What’s the difference between 1157 and a 2057 light bulb? which bulb is brighter 1157 or 2057.
LED 1156 bulbs are LED lights you can use in your automotive, recreational, or marine vehicle. They can add warm, noticeable lighting to exterior lights and are suitable for turn signals, daytime running lights, backup lights, and taillights.
The SYLVANIA 1157 Long Life Mini Bulb makes a perfect direct replacement solution for directional lighting including parking, turning, and backup lights. These bulbs offer increased longevity, and have been engineered to withstand a sizeable amount of road shock and vibration.
These bulbs are used as tail lights in a wide range of Honda, Toyota/Lexus, Kia, Subaru, Chrysler, and VW vehicles, among many others.
They are interchangeable like you mentioned. We have a 1157 # 30-90-157.
|Monday – Thursday||8:30am – 6pm CST|
|Friday||8:30am – 4pm CST|
#1156 Miniature Bulb Ba15S Base – 12.8 Volt 2.1 Amp 26.88 Watt S8 Single Contact Bayonet (Ba15S) Base, 32 MSCP C-6 Filament Design. 2.0″ (50.8mm) Maximum Overall Length (M.O.L.), 1.04″ (26.5mm) Maximum Outer Diameter (M.O.D.), 1.25″ (31.75mm) Light Center Length (L.C.L.). 1,200 Average Rated Hours.
what’s the difference? The 1156 is brighter and will burn hotter. Could cause problems with lense melting.
1156 Current:2.100 Watts:27.00 Candlepower:32 Lumens:402.
As mentioned by another poster, the 1157 and 3157 both have the same output. Only a 3457 wedge bulb has a higher output at 40/3cp.
Philips 1156 Standard Auto Bulb (Pack of 2) 26.9 Watts and 12.8 volts.
Helpful Expert Reply: It depends on a few things as it’s not a standard difference but typically an incandescent 1157 will pull around 2 amps whereas an LED like the part # CM93236 pulls around 0.2 amp.
Philips 1157 Standard Auto Bulb (Pack of 2) Philips Automotive brand miniature lamp. 27/8.3 Watts and 12.8/14 volts. S-8 size and shape, double contact bayonet base.
Expert Reply: The Optronics 1157 Replacement Bulb, part # A1157B, and similar dual-filament bulbs have two different filaments. One filament is of a different resistance value, and thus makes a brighter light.
Voltage is the same between the two bulbs, as is amperage on the low filament. The high filament of the 2357 bulb is rated at 2.23 amps vs. 2.10 amps for the 1157, so there’s not a big difference there. … The life expectancy of the 2357 bulb is shorter than that of the 1157.
1157A is amber coated and 1157NA is natural amber glass or not coated. 1 of 1 found this helpful.
The bulb base is a 15mm diameter bayonet fit commonly referred to as the BAY15D type. It is sometimes also known as a 1154 (6 volt) or 1157 (12 volt) fitment. … The two pins are on opposite sides of the base (180° spacing) and one is higher than the other so that the bulb can only be inserted the correct way round.
Light Source TypeIncandescentBrandSYLVANIAManufacturer Part Number2057.TPBrightness402 LumenWattage26.88 watts
Overview. LED replacement bulbs can fit vehicle tail lights, brake lights, reverse lights, turn signals or side marker lights. This 3157 dual-contact, dual-function bulb has 18 LEDs (5050 SMD) that create a 360° viewing angle for better, allover light emission with reduced hot spots.
ManufacturerBritta ProductsSpecial FeaturesLow Power ConsumptionMirror Lighting TypeLEDVoltage12 VoltsWattage25 watts
3156 & 3157 Red Tail Light LED Bulbs The 3156 bulb and 3157 bulbs is used as the tail lights of many modern vehicles, including Fords, Chevrolets, VWs, Acuras, Toyotas, and many more. With Diode Dynamics drop-in LED upgrades, you can choose from several brightness levels to suit your vehicle!
Bayonet bases or caps are often abbreviated BA, with a number after. The number refers to the diameter of the base e.g., BA15s is a 15 mm diameter bayonet base bulb. The lower-case letter s specifies that the bulb has a single contact on the bottom of the base.
Manufacturers Part Number1141Wattage18Lumens265Voltage12.8ShapeS8
The SYLVANIA 1141 Long Life Mini Bulb makes a perfect direct replacement solution for directional lighting including parking, turning, and backup lights.
The Sylvania 1156 bulb inside your tail light should have two small tabs at the bottom of the bulb that you will need to first align with the grooves in the light socket. Once the tabs are aligned, you should be able to just push it in, twist it a bit, and the bulb will come out.
#1004 Miniature Bulb Ba15d Base – 12.8 Volt 1.0 Amp 12.8 Watt B-6 Double Contact Bayonet (BA15d) Base, 12.0 MSCP C-6 Filament Design. 500 Average Rated Hours, 1.75″ Maximum Overall Length. 1.75″ (44.45mm) Maximum Overall Length (M.O.L.), 0.75″ (19mm) Maximum Outer Diameter (M.O.D.).
This item OXILAM 1156 LED Bulbs Reverse Light 2800 Lumens Extremely Bright BA15S 7506 1003 1141 P21W LED Bulb Used for Backup Light, Tail Light, Brake Light (Xenon White, Pack of 2)Add to CartCustomer Rating4.5 out of 5 stars (1325)Price$1599
The nominal version for this bulb found in most RVs is the 1141, using 1.5 amps to produce initially 259 lumens, degrading to 104 lumens over the life of the bulb. Bulb numbers 93 and 1003 are lower power versions of the 1141, using around 1 amp to produce a maximum of 189 lumens.
Ans: When looking at the 3057 bulb compatibility to the 3157, they can act as each other’s replacements. The defining factor is that they have the same plastic wedge base; hence, their interchangeable use. However, do not replace the 3157 with the 3057 in daytime running light.
Kenny, yes, these standard 3157 brilliant red LED bulbs will fit 4057K. The 3157 bulbs will replace many size bulbs such as 3156, 3057, 3056, 4157, 3157K etc. And there isn’t somethig different between 4057 and 4057k, just the named method is different.
Can I use a 3057 bulb instead of a 3157 bulb? Yes, you may use the 3057 bulbs instead of 3157 bulbs. Both of these bulbs have wedge D.F mounting and C-6 dual filament that fits in the same holder. Moreover, you can use this bulb to back up a light bulb, brake light bulb, parking light bulb.
You’ll find out why LED lights draw less from your battery while providing the same amount – or even more — light than the old incandescent ones. … When Dave connects incandescent bulbs to an amp meter, they draw up to 1.6 amps, but when LED lights are used, they only pull about . 26 amps.
Unless they areLED lights, tail lights, clearance lights, and marker lights draw 7 to 10 Amps. Brake lights and turn signals can be combined on a single circuit.
95 Amp for the taillight and 2.95 Amps for tail light and brake light. 1 of 1 found this helpful.
Amperage0.59 Amps/2.1 AmpsBase TypePlastic Wedge Double Filament (W2.5x16q)Filament TypeC-6/C-6MSCP32/3Length2.09 in.
These are mini replacement 12V (1156- and 1157-style) dual filament light bulbs commonly found in many tail lights and turn signals. The smaller design works well in applications that require a smaller bulb than the standard 1157.
The P21/5W is the European version of the dual filament lamp. It is 21 watts for the major filament (brake or turn application) and 5 for the minor filament (parking lamp).