What is the difference between Cove and crown molding?

Also known as coving, cove molding is plain, concave-shaped trim employed where walls and ceilings meet. It can also be used on stairs, at the meeting of risers and treads. In essence, cove may be considered a less ornate version of crown.

To answer your burning question: No – crown molding will never go out of style.

Modern Interiors do not use crown, Traditional has additional layers of decorative molding, Transitional is somewhere in the middle.

There are a couple of situations when you don’t want to use crown molding. If you have cathedral or vaulted ceilings, a typical crown molding will probably not fit or look good. Also, crown moldings need a distinct starting and stopping point, ideally going around a room in both directions and meeting again.

For an 8 foot ceiling height the recommended crown size is 2-1/2″ to 6″ tall with no picture mold. Use the square footage and level of formality of the room to choose an appropriate crown size and style in that range.

Bathrooms can really benefit from crown molding as it adds a beautiful elegant look to the décor. … There are many different types of crown molding but the best type of crown molding to install in your bathroom is moisture-resistant crown molding.

What Can I Use Instead of a Crown Molding? Medium density fiberboard molding, stick and peel strips, and polyurethane options are the best alternatives to crown molding. They are inexpensive and easy to install.

Crown molding offers a fairly easy way to make a room look finished and elegant at a lower cost while covering problems. It’s not an essential part of a room, but it does go a long way to add class and value to a home without adding too much strain to your budget.

Crown molding has been around for centuries and it will continue to be a touch of elegance for centuries to come. It is not going out of style. However some people have a preference for it while others will never notice it until it’s not there.

Coves usually have narrow, restricted entrances, are often circular or oval, and are often situated within a larger bay. … Geomorphology describes coves as precipitously-walled and rounded cirque-like openings as in a valley extending into or down a mountainside, or in a hollow or nook of a cliff or steep mountainside.

1 ) Never leave crown moldings closer than 9 inches from a ceiling. Once you get within a foot of the ceiling you should have the cabinetry and molding meet ceiling. Don’t create spaces that look odd and that can’t be cleaned.

The more detailed door style, a more detailed crown would be appropriate. The height of the Crown Molding should also be taken into consideration, a large room with high ceilings and taller cabinets can handle larger molding. If the room is smaller and the ceilings lower, a large molding would overtake the space.

Crown molding is decorative trim that is added to the top of your cabinets. The benefit of installing crown molding is that it draws the eye upward, showcasing the elegance of your cabinets. Crown molding can either bond with the ceiling or allow for space above the cabinet.

All of the crown moldings in your home do not need to be the same style. … However, it is essential to consistently use the same crown molding size around your home to maintain consistent dimensions and visual proportions.

Crown molding should be painted lighter than your walls to create a slight contrast and draw attention to the space’s architectural beauty.

To have a professional install crown molding, expect to pay between $4 and $15 per linear foot for materials and labor. A single room costs anywhere from $300 to $800, while a whole house installation costs between $3,200 and $12,000.

Baseboards and crown molding do not have to exactly match. Instead, they should have a similar element to help create a cohesive look. You can make your crown molding and baseboard matching using one of these three elements: Color.

• Wood—Best for Variety. …
• Plaster—Best for High-End and High-Style Projects. …
• PVC—Best for High Humidity Hot Spots. …
• Flex—Best for Curvy Walls and Windows. …
• Polystyrene Foam—Best for DIY No-Fuss Projects. …
• Polyurethane—Best for Versatility.

A general rule of thumb for your baseboards is the 7 percent rule — they should equal 7 percent of the overall height of your room. … Your crown molding should be scaled to be smaller than your baseboards and appropriate to the height of your ceilings.

Crown molding does not make a room look smaller — in most instances. … If the room is small and has normal or low ceilings, a 2- to 4-inch-width molding is appropriate. The molding can be wider if the ceiling is a little higher and can be up to 6 inches wide for a very high ceiling — up to 12 feet.

Polyvinylchloride or PVC trim is a material that can be used in place of wood for many building and construction projects. Cellular PVC can be molded and shaped just like wood and is rapidly becoming a favorite option for builders and contractors for trim work around new homes and other such projects.

I have MDF in both my personal bathrooms and installed in many customer’s homes. As long as water doesn’t get on it or steam is significant, it should be no problem.

MDF Moldings MDF, or medium-density fiberboard, offers another option for inexpensive crown moldings. MDF moldings are made of layers of wood pieces glued together under intense heat and pressure. The result is a lightweight, dense and inexpensive crown molding that can be primed, painted and installed like wood.

The price of professionally-installed crown molding is more than DIY projects, even if you do choose cheaper materials. On average, one room could cost between $200 and $600. If you’d like every room in your house to have crown molding, you may pay up to $4,000.

You can paint the walls before or after installing the molding. However, painting prior to installing the molding has an advantage in that you do not need to protect the molding with painter’s tape and can paint more quickly without worrying about getting paint on your molding.

Straight or base with no-toe is often used for carpet installation. Cove base moulding is best applied in vinyl, laminate and tiled floors.

But many inexperienced do-it-yourself enthusiasts have difficulty making concave cove molding fit neatly with adjoining miter cuts. The solution is using a coping saw to fit one end of a piece against the face of the adjoining piece. This saves time and improves the uniformity of inside corners.

Cut 1/2 inch from the end of the molding at a 90-degree angle with a coping saw or a miter saw. This gives you the clean, sharp edge needed on the profile that enables you to cope it with precision.