaces Direct says.

Do plumbers fix gas fireplaces?

Yes, plumbers can help you with anything related to propane or gas. They may specialize in drains or anything related to water, but they often are both qualified and experienced enough to install and repair gas fireplaces professionally.

How much does a ventless gas fireplace cost?

A vented gas fireplace costs between $3,500 and $8,000 to purchase and have installed, depending on the amount of carpentry required to run the ductwork. By contrast, a ventless fireplace costs between $1,000 and $5,000.

Do I need a chimney for a gas fireplace?

Ventless fireplaces fueled by gas or propane rely on indoor air for combustion, and they exhaust a low level of their combustion gases into the room in which they’re located. A chimney or flue isn’t necessary. … In fact, ventless fireplaces generally are just for aesthetics and supplemental space heating.

Is it OK to run gas fireplace all day?

You can run a vented gas fireplace all day with little concern for anything other than gas usage.

Are gas fireplaces worth?

A gas fireplace offers a range of benefits over burning wood in your home, including the ability to instantly turn on, control and turn of the heat from the fire. The advantages of having gas fireplace can outweigh the disadvantages in many scenarios, making a gas fireplace a worthwhile investment for your home.

Do gas fireplaces use a lot of gas?

In short: Gas fireplaces are quite inexpensive to run. This is primarily due to the low cost of natural gas and propane. On average, 100,000 BTU worth of heat costs $1.09 if you use natural gas and $3.87 if you use electricity.

Why does my gas fireplace keeps going out?

If you get dust in the pilot assembly and the pilot needs to be cleaned out, it produces a “lazy” flame, which will be disturbed by the draught of the main burners. The flame lifts away from the thermocouple and causes the temperature on the tip of the thermocouple to drop. This, in turn, makes the gas valve shut off.

Why is my gas fireplace not lighting?

If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple. … The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.

How long should gas fireplace logs last?

Type of gas logs: A well maintained vented log set with ceramic logs will last a very long time, in some cases 10 or more years. A well maintained ventless log set with ceramic logs can also last a long time, but, if heavily used, will begin to wear in 3-5 years.

Which is better vented or ventless gas fireplace?

Ventless fireplaces are more energy efficient than vented fireplaces because no heat escapes up the flue, so you’ll save money on gas utility bills. A vented gas fireplace uses more gas to create the same level of warmth because some of its heat escapes through the flue.

How do you modernize a gas fireplace?

  1. Blue, green, red, and yellow fire glass.
  2. Charred wood style ceramic fiber logs set.
  3. Birch and oak style ceramic fiber logs set.
  4. Colored fire stones.
  5. Geometric shapes.
What is the difference between a gas fireplace and a gas insert?

A gas insert is installed within an existing masonry, wood burning fireplace. A gas insert is smaller than a gas fireplace to allow it to fit inside of the opening of an existing wood burning fireplace. … A gas insert can get much hotter on the outside (no, not that hot) than a gas fireplace.

Can a gas fireplace be added to an existing home?

Direct vent gas fireplaces can be installed almost anywhere in in a home where natural gas or liquid propane is available. Installation is flexible due to zero clearance construction, which requires minimal space between the fireplace and wallboard or wood (combustible materials).

Do gas fireplaces need electricity?

Gas fireplaces are a form of fireplace that traditionally didn’t typically need a source of electricity in order to work. … Turning this control through the spark ignition position to the pilot light position allows the pilot light to be started, all without the need for a source of electricity from the house.

What is the most realistic gas fireplace?

Peterson Real Fyre Gas Logs are the most realistic gas logs because they are meticulously hand-crafted to resemble natural wood and carefully designed and arranged to produce a flame that looks just like a real wood fire.

Is it OK to leave pilot light on gas fireplace?

We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace’s pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.

Is it cheaper to run furnace or gas fireplace?

Operating a furnace for one hour at 75,000 -100,000 Btu cost a homeowner $1.12 – $1.49 based on last month’s national average natural gas rate. By comparison, a natural gas fireplace running at 30,000 Btu per hour cost only 45 cents.

Should I turn off the pilot light on my gas fireplace in the summer?

Your Utility Bill Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill.

What are the pros and cons of a gas fireplace?

  • Cheaper than electric fireplaces. Not only are electric ones purely made for decoration, but also you’re paying extra for only a simulation of a fire, i.e. there’s no heat to the flame. …
  • Fewer safety risks. …
  • Easier to hire a professional for. …
  • Convenient to use. …
  • Cleaner air.
Will a gas fireplace save money?

Gas fireplaces can reduce your yearly heating costs. … Gas fireplaces can also help you save on heating costs by providing warmth during unpredictable or “in-between” weather when it’s not cold enough for the central heat, but you still need some warmth. 3. New gas fireplaces are incredibly efficient.

Are gas fireplaces good for resale?

There are several polls to debate wood vs gas fireplace resale value. 54% of real estate agents surveyed by Angie’s List said a gas burning fireplace increase home values most. … If you’re selling your home, either consider a fireplace remodel or install a new fireplace in a common room to sell faster.

How much does it cost to run a pilot light on a gas fireplace?

A pilot light is a small flame that is kept lit to provide a catalyst for the main burner to be turned on when needed. The average fuel consumption of your standing Pilot light is: Natural gas is $0.60 a day = $219 a year.

Why are my gas fireplace logs turning black?

Soot buildup is commonly caused by clogged burner ports and improperly positioned fire-logs. A fire-log that’s out of position can obstruct the flame path that ensures the clean-burning of gas. This contributes to soot formation on the fireplace. Another primary cause of soot is clogged gas burner ports.

Will gas leak if pilot light goes out?

If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.

Can you manually light a gas fireplace?

Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights. Depending on how long it’s been since the gas fireplace was last used, ignition may take multiple attempts.

Why does it take so long for my gas fireplace to turn on?

Usually the problem is solved by having the fireplace cleaned and serviced, which takes about an hour of time. Look for a competent fireplace repairman to do this job for you. Most gas fireplaces do not have a thermocouple, they have a pilot generator which developed the voltage to turn the main burner on.

Can you vacuum a gas fireplace?

Get Free of Debris: Use the hose attachment on your vacuum to clean the interior of your fireplace. Clear out cobwebs and any visible, lingering dirt. If your fireplace has lava rocks, use the attachment to clean around them individually.

How do I know when to replace gas logs?

If that’s the case with yours, depending on usage, they can begin to fade in appearance over tine, and likely need to be replaced every 2-3 years. However, most gas logs these days are ceramic, and they tend to last a big longer as they are extremely durable and resistant to extremely hot temperatures.

How often should gas fireplaces be serviced?

Most manufactures require annual service and inspection of your gas fireplace. We recommend every year for regular users and no more than 3 years for fireplaces that are rarely used.

Does a gas fireplace have to be on an exterior wall?

Gas fireplaces do not need to be installed on an outside wall. Modern gas fireplaces can be installed anywhere in the home, whether it be on an interior wall or an exterior wall. This is because gas fireplaces are usually well insulated.

What does a vented gas fireplace look like?

But only vented systems can really replicate the look of real wood flames. A vented fireplace has attractive yellow and orange flames that lick upward around the sides of the ceramic logs. An unvented fireplace, by contrast, has much less striking flames. These flames tend to be smaller and bluer.

Can you use a gas fireplace without logs?

You can use a gas fireplace without logs because the heat source is the burner connected to your gas line. Don’t use wood in your gas fireplace, as they weren’t built for wood to be their fuel source. Instead, use a ceramic log in your fireplace for additional reflective heat.