Pillowcase Supplies:

Fabric (1/2 yd should work, mine was 15.75″ x 43″), prewashed and ironed. Thread and sewing machine (you could also sew by hand) Scissors. The pillow itself, of course, as a base.

Beside this, what size is a toddler pillow case?

Little Sleepy Head Toddler Pillowcase – Blue Marble, 13 x 18 Inch.

One may also ask, how do you make a pillowcase? To make a pillowcase, start by cutting out a piece of fabric that's 45 inches by 36 inches. Then, fold the fabric in half lengthwise so the back of the fabric is facing out. Next, use a sewing machine or a threaded needle to stitch the long side and one of the short sides.

Also know, how much fabric do I need to make a pillowcase?

Allowing Fabric Allowances A finished standard pillowcase should measure about 22.5 inches by 31.5 inches, allowing for fill depth, seaming and an approximate 4-inch hem. One yard of 45-inch-wide fabric should be enough to make one standard case, if the material is preshrunk.

Do toddlers need special pillows?

The good news: Blankets, pillows and stuffed animals no longer pose the risk that they did when your child was a baby. Now, it's fine for your toddler to sleep with a thin blanket and a small pillow — but make sure the pillow isn't big enough for him to use as a makeshift step stool to climb out of his crib.

Related Question Answers

What age should a child get a pillow?

It's a good idea to wait until your baby is ready to transition to a toddler bed, which usually happens between 18 months and 3 and a half years old. When the time does come to give your little one a pillow, avoid the fluffy adult-sized models, instead go for a small, firm toddler pillow.

How do you make a pillow for kids?

  1. For each pillow cut out two square pieces of muslin measuring 12″ x 12″ each.
  2. Have each child draw a shape, creature or animal on one piece of muslin.
  3. Overlay the reverse of your child's drawing over another square of muslin fabric.
  4. Assist your child to sew around the shape, leaving a 1/4″ seam allowance.

Can my two year old have a pillow?

For toddlers who are developing normally, a pillow can usually be introduced around the age of 2.” Of course, even if your child has hit the 2year mark, it doesn't necessarily mean he needs a pillow just yet. “If your toddler is resting his head on a blanket or stuffed toy, he's probably ready for a pillow,” she says.

How do you measure a pillowcase?

Use a firm (ie, a carpenter's) tape measure, rather than a flexible (ie, a tailor's) measuring tape for the most accurate results. DO NOT measure the pillow diagonally. DO NOT measure the pillow across its center. Keep in mind that when ordering, you will need to round up or round down to the nearest ½ inch.

What size is a travel pillowcase?

For a travel-sized pillowcase made to fit a 12 by 16 inch pillow, you'll need: 1/2 yard cotton fabric for the main body of the pillowcase. 1/3 yard minky fabric for the edge (Because Minky is 60 inches wide, you'll have enough length for 2 pillowcases.)

How do I make a baby pillow?

Part 2 Sewing the Pillow
  1. Pin the 2 U-shapes together with the right sides facing in.
  2. Sew the pillow, but leave a 5 to 6 in (13 to 15 cm) gap for turning.
  3. Cut notches into the curved edges of the seams.
  4. Turn the pillow inside-out through the gap and press the seams with an iron.

How do you make a burrito pillowcase?

  1. Layer Your Materials. Place your cuff fabric on your work station, right side up.
  2. Roll Up the Main Fabric.
  3. Fold Up the Cuff Fabric.
  4. Sew the Raw Edges.
  5. Unroll the Burrito and Press.
  6. Trim to Size.
  7. Finish the Pillowcase.
  8. Trap the Raw Edges.

How do you make a Minky pillowcase?

Place the folded minky strip on the right edge of the vertical rectangle with the edges all of the minky and the cotton lined up and pin every 1/2″ – 1″ apart. Next sew a zig zag seam along the pinned minky and cotton edges making sure to sew with the minky on the bottom.

What is the coolest fabric for pillow cases?

Best Cool Pillowcase Fabric Choices: A Breathable Night's Sleep
  • White Classic Cotton Pillowcases.
  • SHEEX Breezy Cooling Pillowcases.
  • Snuggle Pedic Zipper Bamboo Pillow Cover.
  • WonderHome Cooling Tencel + Bamboo Rayon, Silky Soft Satin Pillowcase.
  • Great Bay Home Extra Soft Heather Jersey Knit (T Shirt) Pillowcases.

How many yards of fabric do I need for a 22×22 pillow?

Sewing For Dummies, 3rd Edition
Dimensions (Length by Width)Amount of Fabric Needed for 1 Pillow Cover (Using 54-inch Wide Fabric with No Pattern Matching)
16 x 16 inches1/2 yard
18 x 18 inches5/8 yard
20 x 20 inches3/4 yard
30 x 30 inches1 yard

How much is a yard of fabric?

Measuring a Yard of Fabric

Fabrics come in various widths, so a yard of the fabric refers to the length of material only. The material is unrolled from the bolt, and you should measure 36 inches or 3 feet. That's precisely how much a yard of fabric is.

How do you make queen size pillowcases?

  1. Purchase 1 1/4 yards of 44-inch fabric for each queen-size pillowcase you want to make.
  2. Wash and dry the fabric to remove filler and to pre-shrink the fabric.
  3. Cut one 40-inch length for one pillowcase and use the width of the fabric.
  4. Trim the selvage edge with scissors, removing as little fabric as possible.