Clogged or restricted exhaust vent air flow is the most frequent cause of a thermal fuse blowing. Check the lint screen for lint or a build-up of debris that could be inhibiting air flow through the dryer.
Why does my Maytag washer keep blowing fuses? maytag washer keeps blowing fuse.

Why does my dryer keep blowing its fuse?

The leading cause of thermal fuse burnout is obstructed airflow. Check the exhaust path for excessive lint or debris all the way to the exit point of the exhaust pipe. Check the blower wheel to make sure it isn’t broken or clogged up. This can be done by using “cool down” or “air fluff” mode.

How do you bypass the thermal fuse on a Maytag dryer?

Locate and Bypass the Fuse The thermal fuse will look like a thin strip of white plastic with a wire coming out of each end. In order to bypass the thermal fuse, use electrical tape to tape the two ends together. The thermal fuse will then be bypassed. Turn the dryer on to a heat cycle for no more than 90 seconds.

How do you tell if a thermal fuse on a dryer is bad?

Multimeter Test Remove the two wire leads from the thermal fuse and touch a multitester probe to each wire terminal on the fuse. If you get a reading of infinity, the fuse is fine. Any reading less than infinity indicates a triggered thermal fuse you will need to replace.

Why does my thermal cutoff keeps blowing?

The number one cause of dryer overheating is poor venting, and while it may be caused by a defective blower motor, it’s more often the result of a clogged lint filter or lint-clogged vents. You’re especially likely to have clogged vents if your pipes are made with corrugated metal or worse, plastic.

How much does it cost to replace a dryer thermal fuse?

PartMaterial CostTotal Cost
Thermal fuse$5-10$80-$130
Dryer thermostat$3-20$180
Bearing$50$130-$250
Roller$10-30$90-$230
Do Maytag dryers have a reset button?

Maytag dryers boast several features, including a high performance motor, reduced vibration, moisture sensors, wrinkle-prevention option, variable dry for different items and fabrics, and different temperature settings. One thing that Maytag dryers do not have, however, is a reset button.

How many thermal fuses does a dryer have?

Electric dryers use two household fuses or circuit breakers. The drum can still turn if just one fuse is blown, but there will be no heat. You may need to replace both fuses or reset both circuit breakers. If the dryer’s thermal fuse has blown due to a power surge or other mechanical problem, the dryer won’t heat.

What happens when thermal fuse blown on dryer?

A thermal fuse will blow when the temperature gets too high, not when it’s drawing too much current. … When it blows, the dryer stops generating heat. It’s necessary to replace it before the dryer will run again.

Where is the thermal fuse on a Maytag Bravo dryer?

This fuse is located on the exhaust duct. If the dryer overheats, the thermal fuse opens to cut off power to the dryer. The thermal fuse cannot be reset–if the thermal fuse is open, it must be replaced. Dryer thermal fuse located on the blower housing.

Does unplugging a dryer reset it?

Resetting your dryer is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the dryer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.

Is there a reset button on dryers?

Many dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes. Then push the reset button. If there are no problems with the motor, switches, or electrical system, this should restart the dryer.

Why does my Maytag dryer not heat up?

If your Maytag dryer is not heating, it is possible that it is not being supplied with the proper voltage. Most electric dryers require two legs of 120 volts AC that is equal 240 volts. If one leg of voltage is shut off by a tripped breaker or blown fuse, the dryer may be able to run but it will not heat.

How long does a tumble dryer last?

How old is your tumble dryer? A tumble dryer should last for around ten years. Updating your tumble dryer every ten years means you can benefit from new technology and more efficient heating methods which may reduce energy use and save you money on your bills.

Is it better to have a gas or electric dryer?

In general, gas dryers are more efficient than electric dryers. That’s in part because gas dryers heat up much more quickly and generate more heat overall, which in turn dries clothes faster.

What is L2 on Maytag dryer?

An L2 (Low or No Line Voltage) Error code indicates that there may be a problem with your home power supply, keeping the dryer’s heater from turning on. The dryer will continue to run when this error code is present. Touch any pad to clear the code from the display and return to the estimated time remaining.

How do you reset a Maytag?

  1. Press the “Power/Cancel” button. …
  2. Push the appropriate button to choose a new cycle.
  3. Press “Start/Pause.” You have now reset your Maytag washer.
What does the code PF mean on a Maytag dryer?

A PF (Power Failure) error code indicates that the drying cycle has been interrupted by a power failure. Touch and hold START to restart the dryer cycle or press POWER to clear the display. … Then reset the circuit breaker and monitor the dryer for one (1) minute to ensure the error code does not display again.

Where is the thermal fuse located on a Maytag Bravo XL?

The thermal fuse for your model is on the top of the blower wheel housing. The service manual tells you how to access it after you remove the front panel.

Why is my Maytag dryer making noise?

When your Maytag dryer is squeaking or squealing, there are several part malfunctions that could be the cause: Worn drive belt: the drive belt rotates the dryer drum. Over time it can become frayed or torn, resulting in a squeaking sound. In this case, the drive belt will need to be replaced.

Where is the thermal fuse on a dryer?

The thermal fuse will be located somewhere by the exhaust vent on your dryer. You will be able to visually identify it by the two wires connecting to it. Removing the front of the dryer and removing the drum might be easier to access the fuse’s location.

Why won't my clothes dryer turn on?

Common dryer issues include a faulty door switch or start switch and control problems such as a broken dryer timer or faulty electronic control board: … If the drum light doesn’t turn off, a failed door switch is the likely reason the dryer won’t start. A blown thermal fuse often prevents an electric dryer from starting.

Can a power surge damage a dryer?

Power surges are sudden voltage increases in a home’s electricity supply that can damage expensive electrical items such as washers, dryers and refrigerators.