Short Answer: Many O'Reilly Auto Parts locations offer rotor turning, but this service is not available everywhere. Where available, rotor turning costs about $10 to $15 per rotor and takes about 30 minutes to one hour.

Consequently, does O'Reilly resurface brake rotors?

Drum & Rotor Resurfacing Most O'Reilly Auto Parts locations can resurface your vehicle's drums and rotors if they measure within specs and aren't showing signs of extreme wear. Surface finish is crucial to proper vehicle braking and pad life and should always be part of a complete brake job.

Also, does AutoZone resurface brake rotors? No, AutoZone doesn't turn/resurface rotors, replace rotors, turn or replace brake drums, or replace brake pads or shoes. However, AutoZone does sell the parts required to complete these brake service jobs yourself. Nationwide service chains that turn rotors and more include Jiffy Lube and O'Reilly Auto Parts.

Hereof, how much does it cost to resurface rotors?

Know what price you should pay to get your vehicle fixed. The average cost for a brake pad replacement, resurface rotors is between $235 and $329. Labor costs are estimated between $158 and $200 while parts are priced between $77 and $129. Estimate does not include taxes and fees.

How often should rotors be resurfaced?

Some manufacturers even recommend that rotors not be resurfaced at all. Instead, they recommend that, as long as the rotor is in good condition, the pads should be replaced. Once the rotors show signs of wear, out they go. Sometimes rotors become too worn out or damaged to replace.

Related Question Answers

How do you resurface brake rotors?

How to Resurface Brake Rotors
  1. Use a lug wrench to loosen the lug bolts that hold the wheels onto the vehicle.
  2. Spray brake cleaner on the brake components (rotor, caliper and nearby parts) and wipe everything down with a clean rag.
  3. Slide the caliper off the rotor.
  4. Remove the caliper bracket if your car uses one.

How do you know when to change your rotors?

When you drive, the car will tell you if the brakes or brake rotors are in need of replacing. Squealing or squeaking is usually an excellent indication. If you hear grinding, head straight to the mechanic, because this is a definite sign that you have brake wear on your pads and they are worn to the metal.

How do I know when my rotors are bad?

One of the first symptoms commonly associated with bad brake rotors is noise. If the rotors are warped (meaning not perfectly flat) or severely worn, they may produce squealing or squeaking sounds. Usually, warped rotors will produce a squeak, while severely worn rotors will produce a scraping sound.

How do u clean rotors?

Spray the rotor with your can of brake cleaner, per the can's instructions. If using soap and water, spray or dip a rag into the solution and wipe the entire rotor down. Some brake cleaners simply require a good wipe down after using the spray.

How do you remove rust from rotors?

Use Brake Cleaner to Remove Rust From the Rotors

Put down a tray to catch any runoff, then spray the rotor with brake cleaner. Let the rotor dry, then wipe it with a clean rag (no oil on the rag). If some rust remains, apply more brake cleaner and work the surface with steel wool or a wire brush.

Can you change just one rotor?

Yes , you can install just one disk/rotor without the other. BUT the Brake pads should ALWAYS be replaced on BOTH sides, AT THE SAME TIME. If you only replace pads on that one side with the new rotor, then you will run into the same problem later on, but on the other side.

What is brake rotor resurfacing?

Resurfacing is a process where a small amount of the brake disc's material is removed with a lathe in order to remove corrosion and brake pad deposits. Some brake shops will lightly resurface rotors every time they replace brake pads to remove any pad materials that might be left behind.

Is it cheaper to resurface or replace rotors?

Replacing Brake Rotors

In some cases, replacing a brake rotor is cheaper than getting it resurfaced, especially if you are a DIY mechanic. Resurfacing at home can cost you a lot of money, so you are better off making a replacement rather than resurfacing. To your good luck, new rotors are very easy to install.

Are rotor resurfacing worth it?

Resurfacing a rotor obviously removes metal, making the rotor thinner and reducing its remaining service life. Because of this, some consumers as well as some vehicle manufacturers say rotors should not be resurfaced every time the pads are replaced (unless the rotors are badly grooved or uneven).

How long do rotors last on average?

The rotors on a vehicle can last anywhere from 30,000 to 70,000 miles and sometimes more. A licensed mechanic, such as one from YourMechanic, can evaluate the rotors and advise you on their status; they may not need to be changed as often as the brake pads. Like brake pads, they should be replaced in pairs.

Will turning rotors fix warp?

You have two choices: replace them, or machine them. Warped rotors, if they're thick enough, can be turned in a machining process that uses a lathe to smooth the rotor. Unfortunately, since it's a stressed metal, your rotor can return to its old, warped shape.

Does NAPA Auto Parts turn rotors?

Depending on your local NAPA Auto Parts store or NAPA AutoCare, these machines may still be available for turning customer's parts. Instead of buying a new rotor, we were able to save it by turning. Most rotors and flywheels have minimum thickness measurements cast into the hub.

Does Firestone turn rotors?

If you're wondering when to replace brake rotors, come into your nearby Firestone Complete Auto Care store. Our Tire and Auto Service Professionals will perform a free brake check and inspect the health of your brake rotors. If brake rotors have significant wear or are warped, they can be resurfaced or replaced.

What happens if rotors are not replaced?

If the rotors have never been resurfaced, you don't have any deep grooves, and your brakes aren't shuddering when you stop, then it's completely safe to install new pads. The worst that is likely to happen even with worn rotors, is the new pads wear unevenly and don't last.

Is it better to turn rotors or replace?

Replacing Brake Rotors. Buying new will most likely exceed the cost of simply turning the rotors, but an advantage to new rotors is that their higher thickness serves to generally slow the heat absorption during braking which can make brakes slightly less prone to fade if you are heavy on the pedal for extended time.

How much does it cost to get your rotors resurfaced?

Know what price you should pay to get your vehicle fixed.

The average cost for a brake pad replacement, resurface rotors is between $235 and $329. Labor costs are estimated between $158 and $200 while parts are priced between $77 and $129. Estimate does not include taxes and fees.