Sikkens Cetol SRD is a one-coat, translucent exterior wood finish created for use on a wide variety of surfaces. The easy-to-use finish has excellent UV protection and allows beautiful wood clarity.
What is Sil Fos made of? sil-fos 5.

How long does sikkens cetol last?

Sikkens states in their literature that you should expect to get 2-4 years life out of their system on a sunny side of a house, and 3-5 years on a shady side. At this point, maintenance should be performed. Maintenance is cleaning the surface gently with bleach, TSP, and water.

How do you use sikkens cetol?

Apply only one coat of Cetol SRD by natural bristle brush, roller or spray. If spray or roller applied, Cetol SRD must be back brushed immediately to ensure penetration and to avoid an uneven finish. When using Cetol SRDRE , brushing is the preferred method for application on decks and other horizontal surfaces.

Is sikkens cetol oil-based?

Sikkens Proluxe Cetol SRD is a one coat, oil-based, translucent exterior wood finish. Sikkens Proluxe Cetol SRD was created for use on a variety of wood surfaces including siding, rails, decks, and logs.

Is sikkens cetol a stain?

Sikkens ProLuxe Cetol SRD Semi-Transparent Stain is a one coat, water-based exterior wood finish perfect for a variety of wood surfaces. Available in 60 natural colors and with added UV protection, this easy-to-use product will both protect and beautify your home.

Is sikkens worth the money?

Sikkens is a world class product that is head and shoulders against other deck stains, oils and look alikes. Been using Sikkens for 23 years and have always been satisfied. Not cheap, but worth ever dollar. Takes 24 hours to dry and looks terrific when cured.

What is the difference between cetol 1 and cetol 23?

Cetol 1 is a premium, translucent exterior wood basecoat to be used with Cetol 23 Plus. Its superior oil alkyd formulation offers excellent penetration and adhesion to vertical wood surfaces. Cetol 23 Plus is a premium, translucent topcoat for Cetol 1.

Is Sikkens stain good?

Sikkens Cetol Dek Finish receives shining reviews across the board. It boasts excellent performance and durability, with protection lasting up to two to three years when applied and maintained as directed by the manufacturer.

Do I need to sand between coats of Sikkens?

Do not sand between coats, as this product needs the full application thickness from each coat for its UV effectiveness. … Lightly sand the old finish (with the grain) using 220-grit or 320-grit sandpaper. Remove all sanding residue with a vacuum, and apply a maintenance coat of Cetol.

Do you sand between coats of Sikkens?

Sikkens Cetol Deck Slip Resistant GENERAL ADVICE: Do not sand between coats. Always apply coatings along the grain and never across.

Is sikkens cetol water based?

Sikkens Cetol BLX-Pro is a quick drying water based exterior timber finish that is ideal for decks and outdoor furniture providing good durability and flexibility. Its highly transparent finish accentuates the natural characteristics and colour of the wood.

Is sikkens breathable?

Sikkens ALPHA TEX ACRYL Breathable water-based paint.

Can you use sikkens on pressure treated wood?

Sikkens Cetol DEK may be used on: Pressure Treated Wood, Pine, Hardwoods, Cedar, Redwood, Composite Wood and Materials.

What is Sikkens stain called now?

Now the Sikkens branding has been dropped from the label altogether and replaced entirely with “PPG ProLuxe.” Per their purchase agreement, PPG has now dropped all additional Akzo Nobel trademarked names.

What stain is comparable to sikkens?

Cetol SRD Semi-Transparent Stain is a one-coat, exterior wood stain for use on a variety of exterior wood surfaces. The three way UV protection combined with high solids alkyd resin make Cetol SRD Semi-Transparent Stain another example of the advancements central to Sikkens Next Wave Technology.

Who makes Sikkens?

Sikkens is part of AkzoNobel, the largest global paint and coatings company and a major producer of specialty chemicals. AkzoNobel supplies industries and consumers worldwide with innovative products and are passionate about developing sustainable answers for our customers.

What is cetol HLS Plus used for?

In this video, we cover Sikkens Cetol HLS plus. HLS plus is a low build, solvent-based highly translucent exterior woodstain which can be used as a base coat on doors and windows. It is also the perfect product to choose as an attractive, practical finish coat on soffits, fascias and cladding.

Is sikkens now PPG?

CRANBERRY TOWNSHIP, PA – PPG announced that its SIKKENS® PROLUXE™ wood finishes will now carry the PPG name. … The PPG ProLuxe product line will contain all of the same Sikkens ProLuxe products and formulas, but will now showcase the updated PPG ProLuxe name and new packaging.

How many coats does cetol 23 have?

After preparation, apply 1 coat of Cetol 1RE and 2 coats of Cetol 23 PlusRE assuring a 24-hour dry time between coats. If possible, back prime with the first coat. During application, saturate all end grains, nail holes, cavities and cracks in the wood.

How do you take cetol 23?

After preparation, apply one (1) coat of Cetol 1, and two (2) coats of Cetol 23 plus, assuring thorough dry (minimum 24 hrs) between coats. During application, saturate all end grains, nail holes, cavities, and cracks in the wood. Brush on a liberal coat, and maintain a wet edge to prevent lap marks.

Is superdeck stain good?

The stain did not penetrate very well into the wood even though the Superdeck cleaner and brightener were used to prep prior to application. Only one light coat was applied. – 80% of the initial color was left after 2 years of exposure to full sun. The Superdeck did score fairly well here.

Does cetol go bad?

These volitile components will evaporate fairly quickly in warm conditions if the tin is left open, but even if closed, once oxygen has mixed in (the more space in the tin the more oxygen) the products will break down over time (depending on tempreture, product, amount of air that got into the can and time).

Can you tint Sikkens stain?

The Rubbol Siding Finish, Rubbol Solid Stain, and Rubbol DEK can be tinted using some of the universal tints available. No additives should be added to any of our products as they could possibly slow down drying time, change gloss levels, affect the flow of the product, etc.

How many coats does cetol Marine have?

Apply 3 coats of Cetol® Marine. Always allow 24 hours drying time in between coats. Sanding between coats is not recommended as this will result in a reduction of dry film thickness. Recommended film thickness must be applied to ensure effective product performance.

How many coats of cetol are there?

Cetol 1 is always used as the first coat in any bare wood application. All systems consist of three coats. All three coats must be applied within 30 days after preparation.

How long does sikkens cetol filter 7 take to dry?

The coverage rate greatly depends on the method of application being used and the nature of the substrate to be coated. Drying times at 20°C/ 65% relative humidity: Dust dry: after approximately 4 hours. Recoatable: after approximately 16 hours.

Is there a clear sikkens?

Sikkens 1L Cetol TGL Gloss Plus Clear Timber Finish.

How do you use sikken wood stain?

  1. Apply 1 coat with a good quality, long haired, natural bristle brush in a full flowing coat, laying off in the direction of the grain, using the minimum number of brush strokes necessary.
  2. Leave to dry for 24 hours.
  3. Finish joinery with two coats of Sikkens Cetol Filter 7 Plus.
Is sikkens Rubbol water based?

Sikkens RUBBOL WF 318® is a water based pure acrylic, Satin, opaque Mid and Topcoat paint. It creates a very tough and hard wearing finish that combines the advantages of the technology and stunning colour in one product.

What is Sikkens HLS?

Sikkens Cetol HLS Plus is a solvent-based low-build woodstain for exterior softwoods and hardwoods. Flexible preventing cracking and peeling. High UV resistance against light damage helps to maintain the integrity of the surface. An ideal basecoat prior to using Sikkens Cetol Filter 7.

Does sikkens make a solid stain?

ProLuxe Premium Solid Stain Wood Finish is a premium, solid colour stain for decks, fences, siding, and outdoor furniture.

Is sikkens Rubbol oil based?

To clear up some confusion, this is an acrylic/oil hybrid, not an oil stain. … Rubbol Solid DEK is an acrylic solid stain. Sikkens provides very detailed preparation and applications instructions for their products and they are there for a reason.

Can you use sikkens on decking?

Sikkens CETOL® WF 761 is designed for Decking in mind and is a Brushable 1K Waterborne Acrylic, High-build, Tranlucent Stain that can be used as a one pot solution on both exterior and interior stable timber components.

What Colours does sikkens come in?

  • 077 Pine. Sikkens.
  • 004 Natural Oak. Sikkens.
  • 006 Light Oak. Sikkens.
  • 085 Teak. Sikkens.
  • 045 Mahogany. Sikkens.
  • 009 Dark Oak. Sikkens.
  • 010 Walnut. Sikkens.
  • 048 Rosewood. Sikkens.
Is sikkens toxic?

Repeated or prolonged contact with the mixture may cause removal of natural fat from the skin, resulting in non-allergic contact dermatitis and absorption through the skin. If splashed in the eyes, the liquid may cause irritation and reversible damage. Ingestion may cause nausea, diarrhea and vomiting.