Place the Wax Ring and Toilet

If the toilet's floor flange height is slightly less than a 1/4 inch above the flooring, you can use an extra-thick wax ring to make up the difference. Do not be tempted to stack up two wax rings because this setup tends to leak.

In this manner, do you need two wax rings on a toilet?

You Don't Have to Use a Double Wax Ring You can use the extra-thick version of one of these to bridge the extra space between the toilet and the flange. Once you install this, a single standard wax ring should be all you need to seal the toilet to the waste opening.

Furthermore, do you need to caulk around a toilet? Turns out, caulking your toilet to the floor is actually smart. These clients say that caulking around the base of the toilet would trap water from a leaking toilet, causing damage below and around the toilet since it has no place to leak onto the floor.

Also know, are toilet wax rings all the same size?

Wax rings come in standard sizes, but some are double thickness. If the toilet flange under your toilet is below the flooring level, you will need to get a double thick wax ring. If the flange is perfectly level with the flooring surface, you will then only need to purchase a standard wax ring.

How often should you change the wax ring on a toilet?

The wax keeps water from leaking as it passes from the toilet to the drain pipe. It also seals against foul sewer gas odors. A wax seal will often last the life of the toilet, 20 or 30 years, without needing to be changed. There are times, though, when the wax ring will need to be replaced.

Related Question Answers

Can plunging a toilet damage the wax ring?

Plunging always works, or Plunging can‘t harm the toilet.

Once again, absolutely false! When your stoppage is not in the pee trap of the toilet but in the pipe just below the toilet, you are usually damaging the wax ring when you place the plunger in the bottom of the toilet bowl and start pushing.

What size wax ring do I need?

The wax ring should be compressed around 1/2 to 3/4 it's initial height once installed. If it will compress less, you need a taller ring. If it will compress more, consider getting one with a flange to limit wax extrusion into the drainage path. I always purchase the extra-thick ring with the flange.

Why do toilet wax rings fail?

Leaks. Wax rings also provide a watertight seal that forces water and waste from the toilet directly into the drain. If water accumulates or puddles around the base of the toilet, the wax ring may have failed. Any leaks can rot the floor or subfloor, so address them quickly.

How do you reinstall a toilet after tiling?

Follow the directions provided below to set the toilet ring into the flange after tiling the floor.
  1. Step 1 – Seal the Drain Hole Before You Start Work.
  2. Step 2 – Adjust the Toilet Flange Height to the New Floor.
  3. Step 3 – Remove the Old Toilet Flange Bolts.
  4. Step 4 – Attach the Toilet Ring to the Toilet Bowl Base.

How long does it take a professional to install a toilet?

two hours

How do I know if my wax ring is leaking?

Bad Toilet Wax Ring Symptoms

The first clue that a wax ring is failing is often the presence of water on the floor around the base of the toilet due to the toilet ring seal leaking. If the toilet installer caulked around the toilet, though, water might not be visible on the floor.

Do Waxless toilet rings work?

All of the wax style rings, waxless rings, or gasket seals will work if installed properly. Some of the new waxless style toilet seals have a longer seal or can be stacked which can make it easy for anyone to set a toilet without leaks.

How much does it cost for a plumber to replace a wax ring?

Replacing a wax ring, also referred to as a wax seal, will run between $50 and $200, including labor and materials. While the ring itself is inexpensive at $2 to $10, replacing it takes time and expertise. The closest flange may also need replacing, which can increase total project price.

Why does my toilet keep leaking at the base?

One reason the toilet could be leaking at the base is that the t-bolts, which fasten the toilet to the floor, need to be tightened. Then reset the toilet, tighten the t-bolts and replace the caps. Reconnect the water supply line and turn on the valve. Test the toilet for leaks.

Can toilet flange be lower than floor?

If a flange is more than 1/4 inch below the floor, buy some 1/4 or 1/2—inch thick PVC flange extenders and fit them around the flange to bring it up even with or slightly above the floor level. Standard wax rings work for closet flanges that are even with the finished floor or up to 1/2 inch above it.

Should toilet flange sit on top of tile?

The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.

How tight should toilet bolts be?

The toilet bolts should not be overtightened, but they should be tight. If you hear the sound of metal on porcelain, stop tightening. But if you still feel the bolts tightening against the wax ring, keep going.

Do you have to replace the wax ring when you remove a toilet?

Whenever you remove a toilet for any reason, replace the wax ring seal between the toilet and the toilet anchor flange (sometimes called a closet flange) attached to the floor. Once you drain the toilet tank and unhook the water supply, it's a good time to replace the flush valve.

What is a reinforced wax ring?

Extra Thick & Reinforced to retain shape. The “reinforcedwax ensures that the wax does not break free from itself or breaks away from the surfaces it is binding to or when the wax is being applied to the toilet and flange. This reinforcement allows the wax to stay intact and make a good seal.

Can you use toilet right after installation?

Yes, it's wax, and never “sets”. Just be sure to put weight on it before the screws so that it's seated all the way and the wax spreads out. Then go ahead and use it right away. Yes, you can use it immediately but I was advised by the plumber who installed mine not to wash the floor for 24 hours.

How do I know if my wax seal on my toilet is bad?

Determine if the Wax ring is possibly bad by inspecting the floor for water or a foul odor of sewer gas. Use food coloring. If are unsure of where water is coming from you can add food coloring to the toilet tank. If the floor's water is the same color, then you likely will need to install a new wax ring.

Can a toilet leak without you knowing?

Most people don't realize it, but a leaking toilet is the most common cause for a water bill that gets out of control. There are a number of signs that a toilet needs some repairs, but many toilets still leak without any obvious signs of trouble. If you have to jiggle the handle to make a toilet stop running.

Why should you caulk around a toilet?

If it is caulked, the thinking is that if the toilet flange leaks, you‘ll end up trapping water between the toilet base and the floor in an area that you can't access. Caulking around the base of the toilet prevents this from happening. Caulk helps to keep the toilet secured to the floor.