What happens if you don’t submit meter readings? is it better to submit meter readings.
Generally, all new decks should dry out for at least 30 days before stain or paint is applied. Although a finish can be applied immediately after construction, more work is involved, so it’s best to let the wood fully dry before finishing.
Wooden decks require regular maintenance to help preserve its color, grain, and longevity. All year round, your deck is exposed to rain, snow, sleet, ice, and direct sunlight. It’s important to restain your deck to help prevent the impact that these elements may have on the wood.
Months to Weather New Wood: 2-3 Months for Transparent and Semi-Transparent colors. 12 months for Semi-Solid Colors. Number of Coats Applied to New wood: 1 Coat is suggested if the wood is under 12 months old. Restore-A-Deck Wood Stain can be applied to dry or damp wood.
We recommend you wait around six months for it to be fully eroded. Once you’ve waited for the coating to erode, treat your new decking as normal with oil or stain. Another important way to protect your decking is to use an end grain protector to protect the exposed ends.
Typically, homeowners should restain horizontal surfaces such as decks every two to three years. Poor deck upkeep will decrease the time you have to enjoy the deck before restaining it, while good deck upkeep may give you another year or two before you need to restain the deck.
Chemical Protections The only way to properly use untreated wood of any type outside is with the addition of water-repellent preservatives, sealer or paint that contain UV protection. Over-the-counter wood preservatives are available in clear versions, or with stain containing pigment or dye to color the wood.
Sealing a deck is best for cedar, teak, mahogany, or other quality woods as it enhances the wood grain and natural color. … Staining a deck protects the wood from mold, mildew, moisture, and rot, and UV rays and sun damage.
Average Cost to Stain a Deck The cost to stain your deck typically ranges from $540 to $1,050 with an average of just over $700. This equates to an average cost of $2 to $4 per square foot for labor and materials. Higher-quality stains will run up the price, as will washing or sealing the wood prior to staining.
Apply stain only at the proper temperature. For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 degrees Fahrenheit. Stains do vary, so check the label first. Avoid high humidity and staining on hot surfaces.
The air temperatures can be ideal to stain your deck in the fall. Most deck stains should not be applied in temperatures below 50 or above 90. Winter may fall below 50 in your area and for most regions in the country, summertime can see temperatures above 90.
If applied in cold weather, it tends to crack and chalk, allowing moisture in that does damage to the wood underneath. New paint technology is now making it possible to paint in cold weather that reaches nearly freezing conditions. This new type of acrylic-based paint allows for paint application down to 35 degrees.
Although all softwood decking should have been pressure treated to ensure a long life, your deck will benefit from a little bit of TLC every few years or so. However, there’s no need to paint decking if you don’t want to – a clear oil or preservation treatment will do the job.
DO wait 30 days before sealing a new deck. But preservatives in the wood often require about 30 days’ dwell time before the deck can soak up the sealant. After a 30-day period, pour some water on your deck. If it beads up, the wood is still too wet to seal, but if the water is absorbed, it’s ready to seal.
Also, recommended but not required is the use of a deck brightener before staining your deck. Deck cleaners, such as the Wood Deck Cleaner and Brightener by DeckWise or the TimberTech Deck Cleaner, will lift and remove any stuck-on grime from your wood deck boards.
|Deck size||DIY cost||Cost to hire someone|
|10×10||$41 – $134||$157 – $404|
|12×12||$59 – $176||$226 – $582|
|12×16||$78 – $222||$301 – $775|
There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.
For most decks, sealing once each year is a good rule of thumb. Depending on the condition of your deck this can be adjusted, but keep in mind that you should never go beyond three years maximum before re-sealing and staining.
Yes, you can use untreated wood to build a deck, but not without preparing it first. You can’t, of course, pressure treat it yourself, but you will need to seal; the wood and stain/paint it to ensure the wood is ready to take on the harsh external weather.
Untreated Wood means wood (including lighter pine, tree trunks, limbs and stumps, shrubs, and lumber) which is free of paint, glue, filler, pentachlorophenol, creosote, tar, asphalt, chromated copper arsenate (CCA), and other wood preservatives or treatments.
An untreated wood surface is drab, but paint will liven it up. … However, untreated wood requires some special attention before painting. If you don’t properly prepare the wood, moisture damage could destroy the wood, or natural tannins may bleed through the paint.
Wood rot is most commonly caused by an infestation of fungi. … Fortunately, there are several ways to prevent rotting wood. If you’re looking to protect your wooden deck, coating it with deck stain or sealer is the best way to keep moisture (and therefore rot) at bay.
THE AVERAGE LIFESPAN OF A WOOD DECK: Typically 10 to 15 years. The actual lifespan of your wood deck will depend on the type of wood you’ve chosen and how well you keep up with wood’s rigorous maintenance schedule.
One of the main reasons the professionals don’t recommend staining wood decks is because of the amount of time and energy involved. Stains don’t generally last more than a year. … Your professional deck builder will recommend that instead of staining your deck every year, you allow the wood to naturally gray over time.
The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain.
How Much Stain Do I Need For My Deck? For decks and patios that measure up to 175 square feet, you will only need one gallon of stain, in any transparency. If your deck or patio measures up to 550 square feet, you will need to buy 2 gallons of stain.
Most wood stains take about four hours per 100 square feet to dry. We recommend a full day before loading it up with furniture and feet.
If it’s too wet or cold, the drying time for stains can easily double. In extreme cases, the product will just stay wet until the humidity decreases or the temperatures rises. Oppositely, if it’s too warm, the stain will dry very quickly and could lead to lap marks or uneven penetration.
The best time to stain your deck is either the spring or the fall. … Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure. In the summer, stain your deck in the morning or evening so the deck surface isn’t too hot.
Extreme heat or sun can work against you when you are staining your deck. The direct sunlight can cause the deck to dry too quickly which will leave water marks. If the weather is forecasting for no rain, and you can expect the temperatures to be below 80 or 85 degrees Fahrenheit, make a plan to stain your deck.
Wood stain works in a wide range of temperatures. Staining at temperatures ranging from 50 to 90 degrees Fahrenheit usually works, but the optimal temperature is around the mid-70s, not too hot and not too cold.
Because stain requires a dry deck for a secure application, a week of dry fall weather is ideal for staining your deck than in summer or spring humidity. More specifically, the moderate temperatures of early fall are optimal for staining, as the later fall weeks may bring colder days that are too chilly for your stain.
Deck Painting A quality paint job can last for up to 10 years when it’s done right. Paint allows you more color options, as where stain is limited to shades of brown. Because paint fills gaps and cracks, it hides the flaws of a weathered or old deck much better than stain does.
- Clean It Up. Similar to our roofing advice for the winter, you should clear away clutter on your deck. …
- Scrub It Down. …
- Remove Mold or Mildew Buildup. …
- Apply Water Repellant Seal. …
- Cover With a Tarp. …
- Remove Snow.
Grey decking paint offers a modern and sophisticated alternative to traditional decking paint colours and is designed to colour and protect against harsh weather conditions.
Decking Oil nourishes the wood, giving it an enhanced natural finish. … Oiling a decking area does not come without its potential issues; not all types of wood are suitable for oiling and you cannot paint or stain an oiled deck until it has weathered over several years.
Stain is normally cheaper to purchase than paint. It is easier to apply stain, as well as to re-coat surfaces that need a touch up. Stain is quicker to apply than paint, because you don’t always need to prime surfaces first. … Paint is liable to peel, crack or flake, whereas stain is more resistant to chipping.
A pressure washer can clean a wood deck much faster than you can scrub it by hand. That is a terrific advantage. However, a pressure washer will frequently destroy the surface of the wood. … Those that are not eroded can be dislodged, leaving the wood fuzzy or rough after it dries.
Cost to Seal a Deck Sealing a deck costs $895 or typically between $551 and $1,277. You’ll pay $0.75 to $4 per square foot for both materials and labor. Labor alone makes up 50% to 75% of the total price. Cost factors include regional worker rates, complexity, size, prep needs and accessibility.
Splintered, cracking, or just plain rough wood should be sanded first, then pressure washed to open the wood’s pores and allow penetration of the stain. Deeply grooved wood that has mold, moss and other growing things filling the cracks will need treatment with a deck and siding cleaner.