Your new PC3-12800 will work beautifully withyour mobo (At least they should). PC3-12800 is exactly thesame as DDR3-1600. The PC3 rating of DDR3modules is simply the DDR3 rating multiplied by 8(Effectively giving a good approximation of the highest possibledata transfer rate of that particular module).

Beside this, does pc3 mean ddr3?

DDR3 stands for Double Data Rate type three butdoes not imply a specific frequency or bus rate. ThePC3-xxxx designates the particular RAM's speed rating andmeans that the memory certified as able to run at that busspeed. So DDR3 RAM PC3-1333 runs at 1333 MHz whilethe PC3-1066 runs at 1066 MHz.

Also, what pc3 10700? The “official” name for DDR memory is based on itsbandwidth rather than clock speed. Today's DDR3-1333 has a peakbandwidth of 10666 MHz, which can be improperly rounded down andcalled PC3-10600, rounded up to be calledPC310700 or stated without rounding asPC3-10666 depending on the manufacturer'sdesires.

Simply so, is ddr3 compatible with ddr2?

DDR3 is not backwards compatible withDDR2. While both types of modules have similar numbers ofpins, the notches in the PCB are in different locations. In otherwords, a DDR3 module cannot be placed in a DDR2memory socket, and vice-versa.

Can ddr3 1333 Replace 1600?

Yes you can. But the 1600 will run at1333. Footnote: This is also the case if you choose to use1600MHz RAM on a motherboard that only handles 1333MHz – It'll runas fast as it's allowed to.

Related Question Answers

How do I know if my RAM is ddr3?

Check RAM Type

Open Task Manager and go to the Performance tab. Selectmemory from the column on the left, and look at the very top right.It will tell you how much RAM you have and what typeit is. In the screenshot below, you can see that the system isrunning DDR3.

What does pc3 10600 mean?

The clock speed of the RAM module is rated at twice themodules actual speed. For instance, I am running DDR3-1066, whichis 1066MHz. For instance, PC310600 means 10,600MB/s,divide this by 8 to get the DDR3 Specification, which would be10,600 divided by 8 = 1325 (always labeled 1333 on RAMcartridges).

What does the number after ddr3 mean?

DDR3. Stands for “Double Data Rate Type 3.”DDR3 RAM is similar to DDR2 RAM, but uses roughly 30% lesspower and can transfer data twice as fast. While DDR2 memory cantransfer data at up to 3200 MBps (megabytes per second),DDR3 memory supports maximum data transfer rates of 6400MBps.

When was ddr3 released?

4 GiB PC3-12800 ECC DDR3 DIMM
TypeSynchronous dynamic random-access memory (SDRAM)
Release date2007
PredecessorDDR2 SDRAM (2003)
SuccessorDDR4 SDRAM (2014)

Can ddr4 fit in ddr3?

No, it is not electrically nor electronicallycompatible. DDR4, for example, runs at 1.2V (volts) whileDDR3 runs at 1.5V (or 1.35V for DDR3L). A DDR3 RAMslot will provide that voltage. That's basically to protect youfrom trying to jam a DDR4 RAM into a DDR3 RAM slotand damage something.

What does pc3 12800 mean?

PC312800 means that the Peak TransferRate is 12800 MB/s. Same for the PC3-10666(PC3-10600) it means the Peak Transfer Rate is 10667MB/s.

What is the difference between pc3 and pc4 Memory?

You may have seen RAM referred to by two sets ofnumbers, like DDR3-1600 and PC3-12800. These both referenceand allude to the generation of the RAM and its transferspeed. The number after DDR/PC and before the hyphen refersto the generation: DDR2 is PC2, DDR3 is PC3, DDR4 isPC4.

What is pc4 RAM?

I believe “DDR4” refers to the memory chips themselveswhile “PC4” refers to the DIMM, the memory stick you pluginto the slot. For example, DDR4-3200 refers to a memory chip thatruns at 3200MT/s (megatransfers per second) while PC4-25600refers to a DIMM that transfers 25.6GB/s.

Which is faster ddr2 or ddr3?

DDR2 RAM provides 4 data transfers per cycle,while DDR3 increases the number to 8. Assuming a base clockspeed of 100Mhz, DDR RAM will provide 1600 MB/s of Bandwidth,DDR2 provides 3200 MB/s, and DDR3 provides 6400 MB/s.More is always better!

Can I use 1333MHz and 1600MHz RAM together?

You can, both sticks will run at1333MHz. As long as your motherboard supports more than 8gbof RAM, which most of them do.

How fast can ddr3 go?

Most popular DDR3 frequencies are DIMMs operating1600 MHz, 1333 MHz and 1066 MHz.

What is the fastest ddr3 RAM?

G.Skill reclaims world's fastest DDR3 memory title at4.4GHz
  • The regular speed of the RAM ‘YoungPro' used was 3,000MHz.
  • As mentioned above, the RAM used for this world record breakingmemory overclock was G.Skill TridentX DDR3-3000 (PC3-23400) whichG.Skill sells in 8GB and 16GB kits.

Can you mix 1600 and 1866 Ram?

Mixing ram either go bad or works no problem.Just make sure ram can run same timings, voltage andfrequency. You can probably take that 1866, reducethe clock to 1600 and run 9-9-9-24 CL9 for all 16gb, 1.5v.You can also try to overclock your current ram tomatch new 1866mhz, loosen the timings like 9-10-9-271.65v.

Can I mix 4gb and 8gb ddr3 RAM?

There are chips which are 4GB and 8GB, in dualchannel mode this will not work. But you would still get12GB total only a little slower. Sometimes you will have toswap the RAM slots since the detection has bugs. IE youcan either use the 4GB RAM or the 8GB RAM butnot both at the same time.

Can I mix 4gb and 2gb ddr3 RAM?

YES! you can install a 2gb and 4gbRAM chip together. Yes.But the two ram sticks have tohave run on the same frequencies and has to be of the same memorytype. For ex: A 2 GB ddr3 1100 Mhz ram will not workwith a 4 GB 1600 Mhz ram.

What does ddr3/1600 mean?

The next generation of DDR3 has arrived.DDR31600 memory has a module classification ofPC3-12800, which effectively means the peak data rate of themodule is 12.8GB/sec (see table). That's about a 17% improvement onmemory bandwidth over DDR3-1333.

Can I mix ram with different MHz?

None of this necessarily guarantees functioningRAM, of course—you may be greeted with the Blue Screenof Death if your DIMMs just don't like each other (or yourmotherboard doesn't like one of the DIMMs). Most of the time,though, your computer will run fine if you mixdifferent brands, sizes and speeds.

Does it matter what slots I put my ram in?

Normally, you fill Bank 1 first and then bank 2. If theRAM is mismatched then you want to Place matching pairstogether If all RAM is the same brand and size, then itdoes not matter. If you have 2 4GB RAM cardsand 1 8 GB Card then the two 4GB cards go in slots 0&1.And the single 8GB card goes in slot 2.