Haier – Combination Washer/Dryer Error Codes
Fault CodeDescription/Reason
E13Caused by buildup of lint.
E1Washer cannot drain the water within 4 minutes
E2Cannot lock the door after 20 seconds
E4After 8 min, the selected water level has not been reached.

Keeping this in consideration, what does e1 mean on washing machine?

When the Washing Machine is displaying E1 in the panel, it is indicating an error in the water supply. The appliance is not detecting that the unit is filling with water.

Also, what does e1 mean? The Meaning of E1 E1 means “Everyone”

Likewise, people ask, what does e2 mean on a Haier washing machine?

1. Door Lock error, door not shut correctly. 2.Door lock failure or bad connection. Solution: Shut the door fully. If the error code still exist, Please call for service.

How do I clear f9 code?

How to Remove the F9 Code From Maytag

  1. Hold on the “Start/Stop” button for 10 seconds. This will end the beeping.
  2. Open the oven door and check the door latch. If it wiggles, it needs to be tightened.
  3. Spray a little WD-40 onto a washcloth and scrub off any rust or debris on the latch.
  4. Press the oven door shut gently.
  5. Test the oven.

Related Question Answers

What is e1 error in Whirlpool washing machine?

If F8 E1 or LF (too long to fill) appears in display, it means the washer is taking too long to fill. It’s possible the drain hose extends more than 4.5″ (114 mm) into standpipe. Check plumbing for correct drain hose installation.

How do I fix e4 on my washing machine?

Having eliminated the E4 error on the Samsung washing machine, you can start the test mode. You must select the Rinse & Spin mode and run it without laundry in the drum. Wait for the cycle to finish. If during operation, the machine again issues the E4 error, it indicates an internal breakdown.

How do you reset the code on a Whirlpool washer?

How To Reset Whirlpool Cabrio Washer:
  1. Turn the washer off.
  2. Set the mode selector dial to NORMAL.
  3. Turn the dial counter clockwise ONE click (LEFT), clockwise THREE clicks (RIGHT), counter clockwise ONE click (LEFT) then clockwise ONE click (RIGHT).
  4. Now press the start button.

How do I reset my Samsung washing machine?

To reset your Samsung washing machine you need to simply disconnect the washing machine from power for 5 to 10 minutes. (Unplug the washer from the wall outlet or flip the breaker in the breaker box for the washing machine).

What does IE mean in Samsung washing machine?

An IE error code indicates that the washer was unable to fill with water.

What does f09 mean on a washing machine?

Whirlpool Duet Washer Error Code E01 F09 means LONG DRAIN TIME. When your Whirlpool washer goes into drain mode and the drain time is past 8 minutes and not reaching the reset level in the pressure sensor then the valves in the drain are turned off and the drain pump will cease to pump out the water.

What does e1 f3 mean on a Whirlpool washer?

The F3 E1 alert indicates the washer can‘t detect the water level. There may be an issue with the appliance control unit or associated wiring. Shut off water valves to the washer, and call for service. CLICK HERE to review a video for more information on the F3 E1 code.

What is wrong when a washer doesn’t spin?

If your washer fills with water but doesn’t agitate, the problem is likely to be a faulty lid switch, a broken belt, or a problem with the motor. 1 Check the washing machine’s spin cycle. If this works, the motor is operating and the belt is not broken. If the spin cycle doesn’t work, the belt may be loose or broken.

How do I reset my washing machine?

To perform the Master Reset, carefully unplug the washing machine from the power outlet and leave it unplugged for one minute. After one minute is up, plug the washer cord back into the wall. Next, open and close the door of the washing machine 6 times within 12 seconds to send a “reset” signal to all the components.

Is there a reset button on a washing machine?

Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it. Although not usually a button, programmable washing machines might have a reset function or position to clear a program problem.

How do you troubleshoot a washing machine?

Many times the solution is an easy fix or an inexpensive part.
  1. Drain Hose. When a washer leaks only during the spin cycle the likely cause is the drain hose.
  2. Fill Hose. The fill hoses could also be the culprit.
  3. Water-Inlet Valve.
  4. Too Much Detergent.
  5. Door Seal (front-load)
  6. Drain Pump.
  7. Drains and Hoses.
  8. Tub.

Are Haier washing machines any good?

Haier Front Loaders

This 1200 RPM washing machine features 16 different wash programs and is suited for 3-4 people. Some of the programs available include hand wash, regular, cold wash and quick wash. It has a 4 star energy rating and a 4.5 star water rating (WELS), making it a fairly efficient appliance.

What is e6 error in washing machine?

The E6 error is telling you that the clutch is causing the error or fault. This fault can happen if a paperclip, nail, coin, or a different object is jammed in between the tub and pulsator. To clear the E6 error code on a top load LG washer: Take out all clothing or towels from the washer.

What does e3 mean on Haier washer?

The. washer door is not closed properly. Close the top washer door properly to. continue. E3 – The washtub is not spinning.

What does the E stand for in e1?

Definition. E1. Everyone. E1. Enterprise One (JD Edwards software)

Why does my nuwave say e1?

Pan Presence/Induction Cookware Ready – E1 error code will be displayed if the cooktop doesn’t detect cookware or is not induction ready. You will hear a beep when the error code will appear.

What does it mean when your air conditioner says e1?

If your air conditioner displays E1 in the display panel and won’t turn on, it means that the Room Thermistor (a device connected to the thermostat that detects room temperature) is shorted or defective, and you need to have your air conditioner serviced.

What is e1 error in Whirlpool washing machine?

Whirlpool Washing Machine FP or F9 E1 Error Code. If your washing machine is not working correctly it’s safe to say it’s developed a fault. A flashing FP or F9 E1 error code on the LCD display can ring alarm bells, but it’s typically associated with a water draining problem inside the drum.