Decoder Off is displayed when the receiver is not actually receiving an audio bitstream from your playback device. When you are not playing anything, the screen should say decoder off. This is normal and not a fault.

Keeping this in consideration, what does it mean when it says decoder off?

Decoder Off is displayed when the receiver is not actually receiving an audio bitstream from your playback device. When you are not playing anything, the screen should say decoder off. This is normal and not a fault.

Furthermore, why does my Yamaha receiver keep cutting out? In many cases, premature shutoff of your unit can be caused by a problem with the speaker wiring between the receiver and speakers. A single strand of wire in the wrong place (causing a short circuit condition) will cause the unit to shut off at anything but very low volume levels.

Likewise, people ask, how do I reset my Yamaha receiver?

RX-V571 Resetting/Initializing the receiver to factory settings

  1. Set the unit to Standby by pressing the Power button.
  2. While holding down the Straight button, press the Power button.
  3. SP IMP.
  4. Press the RightProgram Arrow button repeatedly until INIT-CANCEL comes up.
  5. Press the Straight Button repeatedly until INIT-ALL comes up.
  6. Press the Standby button to turn off the receiver.

What does PCM mean on Yamaha receiver?

pass through

Related Question Answers

What is PCM audio output?

Pulse-code modulation, abbreviated “PCM,” is a form of digital signal that is used to represent analog data. Depending on the model of television you watch, switching the audio output to PCM may improve the sound quality of the television's speakers.

Which is better Dolby or PCM?

Yes, PCM is uncompressed audio, whereas Dolby Digital is compressed, which compromises quality for space. Dolby TrueHD, on the other hand, is a lossless audio format, like a zip file, which is identical to PCM, in theory (I won't get into that debate). That's like asking if CD's sound better then MP3's.

What is a decoder on a receiver?

An integrated receiver/decoder (IRD) is an electronic device that has the ability to capture as well as convert digital data transmitted from a radio-frequency signal. An integrated receiver/decoder is also known as an integrated receiver/descrambler.

What does PCM mean on a receiver?

pulse code modulation

How do I turn on the arc on my Yamaha receiver?

You can enable or disable the audio return channel (ARC) function within the setup menu of in receiver. Make sure that you have ARC turned on. Using the Yamaha remote, press ON SCREEN, go to Setup, and select HDMI. In the HDMI menu select ARC and turn it on.

How do I update my Yamaha receiver?

Press the PROGRAM left or right buttons on the front of the receiver until the display shows “Update USB.” 6. Press the INFO button on your receiver to start the update process. Have a little patience (or a cup of coffee) – it can take up to 20 minutes for the update to install.

Why does my Yamaha receiver keep turning off?

In many cases, premature shutoff of your unit can be caused by a problem with the speaker wiring between the receiver and speakers. A single strand of wire in the wrong place (causing a short circuit condition) will cause the unit to shut off at anything but very low volume levels.

How does HDMI ARC work?

HDMI ARC stands for “High Definition Multimedia Interface Audio Return Channel”. ARC allows for the “upstream” and “downstream” of signals over a single HDMI connection between your TV and any ARC-equipped A/V deices. This allows for the use of a single remote for all of your connected devices most common functions.

How do I reset my Yamaha keyboard?

System Setup Reset:

1) Turn OFF the keyboard. 2) Press and hold down the rightmost white key (C6) while turning ON the keyboard. 3) Once the power is ON, release the key. The keyboard will reinitialize the ‘System Setup' parameters to the original factory settings.

What is memory guard Yamaha receiver?

The Memory Guard system found in our receiver's “locks”, or prevents alterations of certain settings found within the set-menu system, as well as some DSP parameters. This prevents accidental changes from being made to your system.

How do I reset my Yamaha RX v673?

RX-V673 Setting Receiver Back to Factory Settings
  1. Set the unit to Standby Mode using the Main Zone Power button.
  2. While holding down the Straight on the front panel, press the Main Zone Power button.
  3. When SP IMP -8ohms Min or SP IMP -6ohms Min comes up on the reciever panel, let go of the straight button.

How do I reset my Yamaha RX v371?

Press and hold the ‘straight button”, then press and hold the “start button” till you see the menu. Than turn off the receiver and it will be factory reset.

What does PCM mean?

per calendar month

What is PCM DTS Dolby Digital?

Dolby Digital and DTS are lossy digital compression algorithms that encode one or more PCM channels into a bitstream for storage, and then decode that bitstream back into one or more PCM channels for playback. Dolby Digital and DTS may encode that 8.3GB of PCM audio to ~800MB and suffer only a minor loss in quality.