Wood has proven to be the most effective board material. When properly implemented with the right roof covering, wood can be quite a resistant and aesthetically pleasing fascia that complements the overall structure.
What is the best fascia material? .

What is the best material to use for a fascia board?

Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.

What is the best timber for fascia boards?

Timber: Popular hardwood and softwood timber species for fascia board are western red cedar European oak, Utile, Iroko, Douglas fir, Larch and Accoya. The latter is an extremely durable sustainable option. All types can be available FSC certified and suitable for domestic applications.

How thick should fascia boards be?

Fascias are typically made from 1-inch material, with the width being enough to cover the rafter width. Typically rafters will range from 2×6 to 2×8, although some are larger depending on the roof construction.

Is UPVC fascia better than wood?

Whilst wooden cladding offers a more classic look, the benefits of using UPVC far outweigh the benefits of using wood. By using UPVC you’ll also be protecting the existing woodwork and maintaining your property long term. … Wragg Roofing are experts when it comes to installing and repairing UPVC guttering and fascia.

Should I use treated lumber for fascia board?

Purchase pressure-treated lumber to replace your fascia boards as a way to extend the life of the repair. Pressure-treated lumber is designed for outside applications and resists rot, moisture and insect damage. … Cut the new lumber to size and secure it to the rafter ends with galvanized finish nails.

Do roofers replace fascia boards?

Most roofers, in that case, are generally trained to spot problems in fascia and gutters as well the training required to take care of them. … Fascia both keeps the gutters secure and seals the interior of the attic to some degree. Every so often in the lifespan of your home, you will see fascia repair or replacement.

What type of wood is used for eaves?

All About Eave Eaves are simple boxes. The bottom — or soffit — where the damage is, is typically thin plywood, usually 1/4-to-3/8-inch-thick. It’s cut in long sections and butt-jointed together with a thin piece of plastic molding that slips over both ends forming a joint.

How do you fill the gap between fascia and wall?

Slowly move down the joint to apply a steady bead of caulk into the gap, instructs Ron Hazelton. Caulk about 2 feet of the joint and stop to smooth the bead with your finger. Apply more caulk to the gap as needed to fill it completely. Continue caulking until the entire fascia board has been sealed.

How long do wooden fascias last?

Well installed and maintained wooden fascia can last for up to 20 or 30 years, before they start deteriorating. Although some might need replacing within 5 to 10 years.

What is the board behind the fascia called?

Soffit is the layer of wood, vinyl or aluminum that extends from the bottom of the fascia to the top piece of your wall board. Together, they protect the rafters from weather, moisture, and allow air to flow through soffits and vents.

What is the thickness of Trex fascia?

The actual Trex decking boards are available in 1 or 2 inch thick boards. The three main types of boards are the Fascia, Grooved Edge and Square Edge. The Fascia is available in either 8 inch or 12 inch long boards. The boards are 0.75 inches thick and 11.375 inches wide.

Is PVC good for fascia board?

Obviously the biggest reason for using a PVC trim board is long term maintenance combined with traditional architectural appeal. … PVC trim boards will not rot, twist, split or warp. In addition you can leave it unpainted if you like or paint it to match a certain color scheme.

Is fascia the same as cladding?

Cladding comes hand in hand with fascia as it’s the external layer of a building that finishes off the walls. …

Can you use soffit board as cladding?

Hollow soffit cannot be used as cladding (externally) as it is not water tight however it can be used internally.

Is Pine Good for fascia?

Cedar is a popular fascia wood and redwood is another. That’s because both of these wood species have some natural rot-resistance, even when unpainted. If you prime and paint the fascia, you can also make them out of fir, spruce or pine, which are all less expensive.

How much should it cost to replace fascia boards?

Replacing your soffit generally costs about $20 to $30 a linear foot installed, while replacing your fascia costs about $15 to $25 a linear foot installed. Prices for the project depend on a number of factors, including the materials used and the size of your house.

Do painters repair fascia?

To protect the rest of your house, you’ll need to get it replaced when the fascia is compromised. A professional painter will be able to tell when fascia boards need to be replaced. They can do the job as part of the painting project and keep it on target for the estimated completion time.

Is it hard to replace fascia boards?

Luckily, replacing a fascia board is as easy as taking out the old board and fitting a new one in its place. Once you’ve installed a new board, all you need to do is seal the seams and paint it to match your home. With a short afternoon renovation, you can have new fascia boards that will last for years!

What is the best wood to use for soffit?

Although unsanded and touch-sanded grades of plywood are often used for soffits, optimum appearance and finish performance is achieved by using panels with Medium Density Overlay (MDO), or textured (such as APA 303 Siding) or sanded A-grade faces.

How thick is soffit plywood?

Standard soffit material is 3/8- or 1/2-inch-thick exterior plywood in pine (or similar softwoods) or cedar. Common, but much less durable, is Masonite or similar fiberboard soffit, as well as much more weather-resistant fiber-cement.

Should fascia be sealed?

Soffits and fascia should be freshly painted and sealed when your gutters are assessed to prevent against future damage.

Is black fascia more expensive than white?

Black: Black is a more traditional colour, but it is more expensive than white. Grey: Grey is the most modern colour for fascias, and it is slowly being introduced to the UPVC suppliers. … Your soffit sits directly below the fascia.

How often should you replace soffits and fascias?

There is no definite timetable for replacing a soffit or fascia, but there are some signs that roof repair contractors look for when evaluating your roof’s overall health.

Are uPVC fascias any good?

uPVC is an ideal material due to its durability and hard wearing properties. Used to replace older plastics or traditional wood cladding, fascias and soffits, unlike wood uPVC won’t rot or corrode despite constant exposure to the harsh British elements.

What is the difference between fascia and soffits?

Typically a soffit is used in the area beneath the eaves on the exterior of a house to close the space beneath the eave. The soffit extends from the side of the structure to the edge of the eave. Fascia is used to create a barrier between the edge of the roof and the outside.

What is Friezeboard?

Frieze board is a type of trim that is typically installed between the top of a home’s siding and the soffit. It’s normally installed flat against the home, but it may be installed at an angle if installed on a gable. Frieze board may also be used as a decorative, horizontal trim anywhere in or on the home.

Do fascias or soffits go first?

What is a soffit? Soffit, or soffit boards, are similar to fascia, but instead of running parallel to the walls of the building, they are installed at a 90-degree angle to the walls. Soffit boards are fitted underneath the fascia boards, to fill the gap between the fascia and the wall.

What nails do you use for fascia?

  • Galvanized nails.
  • Aluminum nails.
  • Stainless steel nails.
What size are the Trex fascia boards?

ColorsGravel Path, Havana Gold, Island Mist, Lava Rock, Rope Swing, Spiced Rum, Tiki Torch, and Vintage LanternLengths Available12 ftNominal Dimensions (width x thickness x length)12 in x 1 in x 12 ftActual Dimensions (width x thickness x length)11-3/8 in x 0.56 in x 12 ft

Are Trex white?

Trex Universal 12-ft White Square Composite Fascia Deck Board.

Is azek better than veranda?

If you need a particular sizing option, you might want to pick Azek Exteriors because the brand has more size, length, and design options. Veranda HP trim keeps it simple with a classic all-white trim board that is slightly more affordable than Azek trim boards.

Is AZEK trim fire rated?

For instance, AZEK is the only product that has a Class A Fire Rating, that means that although the board may burn it’s not going to cause the flame to spread to your house.

What is Hardi Senepa?

HardieFlex® Senepa 9.0mm is a versatile fascia board suitable for all types of houses. It can be used to highlight intricate roof designs and it operates as backing for gutter systems to prevent water and vermin from entering the structure through the eaves line.