The ideal upper cabinet height is 54 inches above the floor. That is, the bottom edge of the upper cabinets should sit 54 inches off the ground.
What are cabinet face frames? face frame cabinet doors.

What is Cabinet elevation?

The ideal upper cabinet height is 54 inches above the floor. That is, the bottom edge of the upper cabinets should sit 54 inches off the ground.

What is the purpose of elevations?

The purpose of an elevation drawing is to show the finished appearance of a given side of the house and furnish vertical height dimensions. Four elevations are customarily drawn, one for each side of the house. The reference point for most elevations is the grade line.

What does elevations mean in construction?

“An elevation is an orthographic projection of an object or construction on a vertical picture plan parallel to one of its principal faces.” – Francis D.K. ChingArchitectural Graphics. In simpler terms, an elevation is a drawing which shows any particular side of a house.

What are millwork elevations?

Elevation. It’s a 2D picturing of looking at an object from the front. For instance, elevation drawing of the wall represents the simple straight look at it.

How high are lower kitchen cabinets?

Height:34.5 inches without countertop / 36 inches with countertop
Depth:12 to 24 Inches
Width:9 to 36 inches
How high should a cabinet be above a stove?

The standard height for a range hood is between 28 and 36 inches from the cooktop for a gas range and electric range. 28 inches is the minimum height. If the hood is any closer, it may become damaged. Any further than 36 inches and your hood won’t move air away from your cooktop efficiently.

What's the difference between section and elevation?

The difference between Interior Elevations and Sections is that Interior Elevations start at the finished floor elevation and stop at the ceiling. Interior Elevations show individual walls in specific rooms, whereas Sections cut through floors showing multiple rooms stacked on top of each other.

What does elevation mean in interior design?

An elevation sketch is an orthographic projection—a two-dimensional representation of a three-dimensional space. For interior design, it is a two-dimensional drawing of a wall (or series of walls) with varying degrees of detail.

What is the purpose of elevations on house or building plans?

An elevation is created to give an idea of what the finished product will look like and give the construction team the specifications from which to create the building. They show the structural and architectural details of a building.

What is elevation design meaning?

Definition of an Elevation – Architectural Terminology: A 2-dimensional representation of a building form as seen from the vertical orthographic plane. In simple words a 3d object is represented in a series of 2d drawings as seen from different vertical planes.

How do you read elevations on plans?

Elevations show the vertical layout of the building, and there is usually one elevation drawing for each face of the building. An exterior elevation shows you what a house like if you’re standing front, next to, or behind it. An interior elevation shows the same thing, only from inside the house.

How do you read a cabinet layout?

For instance, on a kitchen floor plan, you will typically see a base cabinet labeled SB36, B30, 3DB24, and W2442. What the nomenclature above means: SB36 = SB stands for Sink Base and 36 means the cabinet is 36” wide. B30 = B stands for Base and 30 means the cabinet is 30” wide.

Are countertops considered millwork?

Millwork or millwork design refers to finished building products or woodwork produced in a mill such as doors, crown molding, wall paneling, display counters, custom kitchen cabinet drafting, etc. However, the elements that are integral parts of the building itself, such as ceiling, flooring, or siding etc.

What is the normal height of kitchen cabinets?

Height, without countertop34 1/2 inches
Height, with countertop35 to 36 inches
Depth (front to wall), without countertop24 inches
Depth, with countertop25 to 26 inches
Standard widths12, 18, 24, 30, 33, 36, 48 inches
What is the standard height between upper and lower cabinets?

The standard distance between the top of a kitchen counter and the bottom of the wall cabinets above it is 18 inches. For the average person, this distance is the ideal balance between plenty of space to work on the countertop and the ability to reach all of the shelves in the cabinet.

What height should kitchen units be?

Base units start from 870mm but can reach 1000mm in height and what is perfect for one person is not necessarily right for another. On average, kitchen worktops are around 900mm high but if you want to find the most ergonomic level for you, there is one tried and tested method.

What is elevation section?

An Elevation drawing is drawn on a vertical plane showing a vertical depiction. A section drawing is also a vertical depiction, but one that cuts through space to show what lies within.

What are the four elevations?

Elevations are typically created from the four main faces of the building: front, rear, right, and left. These views are typically named north, south, east, and west referring to the general direction the building faces.

What is difference between projection and elevation?

is that projection is something which projects, protrudes, juts out, sticks out, or stands out while elevation is the act of raising from a lower place, condition, or quality to a higher; said of material things, persons, the mind, the voice, etc; as, the elevation of grain; elevation to a throne; elevation to …

How are elevations used in design?

As buildings are rarely simple rectangular shapes in plan, an elevation drawing is a first angle projection that shows all parts of the building as seen from a particular direction with the perspective flattened. … Simple elevation drawings might show: The outline of a building.

Does elevation include furniture?

“An elevation is a view from the side of an object when drawing interior elevations; this would represent one of the walls. This would include any windows or doors as well as any built-in furniture that is in direct contact with the wall.”

How do you label elevations?

The elevation marker is shown as a circle with an arrow pointing toward the elevation. Inside the circle, there is a reference number or letter referring to the elevation drawing number or letter, and underneath this, is the drawing sheet number where that elevation can be found.

What does elevation of property mean?

Front elevation refers to the side of the house which includes the entrance door, windows or front porch. This may be the side of the house that faces the road or has a front yard. … Elevation includes the front, back and sides of the building whether they are front facing or not.

How many exterior elevations are usually required for a home?

There are four exterior elevations that are usually required for a home. The front, the rear, and each side.

What are the main types of elevation?

Elevations depict how your home will look when viewed from specific angles. There are different types of elevation with respect to these specific angles. Front elevation, side elevations, rear elevations and split elevations are some types.

What does South elevation mean?

The top drawing is labeled the south elevation, meaning the elements and surfaces that are depicted are facing south; we are looking toward the north. The same reasoning applies to the bottom drawing, which is the other side of the building on the north.

What is a elevation view?

This is an elevation view. An elevation is a view from the side of an object, when drawing interior elevations, this would represent one of the walls. This would include any windows or doors as well as any built-in furniture that is in direct contact with the wall. This is a section view.

How do I identify my kitchen cabinets?

Cabinet brands that belong to the Kitchen Cabinet Manufacturers Association (KCMA) will have a sticker on the back side of the sink door or side wall of the cabinet. On the sticker there should be a code or the cabinetry name in the middle of the label.

What are the codes for kitchen cabinets?

Base cabinets have a similar format, but height and depth are always standardized at 34.5” tall and 24” deep. That means that all that’s needed for a standard base cabinet code is the width – a code of B15, then, will signal B for basement and 15 for 15” wide. For sink base cabinets, you’d see codes like SB15 or SB30.

How do you read kitchen cabinet sizes?

The standard depth of wall cabinets is 12″, so they do not include that in the item number or code. Most wall cabinets will have the following format: W2430 In this example, the W identifies that it is a wall cabinet, 24 indicates the width of 24″, and the 30 indicates a height of 30″.

What do millworkers do?

To understand the difference between millwork and casework, keep reading below: Millwork is any type of woodwork or building product that is produced in a mill. This could include anything from doors, molding, trim, flooring, wall paneling, crown moldings, etc.

Does millwork include cabinetry?

Millwork includes custom wood working pieces such as cabinets, restaurant seating, shelves, commercial storage, etc. Essentially, any work that is customized for a specific space. Otherwise, it would be considered furniture.

Are windows considered millwork?

“Millwork” refers to the stuff traditionally made in a mill. Items such as base trim, crown molding, interior doors, door frames, window casing, chair rails and wood paneling are all examples of millwork.