Begin your nailing from the left side of the room and always do your nailing from left to right across the floor. Use a rubber mallet to tap the boards tightly into place. To nail your flooring, strike the plunger at the top of the nailer with the rubber mallet.
Which side does a monogram go on? monogram placement chart.

What side of wood floor do you nail?

Begin your nailing from the left side of the room and always do your nailing from left to right across the floor. Use a rubber mallet to tap the boards tightly into place. To nail your flooring, strike the plunger at the top of the nailer with the rubber mallet.

Does it matter which direction you lay hardwood flooring?

Wood floors should always be laid perpendicular to floor joists—across rather that in between them. This will make the floors structurally sound and will help prevent the planks from separating, sagging or buckling. So, there is no right or wrong way to lay your wood flooring.

How close do you nail hardwood flooring?

Place at least two nails in every board — the rule of thumb is to nail every 10 to 12 inches. Flooring is typically bundled in random lengths. Vary board lengths as you install so you will have staggered end-joints in a random pattern (image 6).

How are the first two rows of hardwood nailed to the floor?

Only the first and last rows of flooring are nailed through the top, which is called face nailing. Each row from the second until the next to last row is nailed through the tongues only. If your flooring is very narrow, drive one centered row of nails across the boards instead of two parallel rows.

Is it better to nail or staple hardwood floors?

A staple will give a stronger, less-forgiving hold because of its two-pronged construction. Nails allow for a more natural expansion and contraction of the hardwood floorboards with fewer problems. … While staples have become increasingly popular over nails, they tend to damage the floors more often.

Can hardwood floors be laid differently in different rooms?

If you want to install different wood grain floors in adjacent rooms, it can be easy to do so. You can simply separate them using wooden borders or T-moldings in the thresholds of the doors. You can also separate areas in large rooms with different grains of wood.

How do you stagger wood plank flooring?

Overlap Wood Floor Planks by at Least 6 Inches The basic rule to remember for creating a strong stagger is that all planks should overlap by 6 inches or more. This means that the short joint between planks should be at least 6 inches away from the nearest joint in any adjacent row.

How far apart do you staple hardwood flooring?

Per Flooring.org, the National Wood Flooring Association, states that for solid hardwood boards, nails or staples should be spaced between eight and ten inches apart, and for engineered wood boards, between four and eight inches. PowerNail has a handy Room Square Foot and Cleat Coverage Calculator.

How do you cut the tongue off of a hardwood floor?

To remove the tongue and grove from hardwood flooring, I would use a tablesaw with a ripsaw blade or comination blade. If the lumber is straight and of equal widths, set the fence so that blade will just remove the tongue. Saw off tongues from all of the boards.

Where do you start when installing hardwood floors?

Start the installation at the longest unobstructed wall. Remove the shoe molding, and snap a chalk line 3/8″ out from the baseboard (this allows for expansion in the hot, humid weather and contraction in the colder, drier weather of the hardwood flooring).

Do you start with the tongue or groove?

Begin the first row of flooring by placing the planks with the tongue side facing the wall. Install the second plank next to the first by aligning the tongue into the groove and press the plank down to snap it in place.

How do you start the first row of tongue and groove?

Mark the first row by placing the groove side of a board against the wall near a corner, leaving a gap of approximately 3/16 of an inch between the board and wall. Mark the subfloor on the tongue side and measure the distance between the mark and the wall.

What do you put under hardwood floors?

Simply put, underlayment is a layer of material between your subfloor and your floor. While some flooring comes with the underlayment attached, others will require you to install a separate underlayment. Most of the time, underlayment consists of rubber, cork, foam, or felt.

What is the recommended underlayment for hardwood flooring?

What Underlayment is Best for Wood? When installing hardwood or engineered wood flooring, the best underlay options are cork and foam. However, foam does have more give than cork so, while it is the more popular option, we recommend cork. Cork has less give, making it less likely to flex underneath your planks.

Are cleats or staples for 3/4 hardwood?

Hardwood flooring installers have used cleats for generations, nailing 3/4” solid hardwood planks to a wooden subfloor with 2” nails formed with an “L-shaped” head. Installation requires a nailer and mallet, and those with some experience can install about 300 square feet in an 8-hour day.

Can I install hardwood floor parallel to joists?

Hardwood flooring must be installed perpendicular to the floor joists or on a diagonal for any single layer subfloor. To run parallel to the joists, you’ll need to add a 1/2” plywood underlayment or brace every 16” between joists with a nominal 2”x 6” SPF nailed in place.

How do you stagger engineered hardwood floors?

  1. Lay out your wood planks by size. …
  2. Install the first row of wood planks, leaving about 1/2 inch between the row and the wall. …
  3. Start your second row of planks with wood from a different stack than the first row. …
  4. Continue alternating stacks when choosing the first piece of wood for each row.
What is the tongue side of laminate flooring?

The tongue on laminate flooring is the small flat edge on one side of the board, this is the top edge that is going to angle and lock into the bottom side of another board.

Do hardwood floors have to match upstairs and downstairs?

Interior designers and flooring experts universally agree on the answer. Stairs act as a transition between both floors, and therefore, should coordinate with both the upstairs and downstairs flooring. Some of the common scenarios for floors are: Both sets of flooring are hardwood (use wood stairs).

Is it better to have the same flooring throughout the house?

One of the most significant benefits of using the same flooring throughout the house is that even if your house is very small, the same flooring will make it appear very large and airy. Even if you use the same material throughout your kitchens and bathroom, it provides the illusion of an excellent and open space.

How should I arrange my hardwood floor planks?

The most common way to lay hardwood flooring is by aligning the planks parallel to the longest wall. Apart from a few exceptions like sagging joists, this is the preferred direction to lay wood floors because it aesthetically provides the best result.

Why do you stagger flooring?

The Importance of a Flooring Stagger Pattern Racking the floor to create a random stagger pattern serves two purposes: one that is aesthetic and the other, structural. … In terms of aesthetics, staggering the end joints avoids creating lines that run perpendicular to the direction of the floor.